BITS fails to start with error 2147942414 (0x8007000E)

Similar Questions

• EBS fails to start with error afpoload

  Hello
  
  All on a sudden our EBS refuses to start with the following error message. We are on 12.0.6 version, and did not any changes recently. As it is an instance of production, we should be reviving a SR tomorrow when getting to work, but just thought of posting here - just in case some of you have been there earlier. Fast ideas will be highly appreciated.
  
  
  ORACLE APP-FND-01564 942 error in afpoload
  
  Cause: afpoload failed due to the ORA-00942: table or view does not exist.
  
  The SQL statement being executed at the time of the error was: select NODE_ID from FND_NODES where SERVER_ID =: asid and was executed from the file & ERRFILE.
  
  
  Concerning

  Hello

  Changes have been made recently?

  Select FND_NODES where SERVER_ID = NODE_ID: asid and was executed from the file & ERRFILE

  You will find FND_NODES table in the database?

  Have you tried running AutoConfig on the node in database/application layer and see if it helps.

  Please check the file application.log for more information about the error. If no error is detected in the newspapers and the above did not help, then please get the FRD file and post the complete error here.

  Thank you
  Hussein

• Defender fails to start with error 0x800106ba after application Vist SP 1

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  You have already discovered, your AV closed your Defender Windiows because your AV has his own Defender, and having 2 defenders on the same machine will create conflicts.

  List of the AVs that will stop Windows Defender are...

  Microsoft Security Essentials
  Norton
  MacAfee
  AVG

  Canoe uninstall you or reinstall Windows Defender. It is part of the operating system. He lives and dies with the system.

  You do not get 0x800106B error code if you try to open Windows Defender, which is disabled by your AV.
  So, question:
  What did you want to do what it will take to open Windows Defender?

  If you try to enter the startup programs, you can do without going through Windows Defender.

  Start < in="" the="" search="" box,="" type="" msconfig=""> Startup tab > here is the list of startup programs...

  To disable - uncheck the box.
  To activate the checkbox....

  WARNING: Make sure that you know for sure to turn it off. If you are not sure, ask first.

• Search service Windows fails to start with error-2147218174

  Windows search has stopped working for my Outlook emails and other areas of the system, I went into the service panel and tried to start the Windows Search Service.  He was able to start with the error 2147218174.

  My first question: what does this number mean?  This number gives a clue as to the cause?

  I tried SFC, but system files are ok.

  I ran the store search & index, but who could not fix, because the service does not start.

  A discussion for a similar sounding problem, Microsoft asked a user to set a may be corrupt user profile by copying to a new.  But this has not fixed the problem for this user, so I probably shouldn't waste time with this step.

  Windows system event log contains the following entry that could give an additional hint:

  DCOM got error '1053' attempt to start WSearch service with arguments "" to start the server: {9E175B6D-F52A-11D8-B9A5-505054503030}

  Around the time this problem started to happen I upgraded a data disc to a hard drive different and changed the drive letter of this data.  Could he have mistaken the search services with the existing database of index and somehow prevents the service to start?

  By chance I came across a possible solution.  I went to "Indexing" / Advanced Options / rebuild the Index and now the Windows Search Service shows that it is "started".

  I am surprised that I have not read this suggestion on the forums of Windows support in response to questions from the other user has the same problem.

  It will be interesting to see if it works in the long term...

• Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

  Charge installation of Visual Studio 2010 Professional on Windows 7 64 bit
  Picked up SP1 before you run the first time.

  Running fails with:
  ---------------------------
  devenv.exe - Application error
  ---------------------------
  The application was unable to start correctly (0xc000007b). Click OK to close the application.
  ---------------------------
  Ok
  ---------------------------

  The Dependency Walker tool lists the following messages:
  Error: at least a module has an import unresolved due to a missing in an implicitly dependent module export function.
  Error: Modules with different CPU types have been found.
  WARNING: at least a delay load dependency module was not found.
  WARNING: at least a module has an import unresolved due to an export feature missing in a dependent module of lazy loading.

  There are two 64-bit dll that is referenced:
  IESHIMS. DLL and MSVCR100. DLL

  I can copy MSVCR100. DLL from C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\x86 in C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE (next to devenv.exe) and I get the splash screen.  However, before the same load completely blocks.  Added an IESHIMS to 32-bit. DLL of C:\Windows\winsxs does not solve the startup crash problem.

  Not quite sure what else to try, any advice would be great.

