Plugin Flash races to come, has no sound, since the upgrade to Ubuntu, why?

Similar Questions

• Mac has been freezing since the upgrade to El Capitan

  My mac froze just (since the upgrade to El Capitan) still today while on the internet. Has written on this subject before and submitted to the reading of the Console application, but there was no response.

  Message on the console of today reads:

  In the menu of Queries/All Messages to the system log:

  29/03/16 12:10:13.234 PM ReportCrash [7149]: call to spindump for pid = 7118 wakeups_rate = 155 duration = 291 because of excessive Awakenings

  The diagnosis and use of Messages:

  29/03/16 12:10:14.222 PM spindump [668]: com.apple.message.domain: com.apple.crashreporter.writereport.wakeups_resource.diag

  com Apple.message.signature: com.apple.WebKit.Plugin.64

  com Apple.message.signature2: UNBUNDLED | 11601 (11601.5.17.1) ((null))

  com Apple.message.signature3: alarm clocks

  com Apple.message.Result: noop

  com Apple.message.summarize: YES

  SenderMachUUID: 63E4F244-A146-3809-8016-6172E1C11CB1

  Any help would be most appreciated.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• Intermittent drop WiFi: WiFi has been declining since the upgrade to Win 10

  Currently have recent windows 10 version 10586.11 running on the HP Pavilion DV6T-7000qe. Has wifi connectivity problems since then with the drops or slow internet. No other device having problems, just this laptop. Running sfc scannow and everything is fine. HP supprto has more drivers to win 10, which suggests that microsoft is now offering the latest drivers to win 10. It is these drivers I think that my problems are the cause.

  I have already had no problem WiFi with win 7, or before winning 10 started downloading the new drivers automatically. It's frustrating as I like winning 10 so far.

  Should I go directly to Intel for my network card for Centrino N-2230 card driver?  Please advise, thank you.

  Hello:

  Intel doesn't have a W10 driver for the 2230.  You can try the W8.1 driver.

  The 2nd on the list is for the 64 bit OS.

  https://Downloadcenter.Intel.com/download/25511/Intel-PROSet-Wireless-software-for-Windows-8-1-

  What you can do to prevent the installation of drivers that are ruining your PC W10 is hide updates using this tool.

  Download and instructions on the link below.

  https://support.Microsoft.com/en-us/KB/3073930

  Updated skin is permanent, unless you run the tool again and uncheck the hide option.

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have not been able to get flash since the upgrade to 7.0.1 using the Linux Debian operating system.

  I was not able to get the flash player since the upgrade to FF 7.0.1 on Debian Linux. I followed the instructions in "How do you install the Flash plugin? (https://support.mozilla.com/en-US/kb/installing-flash) several times.

  As I said this is a problem since the last update. I was able to get flash working in earlier versions. Flash works in the Debian version of FF "Iceweasel".

  You are running a version of Firefox 32 bit or a version of Firefox 64 bit-to-bit?

  You must use the same Flash plug-in to make it work (32 bit Flash with 32-bit Firefox).

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• Pavilion dv6700 entertainment: loss of sound on pavilion dv6700 since the upgrade to Windows 10

  Since the upgrade to windows 10 I lost my audio... can not play MP3 music and the system sounds don't work... wanted for driver sound card and found three recommended... each of them has reported a hardware not found... decided to reinstall the driver of sound card on my install of windows 7, as luckily I backed up all my drivers before moving on to OS10... even if it is installed, still no sound... removed devices and drivers and let the laptop reinstall after rebooting... do not know what else to try... do not believe that there is a sound muting function key that I do not know... Thank you

  UPDATE...
  just try the idea of setting frequency to 16-bit 9600, but I got no sound error box [...], then is alle went settings improvements where she has low etc etc settings has been disabled so it allowed without choosing any of... then I went back and changed the default frequency which is 24 bit 19200... then told me not supported by this device but then miraculously it worked... have now all music sound restored windows all... don't know if still have windows 7 driver... it is MS 2008... really afraid to update the driver because it is all now work... don't know how I fixed it but, was it a particular action? or a combination...? Maybe this might help others...

• HP Officejet Pro 8000 has stopped working on the upgrade to Snow Leopard (10.6)

  Since the upgrade, despite the HP and Apple claiming that the upgrade would take care of things like new drivers, my 8000 Officejet Pro has stopped working. Of course, this could be a coincidence and something else caused the problem.

  Quite simply, the printer button will Flash. The manuals indicate it means need new paper in the tray, or there is a jam. In addition, the print utility said 'in paper '. Of course, I have no jams, and there are 40 pages of paper in the one and only the plateau.

  I deleted the printer in "Print & Fax", turned it off, unplugged the USB and then added back, twice, everything to nothing doesn't. Nothing changes. Still unable to print.

  It doesn't seem to be anything I can try. This page, "Mac OS x: installation and use of the product in Mac OS X 10.6", simply going to say that I should remove the printer and add it, which of course I did. There are no other suggestions for what I could do.

