Tecra A10 with replicator - no output to the DVI port but analog works very well

Similar Questions

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello

  Please try following the steps and see if it helps

  1. Please work through this guide.

  https://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  Follow the instructions in the guide on the provision of the dxdiag report and additional information on what you tested and observed.

  2 turn off hardware acceleration in the settings. Steps are mentioned in the link below

  How to disable or enable hardware acceleration?

  Thank you

• 12 Firefox on OS Lion does not obtain the crash report on a second account on the past. On the main account (admin) it works very well and also on a third test account.

  12 Firefox does not get beyond the crash report. This is a second account (standard). However, it works very well on a third party, as well as on the main one admin account. I reinstalled Firefox, disc repaired permissions and so on, but nothing helped. For the second account .plist file could be damaged? I can't remove it because of permissions so cannot test this. Please notify.

  Try to repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html
  • http://guides.MacRumors.com/Repairing_Permissions

• The RAW files on the SD card "appear to be damaged or not supported" but JPEG work very well.

  When I use my Rebel T3 SD card, jpegs load very well but lightroom 2.7 will not load the raw on a SD card files. Anyone else having a problem with that?

  Devices supported by Adobe Camera Raw

  The Canon Revel T3 was initially supported by Lightroom 3.4.1.

  You will never be able to open this camera Raw files in Lightroom 2.7.

  If you do not upgrade then you must download the free Adobe DNG converter, convert all the Raw files to DNG and then edit DNG files in Lightroom 2.7.

  Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC

  Camera Raw: How to use Adobe DNG Converter - YouTube

• Problem with a digital output in the information of an analog input

  Hello

  I use a SCXI-1000DC module with a module of the SCXI-1600, SCXI-1531 module and SCXI-1163 module to receive an analog of an accelerometer signal and a digital signal.
  I claim that the accelerometer is constantly monitored, and the output is on when I want to, by an impulse that I comand in labview.
  I use a rate 25 k and a 12, 5K samples per channel on DAQmx Timing.

  I notice in DAQmx read, if I put a sample of hight by channel, the output is not there when I want to, and if I put a few samples per channel, I exit when I want to, but the program seems to be slow with the passage of time. I don't know how I can solve this problem!

  I'm sorry for my English, and I hope you can help me.

  Thank you

  Silvia

  Hello Silvia,.

  If you ask a larger number of samples, the labview diagram will stay longer in the DAQmx Read function, so the while loop runs slowly, and the digital output is updated less often.

  I suggest that you use 2 separate while loops: one for the analog input and the other for digital output, so that each loop might run at a different speed.

  Best regards

• Try to connect to my yahoo on Safari takes me in a continuous loop to the login page. It works very well with Firefix.

  Try to connect to my Yahoo on Safari brings back me in a continuous loop to the login page. My registration using Firefox works fine.

  IM using ios10 on an iPhone 6 s

• MLB Gameday page is cut all the way around. It works very well on Internet Explorer. What's wrong?

  When I access the page to the game, all the content of the page is not displayed. The boxscores are cut at each end and the top and bottom. On IE, the content is allowed to be placed on all of the space on the page and works perfectly.

  One possibility is a problem in the Firefox page zoom feature.

  To restore the default zoom level, click in the margin of the page (black box, outside the Flash content) and press Ctrl + 0 (that's a zero).

  Another possibility is obsolete files in the cache. Try to reload the page with Ctrl + Shift + r to work around old updated files cached.

  Is it a help?

• Google product-i/google, gmail, etc. does not load on firefox, but they work very well on Chrome - that happened during the night - is taking control of google or hacker?

  I / google was my home page - one morning I opened FF and place comes TEXT - as a default text with html went. Do not remember if I had downloaded Chrome before or after that. I also tried YouTube and could not get my upcoming account. I created a new account gmail on Chrome and tried to access on FF and the loading screen came but FF could not load - expired - but the loading bar had no activity. In any case, I guess I'm not smart enough to understand. Someone else has reported this 'cover of google. I am a loyal fan of FF.

  Perform the suggestions mentioned in the last three articles provided in my previous answer.

• OBIEE 11.1.1.7.1 Cluster - unable to deploy the RPD on Node1 (node2 works very well)

  Hello

  We found a problem after the upgrade of our Cluster OBIEE of 11.1.1.5 to 11.1.1.7.1. The system works as expected and all operational services. However, we discovered a problem with the Fusion Middleware control.

  When you deploy a new version of the RPD file, the system copies the RPD to:

  -Ocfs folder shared (for example: < Filename > 0028.rpd.000001) as expected

  (- Node2 RPD file < OBI_INSTANCE > / bifoundation/OracleBIServerComponent/coreapplication_obis1/repository) as expected

  2 problems that happened during the deployment process:

  (- It has NOT copied in the folder of prd Node1 < OBI_INSTANCE > / bifoundation/OracleBIServerComponent/coreapplication_obis1/deposit)

  -In addition, it has not changed on the NQSConfig.INI with the new version of the RPD (Star = PROD_BI0027.rpd, default value);.

  As a result, the RPD on Node1 is out of sync. Only Node2 integrates the latest version of the RPD. Everything worked fine before the upgrade process.

