Black and white with color + Saturation

Similar Questions

• Black and white with color...

  I have a picture of a group of people. I would like to isolate a single individual. I want to make everyone in the BW photo, with only the person isolated in color. Does anyone can tell where I can find a tutorial for this action?

  To this topic on the Forum: convert to B & W, but leave part of color image

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• My iPad3 is only in black and white, no color at all. help please.

  After overnight battery charging, in the middle of the night, my iPad3 began and woke up the House with music strong and graphic of an unknown game for me.  The battery charge was at 7% even if she had been on royalties for ov er 5 hours.  All the graphics were in (negative) reverse black and white with no color.  I would appreciate and advice from the community and wait here on your part.

  Settings > general > accessibility. Watch invert colors or levels of gray. They both should be set to Off.  Maybe a power surge caused the problem?

• Convert a color photo to black and white to color with key frames

  Im sure must be simple enough, but I could not understand. I have a color image I want to gradually appear first as black and white and then more return its original colours that make the transition to produce a nice flashy effect we hope

  I tried to apply the black-and-white effect, but I only get a picture of BW and can't see how to do the image colored again by keyframes. Ive google the issue and youtubed it too but have not found what I was looking for (Hi Bono!)

  ID appreciate any help, thanks

  Only one way to do it: If you apply the effect (TLS) color Balance, you would be able to the saturation property keyframe/expression.

• Black and white with a solid in the image color

  Help, please! I'm so stupid and for some reason any I do not understand this! I'm trying to take a black and white photo of a flower, and ONLY make the flower in color... as a layer... I tried to use the adjustment brush, but this doesn't quite work... Everyone? Suggestions?

  It's called selective colouring:

  http://www.steves-digicams.com/Knowledge-Center/how-tos/photo-software/Lightroom-how-to-do - selective - coloring.html #b

  Enjoy!

  Janelle

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• I burned a dvd using windows dvd creation, when I watch it, after the first 20 minutes, that the image becomes almost black and white with pink exaggeratted shadows. WHY?

  I am compiling my football teams game film.  I created a dvd using Windows DVD Maker.  Each game is a single video file to AVI format.  When I preview the video, no problem. After having carved, (2 trials) when I watch the DVD, the menu screens look good, the video of the first part looks fine, but from second game, or of the stage, the video quality changes.  The video becomes almost black and white.  The shadows and the highlights of the video seem to be exaggerated and that they are pink color.  It seems to be an effect of video editing, but I did no changes to the video features.  Help.

  HI Maria,

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly you are facing a problem with the DVD created in Windows DVD maker.

  I'll do my best to get the problem resolved.

  You can go through the steps in the article and check if it helps. Here is another article on changing some settings of the DVD creation. Go through it and tell us if it helps.

  You can also see the article for more information about video filters in Windows DVD Maker.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• image to move from black and white to color through a circle grows

  I'm trying to figure out how I can make an image black and white turn to color in a circle in the Middle get gradually bigger, until it is as big as the image.

  If the image is available in black and white and then turns to color outside the community. Any help received with gratitude that I am a beginner and can not find the

  answer in my tutorials. Thank you.

  Duplicate the layer, use a circle effect with the blend mode set to Alpha stencilled on the top layer and animate its RADIUS.

  Mylenium

• Lightroom black and white to color

  When I download my pictures from my camera to lightroom 2.2 it takes pictures that I shot in black and white and converts them into color t-anyone knows if there is a setting or a way to avoid this?

  Hi Andrew

  I'm assuming that you are shooting in RAW. If you take photos in JPG format, you will get the black and white photos. The reason why you see a black and white in reading on the camera must be because the camera shows a preview in black and white.

  Fortunately for you, RAW capture red, green and blue and combines them into a picture, your photo. If the RAW converter in lightroom necessarily combines the components, which makes a color image.

  It's a good thing. RAW images capture as much as possible, if you have a lot of information and details for a shot as possible.

  Black and white conversion in lightroom allows you to play with colours by photos. If she has imported black and white you would have lost so much information.

  What if you came home for a shoot and directed a shot could have been great in color, or you rushed to film a sunset forgetting that the setting was on black and white...

  To make the lightroom import photos in black and white, you will have to do a develop preset.

  more simple way, forgive me if I'm teaching to suck you eggs.

