Black film Maker screen with videos

Similar Questions

• Black Pavilion a305w screen with cursor flashing at the beginning upward

  When the computer starts, starts the hp screen then black screen with cursor flashing/dash appears in the left corner. When a key is pressed, it beeps only nothing happening even when the f keys are pushed.

  I tried to disconnect the optical drive still same thing blincking momentum in the left corner only. Thanks for your help, what would you suggest then.

• Black Windows 7 screen with mobile cursor

  All of a sudden my computer running windows 7 no longer works and a black screen with a mobile cursor. I have tried everything to restore, mode low resolution, hypersensitive unveiled at the factory to reset the computer and it took a dump on me and gave me the black screen, HELP!

  Hello

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  As described in the question, you get a blue/black screen with cursor mobile while restarting the computer. This type of error occurs usually when a serious problem causes Windows 7 to stop or restart unexpectedly. There are several reasons why this type of error occurs on the computer. In this case, the problem could be due to the damaged or corrupted system files on the computer.

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  Step 1:

  Disconnect all external devices connected to your computer except for the mouse and keyboard and check if it helps.

  Step 2:

  Check the issue in disable automatic system error reboot and if you get an error message.

  See the link below on the instructions for disable automatic reboot on system failure:
  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Method 2

  I would suggest trying the following methods and check if it works for you.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note:

  I strongly recommend to back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  Warning for system restore:

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: Ignore step Reinstall Windows 7 from the link above.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Black Windows 8 screen with mouse crusor

  Hi I just got a new tower with windows 8

  and I installed my nvidia pny 9800 gt graphics card, then I went to nvidia site to download a 320 driver version. something something
  then I installed and then after that I liquidated down, then I started again and all it shows a black screen with my mouse crusor

  Hello thanks for the options, but I managed to figure out the problem

  you know the power of the fan switch I had to turn the pc by doing this, then open it again then it will display the screen that it no longer im happy but thank you very much for the only person who responded, :), Bravo to you

• Cannot get full screen with videos uTube

  I bought a Mac mini-opportunity 2.1 mid-2007, 1.83 GB and 2 GB of ram.  OS 10.6.8 using Safari I can watch videos, but when I click on full screen, I get a message stating that the browser does not support.  I am using a VGA monitor.    On my iMac desktop computer when that was under snow leopard, I don't remember the problems with the mode full-screen.  So I wonder, is there an add-on I need?

  Hello, Charles Palenz,.

  Thank you for using communities of Apple Support.

  I understand that you get an "unsupported browser" message when you try to view videos full screen YouTube on your Mac mini. I know how it is important to ensure that you can view videos how you want your Mac.

  I recommend you take a look on the support site of the mode full-screen YouTube, specifically the steps listed to ensure that you have a version update of Adobe Flash Player installed. Then, follow these steps:

  1. Open Safari.
  2. Select "Safari" from the Apple menu bar in the upper left corner of your screen and select Preferences from the menu drop down.
  3. Select the Security tab and put a check mark in the box next to "Internet plug-ins: Plug-ins to allow", if it is not already selected.

  If you still have a question after that, please contact the Support of YouTube directly.

  Best regards.

• Green screen with video call

  I had an update today on my version of the Skype android tablet. Before the update, I have not had any problems to make video calls. Now the other user can hear me, but only sees a green screen. I made sure I'm on the right camera and everything. On my Tablet I see the view of my camera, all right, but not the other end of my call.

  Help.

  It is a problem of manufacturer: eg inear July 1, HTC has done the update of 3.32... to 3.33... for some countries but not in others, such as in the Canada. Heck, call HTC Canada and they go "Huh?" Call them and tell them you want the problem solved: free the 3.33.401.6 (Sensation)/3.33.401.106 Sensation XE to the rest of us. HTC Canada is 1-866-449-8358.

• Amazing slider with video in Adobe Muse inside

  Hello world.

  Did someone knows, is it possible to create such a cursor in the Muse full screen with video playback inside? Like here:

  Jupiter - Preview theme sensitive multi-purpose - ThemeForest

  Ahh, this one. I see...

  The beauty of this combination, that the slider (1) starts with a full height and width slider, (2) switches to just a (full-width) the size of the item to scroll and (3) also supports the video to use as content.

  As by chance, someone else on this forum recently came with a sort very similar examples: Nevis Marine and generation media Africa Odyssey, all showing the same combination. Read the discussion for clues how to operate in Muse.

• YouTube does not play videos in google chrome, I see only black white screen with nothing happening.

