Black and white with a solid in the image color

Similar Questions

• black and white (square) blocks appear in the images while editing.

  While editing images in photoshop cc, blocks black and whites (square) appear in the images and mean that no editing can be done in this part of the images.  I had my graphics replaced on my iMac, so this isn't a hardware problem.

  Anyone else having this problem?

  You can also try to pack the settings of your graphics card.

  Uncheck the box open CL and drawing Mode the normal value or base.  Restart your computer.

  

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• Hey, how to choose a color for a gradient? It only allows me to do black and white or a solid color

  Hey, how to choose a color for a gradient? It only allows me to do black and white or a solid color

  1. Select a point of gradient
  2. Change the color in the color palette (you may have to use the wheel of color palette menu to change the color mode), or drag a swatch swatch on the gradient stop form or option click a swatch in the Swatches palette

• Black and white with color + Saturation

  I worked in Lightroom 4 on a picture that I took and I just like I want (these adjustments are to increase the saturation on certain colors on the STL tab). Now I'm doing the top half of the image just in black and white, but when I chose the adjustment brush and sturn Saturation to the low top-100 and start going on half top of the picture, some colors (those I turned the Saturation upward on the tab STL) tarnish a bit but will not completely black and white. Someone at - there a way around this?

  If you're just do half a picture, a graduated filter (perhaps several of them stacked) with 100% dlse and pause for a quick transition would work.

  Otherwise you could stack multiple instances of the adjustment brush until you drive all the color on.

  Web-Weaver is correct in noting that is a job best suited for the PS

  

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• I burned a dvd using windows dvd creation, when I watch it, after the first 20 minutes, that the image becomes almost black and white with pink exaggeratted shadows. WHY?

  I am compiling my football teams game film.  I created a dvd using Windows DVD Maker.  Each game is a single video file to AVI format.  When I preview the video, no problem. After having carved, (2 trials) when I watch the DVD, the menu screens look good, the video of the first part looks fine, but from second game, or of the stage, the video quality changes.  The video becomes almost black and white.  The shadows and the highlights of the video seem to be exaggerated and that they are pink color.  It seems to be an effect of video editing, but I did no changes to the video features.  Help.

  HI Maria,

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly you are facing a problem with the DVD created in Windows DVD maker.

  I'll do my best to get the problem resolved.

  You can go through the steps in the article and check if it helps. Here is another article on changing some settings of the DVD creation. Go through it and tell us if it helps.

  You can also see the article for more information about video filters in Windows DVD Maker.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• HP3209a not printing black and white enamel but will display the web page

  I'm on Mac OSX10.8.  My HP Photosmart 3209 has suddenly stopped printing yesterday and had a pop up that says I got printhead problems.  I spent two hours on the phone this morning with two so-called experts feel, the first who said that the problem was with my iMac (he couldn't find it) and the second who said it was a problem with the printer (he couldn't find it).  The printer is connected to an iMac by USB cable.  It will not print e-mail or most of the pages of black and white but now curiously print a web page. BTW, I put new ink in it and did not help anything, and Printhead Cleaner ran about two dozen times.  I try to run an alignment but the page it prints which is for most of the blocks of color blue on half a page is not recognizable on the scanner when I try to run the alignment.

  I think that you always print head problems.  Go to System Preferences > print & Scan.  Click on your printer, click Options & supplies.

  From there, go to utility > Open Printer Utility, then clean the print head.

• Can I print in black and white with an empty cartridge on a printer HP Officejet Pro 8100?

  Only the cyan cartridge is empty, all the other 3 cartridges are fine. I ordered the cartridge cyan online but I need to print important documents today. The power button blinks when I try to print.

  I do not understand, black and white must not use a color cartridge to print.

  Is there something so I can print before receiving the cyan cartridge?

  The printer Officejet Pro 8100 has the same print mechanism like its counterpart of all-in-One Officejet Pro 8600.  This printer has a print head mechanism that contains 4 individual cartridges: CMYK (cyan, magenta, yellow, black).

  It will replace the cartridge if the unit provides a message from one of the colors being empty, until the unit will resume printing.  This is a retention mechanism to avoid the product from damage.  I hope this helps.

• New Apple MacBook Pro. Contrast of black and white not as sharp as the previous MacBook Pro. How please

  Not as strong black and white contrast on my new Macbook Pro retina adjustment last version of El Capitan. The black color is certainly lower than in my previous MacBook Pro. The contrasts are not as sharp and the screen has a grayish tint which I'm having a difficult time of adjustment. It is not my eyes. Any tips? Thank you. WillyG

  Did you try System Preferences > display > color and CALIBRATE?

  

  Ciao.

• Photos of switch color black and white when I drop in my images and My Documents and

  When I download pictures from my camera chip, they are in color, but when I size them and their case they are black and white in the doc and my photo files.
  How can I fix it so they deposit in the original color?  Thank you.

  Change the setting in any application (care to identify it?) that you use to size and drop your images so that the images are not converted.

• How to display a column with a representation of the image color in Windows Explorer on Windows 7?

  OK, here's my situation...

  I have a directory with 300 + JPG images in it; I'm hoping to use some (if not all) of these images for a project.

  However, the project has very specific requirements for the image dimensions, resolution, and a representation of the colors; So I need to evaluate the supplied images to validate if they are all in line with these requirements.

  If I right click on an individual image and choose Properties - then click on details, I can see the image information such as:

  • Dimensions,
  • horizontal resolution,
  • vertical resolution, and
  • color representation.

  ... which would be perfect if I had only 1 or 2 images to cross; but with more than 300 images, it becomes cumbersome.

  So: I put the "Détails" view folder and added columns for dimensions, horizontal and vertical resolution resolution.

  This helps my cause, because I can then sort the directory... and quickly see if the images are too small, too big, or unacceptable resolution.

  However, I have not found a way to add a column for the representation of colors.

  Is it possible to add a column for the representation of colors?

  Hello

  Unfortunately there is no other option to define the representation of colors in Windows Explorer. If you want to provide feedback about it, then check out the link:

  Windows 7 comments

• Unable to print black and white with no yellow ink L7590

  I ran more ink at the weekend and got a new black ink cartridge. Unfortunately, I did not notice that I was also out of yellow ink. I desperately need to print regular black text, but the printer refuses because he is more yellow ink! I don't want print Yellow. Is it possible to disable this error message for a HP OfficeJet Pro L7590?

  Thank you.

  Nevermind, I figured it. If you set the printer on the mode of manufacture, it ignores the ink levels. Sorted.

• Black and white with color...

  I have a picture of a group of people. I would like to isolate a single individual. I want to make everyone in the BW photo, with only the person isolated in color. Does anyone can tell where I can find a tutorial for this action?

  To this topic on the Forum: convert to B & W, but leave part of color image