Can I print in black and white with an empty cartridge on a printer HP Officejet Pro 8100?

Similar Questions

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• Why I can't print black and white if the yellow cartridge is empty but the black is full?

  I have a Photosmart C7250 all-in-one and Mac OS X 10.7 Lion, why can't I print in black and white if a color cartridge is empty? The black cartridge is full, it is not the only one to be used? Is there a setting somewhere that I can change just print in black? I tried the black and white option through command prompt on my computer but the printer always gives me an error message saying that I need to replace the yellow before I can print.

  The reason that this, your printer is actually not to damage the internal parts.  Mainly the printhead.  It is built in integrated security to help protect your investment.  HP, as other printer manufacturers, offers you with permanent print heads printers requiring ink for all colors, avoid the print heads. HP, like some other manufacturers, also offers printers with user replaceable print heads. These may or may not require ink in all colors in print, even though damage may occur if the print from the cartridge empty. Finally, HP as some other manufacturers also offers printers with the printhead into the ink supply. He is replaced at each change of cartridge. These printers will happily print with a diet low, empty or many deleted completely same models.  I understand that it can be very annoying, but it's a necessary.

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Can't do a black and white film clip

  I downloaded a video clip in Adobe Premiere Elements. I would like to make it's black and white, but the option is not listed under "effects applied. It does not black and white with a few previous sequences located on the same file.

  

  

  Click the effects along the lower part of the program and select the effect of black-and-white film.

  In the meantime, if you need help with the basics of the program, I recommend that you check out my basic training tutorial free 8 part series.

  Basic training of Premiere Elements *.

• HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  When I scan I got my photo and all white for the rest of the screen

  It has no function of machine harvest in the 8600 software. To get the exact size, you will need to manually set the size for the scans that you do. You can find the setting by clicking on the blue link to advanced settings in the first scan window. Will take you to a place that will allow you to change the size of the scanning area. Hope that helps.

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• Sort of printing black and white only when magenta cartridge is empty?

  We have a HP Office Jet Pro 8500 a. computer running Windows Vista.

  The Magenta cartridge is currently empty, and we need to print an urgent document before we will be able to get a new cartridge.

  While trying to print a black and white document only, the following error has occurred:

  Exhausted ink cartridges

  HP 940 Magenta

  The cartridges listed above must be replaced to resume printing.

  HP recommends that you do not remove an ink cartridge until a replacement is ready to install.

  Specified in printing dialog windows that we want only black and white, but it is still received this error message.

  Is it possible to adjust the printer settings to specify explicitly that you want to use black ink?

  Thanks for any help you can give.

  This printer takes individual ink cartridges (IIC), and this ink delivery system requires that all cartridges to be installed for the printer to work. You can set the printer to "Using black ink only", but that must be done before a cartridge is exhausted, that the printer inks for other uses in fairest impression. It also uses the ink for the maintenance of the print heads. Here a link to a document that turns to explain various ways that ink is used in a printer beyond just printing.

• I burned a dvd using windows dvd creation, when I watch it, after the first 20 minutes, that the image becomes almost black and white with pink exaggeratted shadows. WHY?

  I am compiling my football teams game film.  I created a dvd using Windows DVD Maker.  Each game is a single video file to AVI format.  When I preview the video, no problem. After having carved, (2 trials) when I watch the DVD, the menu screens look good, the video of the first part looks fine, but from second game, or of the stage, the video quality changes.  The video becomes almost black and white.  The shadows and the highlights of the video seem to be exaggerated and that they are pink color.  It seems to be an effect of video editing, but I did no changes to the video features.  Help.

  HI Maria,

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly you are facing a problem with the DVD created in Windows DVD maker.

  I'll do my best to get the problem resolved.

  You can go through the steps in the article and check if it helps. Here is another article on changing some settings of the DVD creation. Go through it and tell us if it helps.

  You can also see the article for more information about video filters in Windows DVD Maker.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Can I convert to black and white, then add color?

  I was just curious to know if the touch of adobe photoshop can transform a black and white photo and then just add the colors you want. As you can do in CS5

  Hi hemigirl28,

  Yes, this kind of technique can be accomplished with Photoshop Touch, the process may be slightly different than using Photoshop CS5. One of the features of Photoshop Touch is the painting with effects (Saturation, color, temperature, black & white, Dodge Balance / burn, brightness / contrast, Shadows / Highlights, curves, hue, sharpness, comic strip and a pencil). One of the tutorials included with the product market by taking a picture of a horse color, paint the background in black and white and then paint with a saturation increased on the horse itself to bring out. Check out the screenshots in this doc to see what I mean. http://forums.Adobe.com/docs/doc-1372

  -Dave

• Black and white with color + Saturation

  I worked in Lightroom 4 on a picture that I took and I just like I want (these adjustments are to increase the saturation on certain colors on the STL tab). Now I'm doing the top half of the image just in black and white, but when I chose the adjustment brush and sturn Saturation to the low top-100 and start going on half top of the picture, some colors (those I turned the Saturation upward on the tab STL) tarnish a bit but will not completely black and white. Someone at - there a way around this?

  If you're just do half a picture, a graduated filter (perhaps several of them stacked) with 100% dlse and pause for a quick transition would work.

  Otherwise you could stack multiple instances of the adjustment brush until you drive all the color on.

  Web-Weaver is correct in noting that is a job best suited for the PS

  

• Black and white with a solid in the image color

  Help, please! I'm so stupid and for some reason any I do not understand this! I'm trying to take a black and white photo of a flower, and ONLY make the flower in color... as a layer... I tried to use the adjustment brush, but this doesn't quite work... Everyone? Suggestions?

  It's called selective colouring:

  http://www.steves-digicams.com/Knowledge-Center/how-tos/photo-software/Lightroom-how-to-do - selective - coloring.html #b

  Enjoy!

  Janelle

• More than a printer HP OfficeJet Pro 8100

  Hello

  I need to buy two printers wireless to use with an iPad.

  But the thing is: if I install TWO identical HP OfficeJet Pro 8100 under the same wifi network, how can I know that I want to print? In other words, my concern is that when I want to print a document using the iPad it will show two printers, but both with the name "HP OfficeJet Pro 8100". Having in mind that each printer is located away from each other in my house, I need to print under the right printer.

  Is it possible to change the name that appears on AirPrint so I can distinguish the two printers? Something like "Printer-Studio" and "printer-bedroom"? Or something that works somehow...

  Thank you.

  Pedrosacelso,

  It is possible to change the name of the printer, many customers buy more than one printer to a desktop environment and need to change the printer name to identify the printer.

  If you have problems with the above steps back on the support forums.

• Replace a printhead - printer HP Officejet Pro 8100 (N811a)

  Here is a video that will guide you through replacing the print head on Officejet Pro 8100 (N811a) printer.

  If you like this video and would like to see more like it, be sure to subscribe to the HP's YouTube channel.

  I hope this helps.