  * Original title: youtube

  Hello

  YouTube is not playing videos in google chrome, I see only black white screen with nothing happens

  YouTube works fine under IE

  WATS the problem please say n give solution

  This problem has something to do with Dell Data Vault?

  because after I turn on my machine, I get this message... Service Dell Data Vault has stopped working

  details on dell Vault problem... reference data below

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DellDataVault.exe
  Application version: 3.9.3.0
  Application timestamp: 54cc0788
  Fault Module name: DellDataVault.exe
  Fault Module Version: 3.9.3.0
  Timestamp of Module error: 54cc0788
  Exception code: c0000005
  Exception offset: 00017126
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 16393
  Additional information 1: a539
  More information 2: 18736dd72b4a3074605a116ef5884f1f
  3 more information: c832
  Additional information 4: 3c436c3937586374ee122b3cd7b3def9

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  PLEASE HELP SOON

  Given that this problem affects Google Chrome, I ask in the forums of Google Chrome: Google Chrome help Forum

• Unable to use Movie Maker 2.1 to make my own video compilations of my videos converted families (converted with USB 2.0 TV BOX - InterVideo WinDVR).

  I use a USB 2.0 TV BOX (its software is "InterVideo WinDVR") to activate my old family videos VHS and DVR (VCR/DVD via RCA cables drive) of video files.

  The files are anywhere from 4 or 5 MB .5MB (mainly), with one or two files like 7MB, depending on the family event.

  Once I created the new video files, I have no problem to watch with Windows Media Player (and they look beautiful, as there was almost no loss of photo quality and or sound in the transfer at all - very very nice).

  Then I will import the video clips/files newly created in Movie Maker (I have Movie Makers version 2.1). in order to make new compilations video, eager to add effects and transitions and music in Movie Maker.

  The newly created files seem to import no problem... but when I try to preview... the sound plays very well but there is no video... only in black on the preview screen (the few times I tried this I had to close Movie Maker).

  I tried moving them dirrectly to the timeline and then see them and play a clip, but then when I clicked the back button to replay the same thing above occurs, black in the preview with sound window.

  I did some reading online to try to understand, and...

  I tried to import the file/clip directly on the timeline and then finishing/recording on my computer and then importing the wma file that results, but the same thing, black with sound.

  What am I what am I doing wrong or what do I need get this working... grandmas are starting to nag... lol

  Thanks a lot for any help or advice anyone can offer me, time and review.

  Dagtall

  Once again...

  I use USB 2.0 TV BOX to convert my analog video to digital, it's a software is InterVideo WinDVR, using the automatic setting 'Best' for "Record quality", which says that the files are converted to...

  Cut paste &:

  Format: MPEG-2
   
  Audio:
  Format: MPEG-1 Layer II
  Sampling frequency: 44.1 kHz 16-bit stereo
  Bitrate: 224 Kbps
   
  Video:
  Size: 720 x 480
  Frame rate: 29.97 FPS
  Bit rate: 7200 Kbps
   
  Total:
  Bitrate: 7715 Kbps
  File split size: 4063 MB.
  Total record time: 2257 minutes

  I am runing Windows XP Home Edition version 2002 service pack 3, with a Pentium 4 CPU 3.20 GHz, 2 GB Ram. My video card is an e-GeForce 9600 GT superclocked edition DX10 ready 512DDR3 PCI-E.

  I use a USB 2.0 TV BOX (its software is "InterVideo WinDVR") to activate my old family videos VHS and DVR (VCR/DVD via RCA cables drive) of video files.

  The files are anywhere from 4 or 5 MB .5MB (mainly), with one or two files like 7MB, depending on the family event.

  Once I created the new video files, I have no problem to watch with Windows Media Player (and they look beautiful, as there was almost no loss of photo quality and or sound in the transfer at all - very very nice).

  Then I will import the video clips/files newly created in Movie Maker (I have Movie Makers version 2.1). in order to make new compilations video, eager to add effects and transitions and music in Movie Maker.

  The newly created files seem to import no problem... but when I try to preview... the sound plays very well but there is no video... only in black on the preview screen (the few times I tried this I had to close Movie Maker).

  I tried moving them dirrectly to the timeline and then see them and play a clip, but then when I clicked the back button to replay the same thing above occurs, black in the preview with sound window.

  I did some reading online to try to understand, and...

  I tried to import the file/clip directly on the timeline and then finishing/recording on my computer and then importing the wma file that results, but the same thing, black with sound.

  What am I what am I doing wrong or what do I need get this working... grandmas are starting to nag... lol

  Thanks a lot for any help or advice anyone can offer me, time and review.

  Dagtall

  Once again...

  I use USB 2.0 TV BOX to convert my analog video to digital, it's a software is InterVideo WinDVR, using the automatic setting 'Best' for "Record quality", which says that the files are converted to...