  So either 10.6 broke my ability to print, or the printer is otherwise defective and must be returned under warranty. Any ideas?

  Thank you.

  Update...

  has gone through a series of emails with HP support, during which, with all due respect, I asked me to do what I had already tried. We got to the point where we were providing for the printer to be returned under warranty. Then yesterday morning, bam, the printer works again. No explanation and no idea.

  Best regards.

• Details option is no longer appears in the window of security since the upgrade to El Capitan. Is there a way to selectively remove cookies and plugins?

  Since the upgrade to El Capitan, is no longer the details option appears in the Security window in safari preferences. Is there a way to selectively delete cookies and plugins, without deleting them all?

  Select the Privacy tab and click on details...

  

  Plug-ins can be managed in the Security tab, selecting the plugin settings...

  

• P7-1174: sound card not working do not since the upgrade to 10. Can not find the driver to download

  Since the upgrade to Windows 10, my speakers do not work.  They seem to be good and have been working well before 10.  I can only find a driver for the sound card and I get a message that it can not be downloaded for my protection.  Any thoughts?

  Hello:

  See if this driver works for you...

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp70787.exe

• Windows XP closed shut and restart do not meet demand. It has only happened since 01/01/2012. Why?

  Windows XP stop system will respond only to the hibernation or standby. Shut down and restart do not meet the demand. It has only happened since 01/01/2012. Why?

  Hey IanForbesUH,

  You said that you have received errors, please post what were these errors. This will help us figure where your system is having issues.
  have you tried restarting your computer in last known good Configuration? Make sure to save all your media because it restores your system to how it was on the selected dates.
  To do this: restart your computer. Immediately after the screen turns off for the first time, press the F8 key repeatedly. Selectlast known good Configuration and press ENTER. Windows XP attempts to start.

• Problem with a VM server: "the virtual disk parent has been changed since the child was created.

  Hello!

  I have a problem with a server that does not start.

  We had a virtual machine running on VMWare Infrastructure 3 with two hard drives and an instant backup of them.

  This machine has been removed from the inventory, but when it has been recreated, the secondary hard drive is mentioned for the basic-disk vmdk
  instead of being referenced to the instant vmdk and used for a few days.

  All changes made after the snapshot, were kept in the delta snapshot file, which is not loaded.

  We are with difficult to reference the secondary disk for the snapshot file. We tried to edit the .vmx and hard disk files
  to correct the CID made reference, but when we try to start the virtual machine, we got this error:

  "The virtual disk parent has been changed since the child was created.

  I think it happens because we made a blow-up of a secondary drive a few weeks after the backup snapshot. We spent 30 GB to 50 GB.
  And because it has been referenced and used in another vm.

  *** Log is attached

  Thank you

  Bruno.

  It is a bad sign

  next step in the usual forest is to use "testdisk" since a LiveCD to set the tables MBR and partition - if possible

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

• MacBook Pro has started to randomly stop when it is on battery since the upgrade to El Capitan

  I have a MacBook Pro (15 inch, early 2011) which works very well on the Mountain Lion for a long time. I finally got round to upgrading to El Capitan last week: directly to 10.11.6. A few days later he just powered down without warning while I was working. He was so very well for a few days, but then made several times in the last 48 hours.

  I am moderately sure it happens only when it is on battery (it did not in the past hours 8 while that plugged). Whenever it happens, that there is no warning and the Mac then fine restarts (manually) - Although the clock resets always in 1970 until he can contact an NTP server. One of the curious side effects is that my PostScript fonts were blank on the screen in Excel for a few reboots yesterday but then OK once again!

  No hardware has changed. Major software change is only El Capitan and possibly an iStat Menus update.

  I have reset PRAM and SMC. I ran the short AHT. I disassembled the machine and clean the fans. they were OK, but the problem seems to occur when the Mac is hot.

  Spotlight and Time Machine sometimes seemed to be struggling for the upgrade, and I also saw rpcsvchost with 100% of a core for a while. The machine feels sometimes slow - but for the last 8 hours, it was very good. The only model that I put in place, is that it seems to occur only on battery; It's even happened then that the Dock (etc.) were loading after logging in after an unexpected shutdown.

  The other thing common is in the newspapers every time:

  Cause of previous stop:-128

  I scanned a number of related posts to aspects of it, but do not look at who blames El Capitan rather than material. Yet, many people reported this kind of problem after the upgrade... Coincidence?

  Any ideas?

  Thank you.

  Cause of previous stop:-128

  A negative stop code generally indicates a hardware failure. Have the Apple to assess your Mac. The fix may be as simple as a spare battery.

  Start here: contact support

• Message Notification has stopped working on the upgrade of Maverick

  New Message of Notification stopped working since I upgraded in Maverick.

  Help, please...

  

  I found the 'solution' of my problem. It has been... 'My State '! I put it to "DND" and the app stop all notifications!

  It is not intuitively!

  Developers of Skype, please inform users about this behavior in the Notifications on Preferences tab!