  We have seem some newspapers being generated on the BI system when this problem happened. We upload files to this SR for your appreciation. Some errors are related to the:

  # < 18 August 2013 22:09:26: 00 CDT > < error > < oracle.webservices.service > < agpbiapp01.xxxxxxx.com > < bi_server1 > < ExecuteThread [ASSET]: '27' for queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 64365635af5ea016:-3978bbb1:1408c3aec13:-8000 - 00000000000697 has 7 > < 1376881766030 > < OWS-04086 > < oracle.webservices.provider.ProviderException: javax.xml.ws.WebServiceException: BI Security Service Access Denied - credentials provided in the SOAP Message header authentication failed.

  Other errors:

  Message ID	OWS-04086
  Message level	1
  Relationship ID	0:1:1:6:1
  Component	bi_server2
  Module	Oracle.WebServices.service
  Host	agpbiapp02.xxxxxxxx.com
  IP address of the host	10.10.10.191
  User	< anonymous >
  Thread ID	[ACTIVE]. ExecuteThread: '17' for queue: "weblogic.kernel.Default (self-adjusting).
  ECID	64365635af5ea016:-3978bbb1:1408c3aec13:-8000-00000000000ce78f
  Message	oracle.webservices.provider.ProviderException: javax.xml.ws.WebServiceException: BI Security Service Access Denied - credentials provided in the header of SOAP Message authentication failure
  Additional detail	at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:492)

  at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)

  at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1123)

  at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)

  at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:235)

  at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:195)

  at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:487)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Caused by: javax.xml.ws.WebServiceException: BI Security Service Access Denied - credentials provided in the header of SOAP Message authentication failure

  at oracle.bi.security.handler.ServiceAuthorizationHandler.checkCredentialsHeader(ServiceAuthorizationHandler.java:227)

  at oracle.bi.security.handler.ServiceAuthorizationHandler.handleMessage(ServiceAuthorizationHandler.java:149)

  at oracle.bi.security.handler.ServiceAuthorizationHandler.handleMessage(ServiceAuthorizationHandler.java:63)

  at oracle.j2ee.ws.common.handlers.HandlerChainInvoker.callProtocolHandlers(HandlerChainInvoker.java:772)

  at oracle.j2ee.ws.common.handlers.HandlerChainInvoker.internalCallHandlers(HandlerChainInvoker.java:479)

  at oracle.j2ee.ws.common.handlers.HandlerChainInvoker.callHandlers(HandlerChainInvoker.java:404)

  at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:182)

  at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:477)

  ... more than 40

  It seems that there is a zero references used by Web services on Weblogic when you deploy changes to the RPD.

  How can we reset the store of credentials or passwords used by Web services above?

  Thank you

  
  

  Danilo

  The problem has been resolved by following the steps in this document:

  OBIEE 11 g: error: 'MANAGED_SERVER:bi_server2; FAILED_CONTACTING_MANAGED_SERVERS; Specified BI Managed Servers are closed: bi_server2 'deployment of repository in Enterprise Manager (Doc ID 1468049.1).

• I have created a script for the activation of show and print option in the text condtional. It works very well in most of the chapter, but it does not activate some chapter. Please advise for that matter

  Please see the below script

  myEventListener = app.eventListeners.add ("afterOpen", placeFilesOnDoubleClick, false) var;

  myEventListener var = app.eventListeners.add ("AfterClose (AprèsFermeture)", placeFilesOnDoubleClick1, false);

  function placeFilesOnDoubleClick()

  {

  app.conditionalTextPreferences.showConditionIndicators = ConditionIndicatorMode.SHOW_AND_PRINT_INDICATORS;

  }

  Hello

  Set this property to app relates to a new doc created from that moment.

  Set this property instead of the app activeDocument.

  app.activeDocument.conditionalTextPreferences.showConditionIndicators = ConditionIndicatorMode.SHOW_AND_PRINT_INDICATORS;
  

  Be awared that afterOpen is triggered two times: after opening a doc and after opening a window for this doc.

  However in your case he just defined same property twice, so is not serious

  Jarek

• Projector not recognized by Windows when it is connected to the DVI port

  I have a projector with a HDMI input. I ran a cable my video card from the pc Windows Vista from the exit to the my projector DVI HDMI input. Windows does not recognize what it and the projector wont recognize that there is a signal output on DVI-d port. I plugged my regular LCD monitor in the local port, and it works very well. The problem is that for my regular LCD monitor, I want to use the RGB and DVI connection for my projector. Can anyone help?

  Hi Mauriceyo,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, you have problems connecting the projector on Windows 7 computer. We're here to help and guide you in the right direction.

  I suggest to download and install the latest drivers from the chipset manufacturer's Web site and install it on the computer:
  Update driver that does not work properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Try the following steps:

  (a) open the window customization by right click on the blank desktop and choose "Customize".

  (b) in the to do list click the link "to connect to a projector or other external display.

  (c) the Windows Mobility Center displays, presentation settings box click the Activate button to turn on the projector

  (d) now your screen will be displayed on the projection screen on the big screen as well as your own computer screen

  (e) If you want to change the presentation options click the icon projector inside the box of presentation settings

  (f) the presentation settings Windows appears, if you have turned on the projector, that 'that I am currently giving a presentation' is checked

  (g) when you're giving a presentation your computer stay awake and notification system are turned off by default, the screen saver is disabled

  (h) you can also adjust the volume of system to show different wallpapera in that you usually use, then the presentation ends and you turn off the projector returns regular your wallpapers

  (i) If you are not sure what are connected click on the button "Connected displays...". "on the bottom of the existing window

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?