  Cut paste &:

  Format: MPEG-2
   
  Audio:
  Format: MPEG-1 Layer II
  Sampling frequency: 44.1 kHz 16-bit stereo
  Bitrate: 224 Kbps
   
  Video:
  Size: 720 x 480
  Frame rate: 29.97 FPS
  Bit rate: 7200 Kbps
   
  Total:
  Bitrate: 7715 Kbps
  File split size: 4063 MB.
  Total record time: 2257 minutes

  I am runing Windows XP Home Edition version 2002 service pack 3, with a Pentium 4 CPU 3.20 GHz, 2 GB Ram. My video card is an e-GeForce 9600 GT superclocked edition DX10 ready 512DDR3 PCI-E.

  ====================================
  You have file compatibility issues.

  Try to use the following free software to convert files
  for the .wmv format and then import into Movie Maker.

  Format Factory
  http://www.pcfreetime.com/

  John Inzer - MS - MVP - digital media experience

• Windows Vista starts with only a black screen with the mouse pointer.

  Saturday, 02/27/10, I left my laptop (Dell Inspiron 1405 E) because I used Studio to produce a couple of videos.  When I got up in the morning, he himself had closed.  I tried to put on normally, and he said: recovery error windows, then on lists: Launch Startup Repair tool and start windows normally.  I tried to do a repair, but it just comes back to the same screen.  When I try to boot normally, it shows the progress on the background as usual bar, but then he comes up to a black screen with a mouse pointer.  When I run one of the many diagnostic tests, it is said that the BIOS cannot find the operating system loader.  I'm pretty adept at computers, but nothing I've tried before reinstalling Vista works.  I have files that I need to keep it on the computer, and only a few of them are saved.  Please help me soon, as I need for my school musical production on Thursday.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system
  Restoration, it must only be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation which should save the data but you will be
  Maybe reinstall programs. It also requires the correct Vista disks especially for OEM
  versions. You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help, please! black screen with blinking cursor...

  my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disk, then there a blue screen that says it was shut down to avoid damage and that a crucial thread in the system operation is released or terminated and to check the hardware or software that can be installed properly, then he did a crashdump and completed it. then he went to a black screen with a cursor of Charlotte on top and that's all he does now when I turn on the right after Gateway logo, he goes to this black screen with blinking cursor. What anddo which has happened, I hope or is this a lost cause? Help, please!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• Impossible to load windows, just get a black screen with cursor

  I restarted my computer and now Windows will not load. It happens on the screen says 'Windows' in the bottom with green bars. Then it goes to a blank screen with a cursor to work. I left alone for a bit to see if she would just take a while to load and the screen saver came, that works, but I cannot get it on my desk.

  -nothing has been installed recently

  -Tried to reboot in safe mode (cannot enter safe mode)

  -Tried to restore to previous points

  -Tried CTRL + ALT + DELETE (does nothing, can't pull up the Task Manager)

  Hello

  A blackscreen can be very hard to fix. It's my generic convenience store which some you already have
  has tried.

  One to try:

  "C:\Windows\System32\winevt" in this folder is an another NEWSPAPER named one

  Rename the folder of NEWSPAPER LOGSold and restart the computer.

  'C:\Windows\System32\winevt\Logs'-> 'C:\Windows\System32\winevt\Logsold '.

  REN C:\Windows\System32\winevt\Logs C:\Windows\System32\winevt\Logsold

  You can try in a Command Prompt of a disk of Vista or a recovery Partition if you can't navigate to
  the actual winevt file.

  -----------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows starts, but does not charge not (black screen with cursor)

  [Sorry for the long post, but I feel the need to explain my situation]

  I have the following problem:

  I turn on my PC, and Windows shows it is normal loading screen, then it goes in a completely black screen, with just the mouse in the middle. By the size of the cursor, I can say that it is in a low resolution, probably 800 x 600 (compared to my usual 1920 x 1080). I am able to movements of the mouse, but with no particular purpose without something to click on. No other keyboard input seems to work, except for press SHIFT 5 times, which shows the keys dialog box to self-retaining (with just 'yes' or 'No' options, no other connection); and Windows key + U, which shows the ease of access Center. CTR + Alt + Del does NOT work.

  So far, that's what I tried (in chronological order):

  1. Start in Safe Mode, Safe Mode with network, safe mode with command prompt Mode, start low resolution video, last known good configuration: all give the same result as to start normally.
  2. Repair of your computer:
     1. Startup Repair: find the registry errors (I realized and fixed this more later on)
     2. System Restore: did not find any previous restore points (I know with certainty that there is, I took the habit of making regular restore points).
     3. Windows memory diagnostic: not found error.
     4. Command prompt:
        1. Ran the command chkdsk /f r, has no error report.
        2. Ran sfc/scannow: I don't remember the exact report, but he asked to restart the computer to complete the repair of the problems. I rebooted and ran the new order for the same result.
        3. Forced the scan with: sfc/scannow damaged = c: \ /offwindir = c:\windows, concluded and repair errors, not always not load windows.
  3. Ran Dell Diagnostics start, found no errors.
  4. Startup Repair ran found once again the registry errors. I found the solution to this in a forum for Microsoft Help ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ) and fixed the problem. I rebooted, but the problem persists.
  5. Startup Repair does not detect now no error. I tried restoring the system again, we find 2 restore points dated AFTER the beginning of my problem. I decided to restore it in any case, but none of them worked.
  6. I ran Windows Defender in offline mode:
     1. Quick scan: and found 2 threats and remove.
     2. Full system scan: found 4 more threats, removed 2 of them, the other two could not be removed because they were in an ISO file.
  7. I've tried steps 1, 2 and 3 with no luck.

  With every step, I am aware that I am closer to having to reinstall Windows, then I decided to see if I could still access my HD to save my personal files. I did a live Linux CD (with Ubuntu), but I have a problem of mounting the readers, because they are in a RAID0 configuration. "sudo dmraid s" gives the following error: "ERROR: Sie: number of devices in RAID wrong value"isw_dbdffjficc_ARRAY0"[1/2] on/dev/sdb.

  Important details:

  I changed my graphics about 4 months ago (a 750ti of Nvidia GTX for an ATI Radeon HD 6450), and told me that I can run short with the power supply. The new card requires a minimum of 450W, and I think that my diet is 460W. This may or may not have something to do with this question, I have no idea.

  My 2 hard drives of 500 GB RAID0 configuration has brought me a lot of problems of the day 1. One of the HARD drive would be randomly (I am able to hear a clicking sound different when this happens) failure and the computer would break. At the start, he would ask a boot device. The Dell boot utility would then recognize only 1 readers, but would end without errors. After a reboot or two, everything would be fine and would be boot windows normally (apart from the usual error recovery screen) with no sign of corrupted data or anything. As I said, it happened are the arrival of my PC, but restarting a couple of times still attached. From now on, the two HD seems to work very well, the Dell utility recognizes two of them and found no errors in one of them, and I can access any directory from the command prompt.

  Is there anything else I should try before reinstalling Windows?

  Before the installation, I really wish I could recover my files (I have important documents of the College), is it possible to do this?

  Sorry again for the very long post (and for any errors of language, English is not my native language) and thanks in advance.

  Since you have not yet had your data readers. I recommend a Windows installation without formatting the drive... I don't like this solution, but at this point, you have probably tried everything.

  Use a reinstallation of Windows 7 installation DVD, make sure that you select...

  Select custom: Install Windows only (Advanced)

  

  If you do not select one of the route options and everything simply highlight the largest partition and click Next:

  

  Windows will dump all the old Setup files into the Windows.old folder

  

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Black screen with cursor when connecting Windows 7. Reinstall the drivers doesn't help not.

  I have a Windows 7 Pro machine that boots to a black screen with a cursor instead of the login prompt, but if I press some keys like enter and tab that I will get a few blue squares where probably windows are appearing.

  I can boot into safe mode and log in. I can then disable or uninstall the video card and the boot into normal windows. But if I install the Intel to the HD3000 integrated video drivers, the black screen will be there waiting for me when I reboot.

  I tried with and without external monitors connected.

  I tried to uninstall the drivers in the menu programs and features (also selection to completely remove the drivers), and I uninstalled them through Device Manager. I then reboot before installing the Intel drivers again. I tried the version on the site Web of Panasonic, as well as the latest version of the Intel Web site. Results have been the same every time.

  Are there left behind somewhere that I could try to remove registry keys? Perhaps a more thorough removal method? Something more creative? All ideas welcome!

  System Specs:

  Panasonic Toughbook CF53 (A)

  Windows 7 Pro 32 bit

  Intel CPU 2520 M w / HD 3000 integrated video

  4 GB OF RAM

  This system has been restored to a standard corporate image, unfortunately is no longer near factory that she'll get. System Restore will not be an option because he has never been in a working state. Startup Repair was not an option due to disk full corporate encryption that seems to make the unreadable disk at this time here. I tried but it fails and I can't find the drivers to be used in the environment of recovery for this BeCrypt Disk Encryption.

  Hi Brian,.

  According to the information that you, as you can start your computer in safe mode without problem, then the problem is probably with the supplied driver. Since the installation of the driver is causing the problem to occur, one possible cause is a driver you want to install is not compatible with the system. We suggest that you contact the manufacturer of your computer for help on installing the correct driver for your PC.

  Kind regards.