  Hello

  For assistance on this issue, you can ask your question here:

  Installation and configuration of visual Studio

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• HotSync fails to start with error message

  I'm on a Palm Tungsten E2 on a desktop and a laptop with Windows XP Professional: I regularly Hotsync my Palm on the two, always selecting 'no action' for the system. Unfortunately the last time, by mistake, I chose for this option "Desktop replaces Palm", and, since then, Hotsync does more: pushing the Hotsync button I immediately get the message 'SystemMgr.c, 4038 Error launching application online. The reset button does not solve the problem. Same launch Hotsync in the Applications Launcher. Data on the Palm are unchanged and everything works very good about it, but I can't sync more wiyth my PC.

  Any suggestion? Thank you

  I just paid how to solve my problem. In my post, I said that Reset did not help. I should have specified that reset "smoothly" did not work. I did a Hard Reset, removing all the data on the Palm and Hotsync now works perfectly. I recovered all the data from the Dekktop.

  Thanks for your inquiry.

• Program fails to start with error is "C:\Windows\sysWOW64\mfc42ca2.rra 0 x 5 access is denied."

  Original title: c:\windows\sysWOW64\mfc42ca2.rra access denied 0x5

  What causes this error. message that I get when I use a program installed on my computer

  What program?

• KB963671 update continually fails to install with error 80070652

  I have a HP Pavilion dv6000 laptop under Microsoft Vista Home Premium (32 bit).  My Windows Update is configured to be installed automatically, but there is an article that fails to install every day.  The update by using the Microsoft Script Editor (KB963671) fails to install with error 80070652 code.  I read this error code indicates failure prerequisite installation/update, but I don't remember that ever happening.  When I run Office Diagnostics, everything comes out very well.  I searched the Microsoft discussion groups and communities, but have not been able to discover a solution.  Any help or insight would be greatly appreciated.  Thanking you in advance for your help.

  -Vince

  Hi U07348,

  Have you tried to install the update as a stand alone.
  Here is the link to download the update by itself.
  http://support.Microsoft.com/kb/963671
  If it does not install to proceed with the following steps.
  Step 1
  Download and install Windows Installer 4.5
  http://support.Microsoft.com/kb/942288
  Step 2
  Download and Install CleanUp Utility
  http://support.Microsoft.com/kb/290301
  Let us know if you need help with this problem.
  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Multisim update fails to install with error.

  The regular update fails to install with error: an error occurred in the installation of an update.  If this error persists contact technical support OR.  It comes to Multisim.

  How can this be repaired?

  Thank you

  Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370

  It will help you get a better answer...

  Best regards

  H S

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• 2829361 update fails to install with error 0x80070005 - Win XP SP3

  KB2829361 Windows update fails to install with error 0x80070005 - Win XP SP3

  Thanks for the reply, but I reinstalled Outlook 2003 and that solved the problem.

• KB829019 NET framework 2.0 fails to install with error 0 x 643

  KB829019 NET framework 2.0 fails to install with error 0 x 643.  Downloaded V4 and repaired, but others say that I don't have NET framework is installed

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Some programs require different versions of the .NET Framework must be installed. Programs that can not find .NET Framework are very likely looking for a version that is not installed.

  For more information on the .NET Framework, you can take a look at my ISP note you like:

  http://taurarian.MVPs.org/framework/Net_Framework.htm

• My CS will not start with error code 16

  How can I find the serial number CS5.5 under MAC OS X if I want to reinstall it? My CS will not start with error code 16, he says: configuration error.

  Please visit the Doc KB: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

• Failed to load with error [3303

  Hi, guys.
  
  Can someone help me?
  
  When I run the odi interface to load data from oracle 11g to essbase-essbase 11 demo data base;
  
  the case is:
  
  Failed to load with error [3303
  
  C1_YEAR, C2_MARKET, C3_PRODUCT, C4_ACCOUNTS, C5_SCENARIO, C6_DATA, Error_Reason
  ""Qtr2', 'Is', 'Audio', 'Margin', 'Real', 1 ', ' failed to load with error [3303: Qtr2, East, Audio, marge, real, 1 member not found in database.]
  
  and newspapers is
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 26, < module >
  at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 1
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  
  Thank you!

  You use a rule to load? It seems to me that you are not correct separator between ODI and essbase.
  It seems that you all members of loading as a single string when they should be spaced, check in the options of revenge against the State of charge and make sure they have the same delimiter.
  By default in the IKM will be fixed to the comma, in the rule of load, it can be set to the tab, open the rule of load, go to Options > data source properties > make sure that the separator is the comma.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE