Black monitor HP Pavilion a6000

Similar Questions

• HP Pavilion DPGEK44 Gaming: HP Pavilion Gaming DPGEK44 connected via the monitor HP Pavilion 24xw - no sound

  The sound on my laptop works fine until I connect it via HDMI to a monitor HP Pavilion 24xw.  Then the sound disappears.  If I disconnect it, the sound comes back.

  I tried to go to the 'Sound' of the control panel section.  There are two options:

  Realtek High Definition Audio speakers

  HP 24xw

  The default value is Realtek speakers.  When I use the test installation my laptop plays the sound test.  I've updated to the latest version of the driver.

  If anyone can help with why where the monitor audio disappears from my laptop?

  Thank you very much!

  Hi @Cat999,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Pavilion Notebook DPGEK44 game, when you connect the HDMI cable to a HP Pavilion 24xw monitor. I'm happy to help you!

  Please try the steps in this guide, Troubleshooting HDMI screen and sound Issues.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Power supply problem - HP Pavilion a6000

  Desktop will not power.

  HP Pavilion a6000.  Power supply: Bestec, Ref. HP 5188-2622

  Press the power button / stop for 10 seconds.  Red switch moved back.  According to the Web site.

  Nothing has changed.

  Here is what is happening now:

  Machine unplugged

  Green LED - off

  Plug the power adapter.

  Green LED - suite

  Press the power button

  Light in the power button blinks momentarily (the beginning of being depressed) then turns off

  Power supply fan turns momentarily then stops.

  Green LED - off

  Remove the power plug

  Green led is lit for 5 to 7 seconds, then turns off.

  Events repeat if I plug again.

  Any advice?

  He will be generous with points...

  Looks like you need to replace the power supply. You can buy the same HP unit or replace it with something like the Corsair CX500 if you wish.

  Please send Bravo

• HP Pavilion a6000: hp Pavilion a6000 ethernet driver windows 764-bit

  I'm looking for driver ethernet to the desktop hp Pavilion a6000 for windows 7 64-bit, no idea how cn I download this driver.

  You are the very welcome.

  Download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• HP Pavilion a6000: I have HP Pavilion a6000 and want to add a new WD 1 TB Hard Drive blue

  I have a HP Pavilion a6000 and you want to add a new WD Blue 1 TB hard and clone (including OS) the old 250 GB hard drive to the new drive and then use the old drive for music.  What should I do?

  You are welcome.

  Sorry, but I can't help you with the question about the SATA motherboard ports - hopefully someone else can help you here.

  However, for cloning, you can use a USB cable to SATA, with which you can connect your hard drive to the USB port on the computer and transfer all the data from the old to the new drive.

• Pavilion a6000 - where to download drivers pci sis 900.

  I have a HP Pavilion a6000 wherein I loaded Windows XP on. I can't access the Internet and I need help. Before I find download info on sis 900 pci fast internet and loadad card and it worked fine. I caught a virus from e-mail and reloaded windows xp but I ain't flashdrive with the sis 900 download site pci along with (I think that Netgear fa-311). It there a way I can download sis 900 pci and netgear from another pc on a flash drive and reload a6000 pc?  Otherwise, please give me the site to download sis 900 pci and netgear 311 fa... Thank you

  This is my friend.

  Silicon Integrated Systems (SiS) 900 PCI Fast NIC Driver

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=1844705&prodNameId=1844706&swItem=PSG_I23267-108230&swEnvOid=1093&swLang=8&taskId=135&mode=3

  FA311v1 10/100 PCI Network Interface Card

  http://support.NETGEAR.com/app/products/model/A_ID/2357

  Click on the download tab.

• 22fi HP PAVILION monitor: monitor HP PAVILION 22fi

  Hello

  I have a problem with my monitor HP PAVILION 22fi, the display of the monitor changed showing green on the left side with horizontal lines, I cheked it change for vga displays card guard if there is a problem with my graphics card, I found that this graphics card has no problem at all... I believe that the monitor has some display problems, help me to find a solution, but still its guarantee on.

  Product nameAVILION 22fi in monitors

  Serial number: 3CM30203ZF

  Product number: C8H77A7

  Thanks in advance,

  Rafiq.

  Hi Dean associate.

  I've done all these things, but it won ' t work, Nevermind he slipped by fluctuation of power... now its works well

  Congratulations,

  My greetings to you for Alain...

  Kind regards

  Ali

• Laptop black screen, HP Pavilion G60 - 237NR 16 "screen

  Hi, my name is Saenuri.  I need your help.

  Operating system is Windows 7 32 - bit, Prod # is NJ537UA and model Pavilion G60-237NR that I bought in 2009.

  Recently, the screen is black, but the external monitor works fine when connected.   I need your suggestions to solve this problem.

  Thank you very much.

  Thank you very much.

  Unfortunately, my power connector is broken and bad, may be able to use the bot new laptop.

  In any case, I would like to appreciate your kind suggestion.

