Black Friday student - how update the apps - CC Version offers only the trial version

Similar Questions

• Satellite P750 (PSAY1A) - How update the recovery partition?

  Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  My Toshiba Satellite P750 (PSAY1A-01Y022) the factory settings has 132 update of Windows that should be applied during the first pass. I had to run Windows update 4 times before she shows "up-to-date". Not to mention drivers Toshiba as well.

  I also want to include some applications (Microsoft Office and other software and utilities)...
  Overall, I spent 2 days just to bring it t the State I want in.
  But I can't just access the recovery Partition (of the less any of this!)

  If you look at disk management, the recovery Partition is not a Volume name and that the file system is empty. If I right click on the recovery partition... all I see is "Help" Option

  I tried to assign a drive by using Diskpart letter... but it doesn't show much.
  My guess is that it is GBT/EUFI.

  Does anyone have experience updating the recovery Partition?

  > Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  What do you mean by update recovery partition?
  The recovery partition should NOT be touched!

  In which case you'd change the partition, the HARD drive recovery process could not be started!

  Probably, you have not understood the meaning of such a HARD drive recovery procedure.
  It's the option provided by Toshiba and the recovery of HARD drive allows you to establish the notebook to factory settings; on the same State as at the first day of the purchase.

• Satellite A40: How update the BIOS because I only have half of the Bios

  Hi guys

  I went to the local with my satellite A40 computer store because I only have half of the bios!
  I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.

  Why not? What are the risks in need to know.

  Please help me because I want to in the future might be upgraded to vista?

  Hello Daniel,.

  I'm a little confused about your message from Mr.
  What do you mean with half of the bios is enough?
  What s wrong with the BIOS?

  The support from Toshiba said-> try a BIOS update.
  On the Toshiba page, you can download the BIOS for Satellite A40.

  It seems you didn't check the download page detailed because on this page you will find this statement:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.

  Good bye

• How update the graphics drivers that i didn't install the card myself?

  Map of the laptop I had installed myself,

  So, how then update the graphics drivers?

  Thank you

  Hello

  As graphics hardware is already installed on your laptop, go to the website of the manufacturer of your laptop > drivers download Section > then key in your number cell phone model > find your operating system (Windows 7 32-bit or 64-bit) > finds two recent graphics / video or the drivers of the Chipset (depending on how it is formulated) and download and install.

  See you soon.

• How update the calendar in the mapping of period FDMEE source

  Hello

  We are looking to update the calendar in the mapping of period FDMEE source.

  I have attached the screenshot. Once I chose the MD (jan - Dec), the year GL calendar details up to 2014 is coimg upward where 2015 is still missing.

  We would like to know how to add details to the year 2015... where this timetable is maintained.

  Our source is Peoplesoft General Ledger and target is "ARM."

  Please notify.

  Thank you

  Rigot

  I assume that the timetable is kept in TFTP so if 2015 has been another year added you initialize again your source system.

  Have you already tried?

  Concerning

• ScriptUI: How update the values from Listbox? (CC2014)

  Is there a way to update item listbox that filled with the elements of the array JS. If I push more items in the table, how do I re - make in ScriptUI? Is there any way to do this.

  I know there are average just to add items to the listbox as in PDF of Peter Kahrel. But it's not so dynamic:

  var w = new Window ("dialog");
  var myList = w.add ("listbox", undefined, ["one", "two", "three"]);
  var b = w.add ("button", undefined, "Add");
  b.onClick = function () {myList.add ("item", "zero", 0)}
  w.show ();
  

  What would you say if I wan't to update the listbox when I changed my paintings, as below:

  // Create example array
  var testArr = ['item1', 'item2']
  $.writeln(testArr.length);
  
  startGUI();
  function startGUI() {
      
      // Window
      var win = new Window( "palette", script_name, undefined, { resizeable:true } );
      win.orientation = "column";
      win.alignChildren = ["fill", "fill"];
      
      // Listbox
      var myListbox = win.add ("listbox", undefined, testArr,  
          {  
          numberOfColumns: 1,  
          showHeaders: true,  
          columnTitles: ['Name']
      });
  
      // Add Item To Array
      var addItem = win.add("button", undefined, "Add Item");
      addItem.onClick = function() {   
          testArr.push ('item3');
          $.writeln(testArr.length);
      }  
  
      // Quit BTN
      win.quitBtn = win.add("button", undefined, "Close");
      win.quitBtn.onClick = function() {   
          win.close();   
      }
  
      win.show();
  }
  

  There may be some update on ScriptUI funtion. I tried to look for the solution without success. Any help?

  I've updated your own script to show how I removed the listbox

  I added a group to host the listbox control, the purpose of the group is to be used as a placeholder (to add the new listbox to the right place) and easily get the listbox to delete

  // listboxEditFromJSArray.jsx - Sakari Niittymaa
  // https://forums.adobe.com/message/6785515 
  
  //#target illustrator 
  
  // Create example array
  var testArr = ['item1', 'item2', 'item3']; 
  
  startGUI();
  function startGUI() { 
  
      // Main Window
      var win = new Window( "palette", "Test Listbox", undefined, { resizeable:true } );
      win.orientation = "column";
      win.alignChildren = ["fill", "fill"]; 
  
      // Listbox Group
      var grpListbox = win.add('group');
      grpListbox.alignChildren = ['fill', 'fill'];
  
      var myListbox = addListBox (grpListbox, testArr); 
  
      // add ListBox
    function addListBox(container, testArr) {
          var listbox = container.add("listbox", undefined, testArr,
              {
              numberOfColumns: 1,
              showHeaders: true,
              columnTitles: ['Name']
          });
  
          return listbox;
    }
  
      // BTN: Add Items To Array
      var addItem = win.add("button", undefined, "Add Item");
      addItem.onClick = function() {
          testArr.push ('item' + (testArr.length + 1));
          grpListbox.remove(grpListbox.children[0]);
          myListbox = addListBox (grpListbox, testArr);
          win.layout.layout(true);
          //updateListboxArray(myListbox);
          //$.writeln (testArr.length + "  " + myListbox.items.length);
      } 
  
      // BTN: Remove Selected
      var removeSelectedItems = win.add("button", undefined, "Remove Selected");
      removeSelectedItems.onClick = function() {
          // Remove selected listbox item from array
          testArr.splice( myListbox.selection.index, 1 );
          updateListboxArray(myListbox);
      } 
  
      // BTN: Clear Listbox
      var removeAllItems = win.add("button", undefined, "Clear Listbox");
      removeAllItems.onClick = function() {
          // Clear the array
          testArr = [];
          updateListboxArray(myListbox);
      } 
  
      // Update listbox items
      function updateListboxArray(listbox) { 
  
          // Clear listbox first
          listbox.removeAll(); 
  
          // Create new listbox items from array
          var i = 0;
          while (listbox.items.length < testArr.length) {
              listbox.add ("item", testArr[i]);
              i++;
          }
      } 
  
      // Quit BTN
      win.quitBtn = win.add("button", undefined, "Close");
      win.quitBtn.onClick = function() {
          win.close();
      } 
  
      // Window Settings
      win.onResizing = function () { this.layout.resize(); };
      win.onShow = function () { win.layout.resize(); };
      win.center();
      win.show();
  }
  

• How update the vmware tools on the guest or virtualcenter

  Hello

  We run a store where we support some linux boxes.  We had some problems with time drift and other things and on our vmware guy suggested put us the version of VMWare tools on the guest or virtual Center.  The only problem is that I can't find a procedure for this.

  To clarify, I'm not how to install VMWare tools on virtual machines.  We know how to do and we know to recompile after we patch the kernel.  But our guys VMWare suggests that in the end we're just recompile the same old version of VMWare tools to make it work with the new kernel.

  In fact, we suspect the version we have is very old, that we have not successfully updated because we were running on 2.5 and are now running on 4.0 Update 1 (wait for the 4.1 support nexus is added).

  Thank you

  Dan

  Welcome to the forums!

  So I assume you mean updating the source VMware Tools, which is then used to update VMware tools in guests?

  The guy from VMware is true, recompile the tools is necessary after a kernel update has been done. It is not up-to-date version. However, you must do that to make them work again.

  The latest VMware tools comes with the latest product or updates/patches for this product. Information shows that the tools are not updated after you apply this hotfix or an update.

  They also can be downloaded here (for ESX 4.x) : http://www.vmware.com/patch/s3portal.portal?_nfpb=true&_windowLabel=SearchPatch&SearchPatch_actionOverride=%2Fportlets%2Fpatchupdate%2FdisplayAllBundlePatches&_pageLabel=s3portal_pages_downloadPatch_page

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How update the name and the date of last update its?

  Hello
  
  In a data entry form, I have Undated_On and Updated_By fields.
  I put & APP_USER. and to_char(sysdate,'DD-MON-RR') than their default values.
  When the saved data are changed, I want the name and date of update the last updated person.
  But even if I update with different user login ID, only the default values are displayed.
  How can I change the name and the date of last update its?
  
  Thank you
  Guy
  
  -----
  H5. FYI, I am very new to SQL, PL/SQL, and APEX. Would appreciate much more explanation and full path (for example. Shared components > change the security attributes > VPD)

  Hi guy,

  I have a form based on the employees table. If someone makes any changes on the form, it will update the user_id and last_updated columns in the table. I use the trigger on the table to update these columns:

  CREATE OR REPLACE TRIGGER biud_employees
  FRONT
  INSERT OR UPDATE
  ON employees
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  Start
  : new.user_id: = nvl (v ('APP_USER'), user);
  : new.last_updated: = sysdate;
  end;
  /

  It will be useful.
  Thank you
  Zahid

• BlackBerry 10 how update the OS using the Mobile network?

  Hello... I recently bought the Z3 that came with OS version 10.2.1.3412 and SR 10.2.1.3054.
  Now the device demonstrates that this new update is available which is SR 10.3.2.2474.
  I don't have a Wi - Fi connection, I also tried updating via BlackBerry Link and on the Web, each time it displays an error.
  Is it possible to update the operating system on the Mobile network?
  Please give your suggestions.
  Thank you.

  Possibly, if you have a plan hotspot on the account on the sim card.

• How update the values in ValueChangeEvent...

  Hello world

  I use Jdeveloper 11.1.2.0.0.

  I have a scenario as follows. I have 2 fields like password and Confirmpassword.

  I wrote a ValueChangeListener for the password field to make some validations and I wrote an other ValueChangeListener for the field Confirmpassword inorder to compare values entered in the two fields.

  But here..., event in ValueChangeListener field Confirmpassword, iam cannot retrieve the password field value to compare.

  
  

  The reason is... ValueChangeListener is located in ApplyRequestPhase/ProcessValidationsPhase and updated the values in UpdateModelPhase values are so not updated and impossible to get in the ValueChangeListener event.

  
  

  In order to update the values of the tree of components in case of ValueChangeListener, I tried to use code below

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  
  

  But the values are not updated... Please suggest me to complete my scenario. Do what is necessary. Thanks in advance.

  
  

  Concerning

  Leprince
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hello

  Change the scope of the bean to viewScope.

  Kind regards

• How update the column in the table based on the value selected in apex4.1

  Hi all
  I have the following tables,

  leave_type table,it has the following fields,
  1.emp_name,
  2.sick
  3.casual

  and it has the values as follows,

  emp_name                  sick             casual
  guru                           10                10
  mishra                         10                10

  leave_master table and it includes the following fields

  1.emp_name,
  2.leave_type
  3.no_of_days

  I have the form based on the table "leave_master"
  Here, the leave_type has the LOV which includes.
  sick and casual.
  
  When the form is filled out and clicked on the button submit,
  I need to update the column leave_type in table leave_type,
  for example,.

  if 
  emp_name:guru
  leave_type:sick
  no_of_days:3

  then I want to update the leave_type column,
  sick sick = - no_of_days for the 'guru' of name
  That is to say, ill = 10-3 = 7
  
  then the leave_type of the table must be,

  emp_name                       sick             casual
  guru                                 7                10
  mishra                              10               10

  someone can such me what code or method I can use?
  Thank you.
  
  Published by: Gurujothi on May 24, 2012 21:54
  
  Published by: Gurujothi on May 24, 2012 21:54

  Try something like this...

  BEGIN
  IF: PXX_LEAVE_TYPE = "Sick" THEN
  UPDATE LEAVE_TYPE
  THE PATIENT VALUE = SICK -: PXX_NO_OF_DAYS
  WHERE EMP_NAME =: PXX_EMP_NAME;
  ON THE OTHER
  UPDATE LEAVE_TYPE
  DEFINE CASUAL = CASUAL -: PXX_NO_OF_DAYS
  WHERE EMP_NAME =: PXX_EMP_NAME;
  END IF;
  COMMIT;
  END;

• I want that my previous method of search bar back. Changed how update the search bar works now and I hate it!

  Latest update of Firefox changed how to search bar functions. This should NOT be done automatically without warning of a person on the changes. I have problems using this new method of research, and I hate it. I want than the previous method return. A contributor has tried to help him, I guess. But what he suggested did not work. I can't fix thru on Firefox. A window opens and does nothing. About Firefox does nothing, but look at me. I don't know how to enter the configuration of Firefox. I appreciate the-edmeister tried to help me, but nothing has changed. There, someone knows how to give back me my old search bar?

  It's not On Firefox's Subject: config as explained here:
  https://support.Mozilla.org/en-us/questions/1035119

• Satellite A10: How update the DVD-rom?

  Hello

  I wounder how to upgrade my DVD-rom?
  Where can I find the name and number and where to find the updates?

  SlugO

  Hello

  I put t know what you want to be updated on your drive, but generally you will find details of the drive in the device manager of your OS.
  Check the properties of the drive.

• How update the payment information for Windows Live services?

  Original title: payment to the window Live Services

  I received your message updated my credit card to pay for windows live. I followed the link. I went to 'Payment Type' but it has no connection with the update of credit card, is it has codes that shows specific period and each period shows no activity for us. How to upgrade your credit card information so that we can make.

  More far away why are you keeping it so confusing for one single payment? I am pasting the message that I received from windows live that doesn't work not as indicated: -.

  To view or change your billing account, go to https://billing.Microsoft.com , then select one of the following options:

  • To update payment information, click on link of payment under "Type of payment" on the next page, click on 'Go to payment method information' and on the next page, click "Edit payment method information.
  • To view a statement for a payment method, click the method of payment under "Type of payment".

  Thank you

  Dushyant Parikh

  Hello

  The question you have posted is better suited to the Windows Live community. I suggest you to send your application in the Windows Live community on this link.

  http://www.windowslivehelp.com/

• How update the Firmware on my router?

  I downloaded the firmware file of my router (WRT54GS V7) Linksis wireless because I have problems with the router itself reset while I play, but I can't understand how to install it.  The default program that wants to open the firmware file is VLC (a media player).  What should I do?

  Edit: I'm trying to re - download the file firmware to see if that helps, but now the download links aren't working yet... What is happening here?

  Edit 2: I also try to read the FAQ because it seems that they already have an answer to my question, but the answer page is not loading either.

  The site is under maintenance or something?

  The linksys Web site works fine now. If you still have problems, you must connect the computer directly to the modem for download.

  You should not open the firmware file that upload you to the server. Do not open it with any application. Do not change under any circumstances. All you have to do is to download the file and upload it to the router through the web interface. Download the firmware on the linksys site. Save it to your desktop.

  Then, open a browser and go to http://192.168.1.1/ which is the web interface of the router. The default password is "admin". Search for the function of the firmware upgrade. It's usually somewhere on the Administration tab. On the firmware upgrade page that you see a browse button to select the file to load on the router. Select the downloaded firmware file. Press the upgrade button.

  Do not interrupt the download. It is recommended to disable any firewall or anti-virus while accessing the web interface for the firmware update. The process should not be interrupted. Otherwise you can find yourself with a router of bricks.