  1. open lightroom

  2 goto development

  3. click on shades of gray in base salary

  4. right click on the thumbnail on the bottom which is now black and white go gold the PRESETs on the left of the screen by opening the Panel if ifs not here and click on the +.

  5. enter a name of the preset - import IE black and white

  6. Select Auto Grayscale Mix

  7. click on create

  1 preselection made

  To import

  1. click on library

  2. click on file and import - from the disk, the system...

  3. Select the files you want to import as a black and white, check them while they are selected

  go to the development parameters

  has chosen the basic settings and

  According to the information to apply develop settings and select from the drop-down list select import in black and white

  and then import it.

  The pictures you have selected then will be black and white.

  It will work - you may need to remember which photos were black and white as thumbnails in the import dialoge may not be black and white.

  I'm not black and white I want to play with the color that I made in black and white.

  Mode shooting black and white means that you can NEVER have a color version of the photo, so you may lose is a beautiful photo of your bet.

  As you use Lightroom, you're messing around with the images, so shoot color, and then click Grayscale and play them with the mixture of shades of gray, you'll have a lot more fun.

  But who is mentioned above process will bring your black and white photos.

  Hope that helps you

  (I still shoot color and convert every time - even if jpeg)

  Hamish

  www.hamishniven.co.za

• Can I print in black and white with an empty cartridge on a printer HP Officejet Pro 8100?

  Only the cyan cartridge is empty, all the other 3 cartridges are fine. I ordered the cartridge cyan online but I need to print important documents today. The power button blinks when I try to print.

  I do not understand, black and white must not use a color cartridge to print.

  Is there something so I can print before receiving the cyan cartridge?

  The printer Officejet Pro 8100 has the same print mechanism like its counterpart of all-in-One Officejet Pro 8600.  This printer has a print head mechanism that contains 4 individual cartridges: CMYK (cyan, magenta, yellow, black).

  It will replace the cartridge if the unit provides a message from one of the colors being empty, until the unit will resume printing.  This is a retention mechanism to avoid the product from damage.  I hope this helps.

• HP Officejet L7680: Can I print black and white when color cartridge is empty - HP Officejet L7680

  Help, please!

  Can someone tell me if I can continue to print black and white if the color cartridge is empty.  The product name is HP Officejet L7680.

  Thank you

  Hello and welcome to the community of HP @naristot,

  I understand that you would like to know if you can continue printing in black ink, if one of the color toner is empty. I'll be happy to help you.

  This printer was designed to function as a system of four cartridges, so you must have all four available ink cartridges in order to be able to print.

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• Hi I am using to extend my s video cable desktop display but I am getting only black and white without color help

  Hi, I use a s video cable to connect my laptop to TV screen, to extend my desktop mode, but it's only in black and white I need colors can help you, it comes in the color vga lead but the lead isn't on my tv

  Help

  http://www.TomsHardware.com/Forum/251133-45-Toshiba-black-white-video

  I google your question and according to the above thread, your cable is bad and you need a new.

• Director of Windows capture only in black and white no color

  while trying to capture video from the color, it captures only in black and white

  Does not appear to be a 500 GB hard drive, but it can be
  a partition that uses a part of the training. In any case...
  you have enough free space and that's what I was afraid
  everything.

  I think it may be interesting to try to update your video driver.
  There is a recent version (18/01/2011) for your Nvidia Geforce
  6800 video card.

  GeForce/ION Driver Release 266.58
  http://www.nvidia.com/object/WinXP-266.58-WHQL-driver.html
  (do not forget to consult the list of "supported products" to check that)
  your video took card supported)

  A way to check the make and model of your video
  adapter is to launch the Device Manager by clicking on...

  Start/run and type or copy / paste:

  devmgmt.msc

  And then press ENTER.

  Expand "Graphics cards" by left clicking the +.

  Right-click on the name of your card and choose...
  Properties / driver tab... This will display the name,.
  Version number and the date of the driver.

  Download the updated driver for your computer desktop and the left
  Click to install. There is some info to install it at the following
  link:

  NVIDIA driver help
  http://www.nvidia.com/object/drivers_faq.html#installing

  Personally, I think it's a good idea to disconnect from the
  NET and close all programs, especially of before virus scanners
  installation of the driver.

  If you decide to try it... maybe... I mean just maybe you
  will be able to capture your video in color.

  Good luck...