  KIM

• HP Pavilion 25xw: new monitor - Hp Pavilion 25xw

  Hello

  You just bought a new HP Envy 750-129cb here in the Canada, and it is great... but one thing:

  It came with a HP Pavilion 25xw - Moniotor

  (1) I do not think, but is the touchscreen monitor? It is not currently, but maybe I'm missing something?

  (2) it doesn't seem to be any built-in internal speakers - is this correct?

  Thank you very much.

  It does not have built-in speakers. You're not missing something, this isn't a touchscreen

  The specifications as follows

  http://store.HP.com/us/en/PDP/HP-Pavilion-25xw-25-inch-IPS-led-backlit-monitor

• Tecra A11-128 does not start - black monitor, only the fan is on

  My laptop starts to boot, a few seconds later, the fan runs all the time and at full power. Here the detailed steps:
  -Push the Start button (battery led is green)
  -the hhd led is green for a short time, then off
  -l' screen is black all the time
  -After a few seconds, the fan starts at full power
  -That deer situation change either, I must break with 5s on the Start button

  I tried several keys (Fn + F2, ESC, F5) while starting up, as an external monitor. Nothing has changed.

  Who has an idea? Thank you very much for your help!

  Hello

  If the start of the BIOS (or Toshiba) screen does not appear, it means that a serious motherboard hardware problem can cause this RAM modules or malfunctioning CPU would be possible
  Recommends checking the memory RAM and CPU modules
  The RAM modules could be replaced easily but it of difficult to replace the CPU and test it. Therefore, it would be a job for a technicians for laptop

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• w2207h monitor and Pavilion dv6t

  I have a new Pavilion dv6t Select laptop running WIndows 7 64 bit directly connected to a monitor in w2207h 22. It does not preserve the configuration of display resolution when I power it back up again.  Before he turned off had a resolution of 1680 x 1050 configuration, small icons, and other parameters, the first two being those that I am more interested in maintaining.

  I used to have a laptop no HP on a docking station connected to this same screen, the old laptop had no problem to recognize the resolution that I put up on the screen.  In fact, all I had to do was power up and presto.

  My new dv6t does not keep the display setting unless I do the following:

  (1) I opened the lid of the laptop and start it (if it is extended or not standby mode)

  (2) when he us operational, the monitor looks different (large icons, fuzzy fonts, lower resolution).

  (3) I use the F4 key to tell him that I have duplicate monitors.

  (4) the monitor then displays the appropriate resolution.

  If I don't tell her to do with the F4 monitor rest at the wrong resolution (for example (for the larger icons, fuzzy fonts, a lower resolution).

  I'm annnoyed enough I need to power my laptop by opening the cover when it is connected to the monitor, but now I have to do the extra step of the F4 to get the external screen is displayed correctly.

  Any ideas as to why the monitor does not display the appropriate resolution when I turn?

  Thank you!

  Yes.  It's good information. Thank you.

  Try using the latest version of the ATI video driver.  Don't forget to create a system restore point before updating the pilot arrived that something goes wrong.

  Look at the bottom of the laptop.  Do you see a sticky HP label with the model number?

• Output black monitor

  I have episodic 'black out' on my screen on your desktop d5000t. In my view, there is a problem with the power monitor video card driver. The problem seems to have started, because I installed Windows 7. I tried reinstalling the driver, but the problem persists. Help!

  I discovered that it was a power supply problem. The computer began to stop and I replaced the power supply and all problems are solved!

• Connect the second VGA monitor to Pavilion HPE

  Hello

  I have a Pavilion HPE h8-1114 PC, that has a DVI and HDMI monitor port. I have a VGA monitor connected to the DVI port with an adapter. I have a second VGA monitor, I want to connect, but I understand that it cannot be connected to the HDMI port. Are there other options besides buying a HDMI monitor? Can I use one of the covered ports which I think is VGA? (I guess not.) Can I add a second graphics card with a VGA port and use both screens? (I saw on another post that adding another graphics card could disable the existing card). Can I opt for a card that supports two VGA or DVI ports?

  Thank you!

  In addition what erico said, there are other options. You can use a video-to-USB adapter of EVGA UV plus + 19 or you can add a x 1 PCIe graphics card. If with a PCIe x 1, using a card Nvidia... results will be the best in this way.

  Frank

• Two monitors of Pavilion P6610f

  A previous post on this topic left unanswered question of the user.    I have a Pavilion p6610f product #BM417AA #ABA.  Given that this machine has both a output VGA AND DVI output, it is possible to have TWO monitors (working simultaneously) provided that a monitor is analog (VGA) and the other monitor is digital (DVI)?  I didn't "want to go to the load of the material, if only one of the two monitors can be used at a time.  Thank you.

  The chipset on the motherboard is able to handle two monitors. And I found this on the motherboard page: http://support.hp.com/us-en/document/c02560084

  Integrated graphics: concomitant use of DVI and VGA ports is supported.

  So, Yes, it seems to support the two ports.