Black scree

Similar Questions

• Stuck on black scree with Apple logo

  my iMac stuck on the black screen with the logo of Apple and dialogue saying installation software update about 14 minutes. It was an hour ago, what should I do?

  Turn it off and restart. It should resume the update.

  TT2

• How to get around the Startup Manager and the black scree at startup

  tried to deactivate the boot manager of arise to stat upward by going to advance settings and put the 'the operating system display list' to zero. However, the Boot Manager always appears at the star for a few seconds and then the screen goes black and possibly windows vista starts. What can I do to work around the Boot Manager and the black screen at the star to the top? I tried the system recovery option, but it didn't work. Can someone help me?

  Thank you

  Hello

  I suggest you to see link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-default-operating-system-for-startup-multiboot

• Dell computer with windows vista. I turn on my computer it boots up to the blasck with the dell logo screen, then goes to a black scree requesting a password, how can I get around this.

  Dell PC. When I turn on the computer Dell black screen appears as always put then it goes to a black screen asking for a password.  I don't remember set the CMOS passwords.  Help, please

  Hello

  If she asks for a BIOS password, contact Dell

  http://support.Dell.com/

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• Question of mode standby or sleep on Satellite L300 with Ubuntu 8.10

  Hello

  I have a problem with the standby or sleep mode. the nb closed but stopped with a black scree informed a 3 statuslights of gree on. He will not take the final step to close completely. I could only push the power button for 15 seconds to kill the system.

  I posted this in the ubuntu forum, but I have no answer

  Thanks for the information

  Thorsten

  ACPI manages the functions of the power supply, then maybe you need to update/configure the ACPI module/driver?

• Acer Aspire not start after cleaning the fan and re - paste.

  I need help, I cleaned up my Aspire 5750 was dust accumulated during the last 3 years, I dismounted, clean the fan, re-glued the CPU and put everything back carefully, when I turned on it, the rotations of the fan for a while, then turns off, gets battery (change from orange to blue) but black screen only. What is the fried MB? Please give me some help here.

  I have checked the connections, changed the battery CMOS, tried pressing the power button / stop without the battery and the network for 20 sec.

  Thanks in advance.

  Ironfly. thanks for the suggestion, but I solved the problem by inserting a small file of Scotch (2mm thick) between Mo and the top cover, I got the idea from another post of member's (royrempel) in another thread in this forum found here:http://community.acer.com/t5/Notebooks-Netbooks/Acer-Aspire-5552G-power-light-but-only-a-black-scree...

  Thanks for the reply, it is still very useful when we panic and start looking for a new MB

• cannot boot from windows dvd/usb

  cannot start windows from dvd or usb. I was installing windows on my destop I formatted my c:\ drive to install windows suddenly halfway so that installation was in progress the process collapsed and abandons a pop' unable to retrieve file ' since cannot start windows from dvd or usb. eveytime a screen

  Windows could not start. recent hardware or software change might be the cause. to solve the problem
  1. Insert your windows installation disc, and then you restart the computer
  2. choose your language settings, and then click Next
  3. click Repair on you computer.
  status-0x000000f
  Info: the boot device has failed because a required device is not accessible.
  whenever I have use installation dics, I end up with this after a few blinks of small line on black screen after restart
   
  also tried usb Boot I just get a black scree after reboot.

  Thanks BearPup for the reply. I was finally able to install ubuntu via the usb port. I was unable to do so earlier because my web cam was still attached to my key USB only. I removed it and then finally installed ubuntu relief. now I will install windows.

• Lost project - can use the files transcoded to yet?

  I had a serious accident on my system, and if I was able to restore most from a backup, I have a project where the source files have disappeared. I have the files transcoded in encore, it's xxx.ac3, xxx. M4V and xxx.m4v.xmpses. I can read the reminder film, but is it possible that I can make a video of these files? The format is Blu Ray. I tried to write to the directory of the BD and BD .iso file, but when I try to play, I don't have the sound, the video is just a black scree.

  Best regards

  Ulf

  That sounds about right.

  From windows Explorer, you can play the file xxx.m4v?

• Movie maker scree - black

  I'm doing a movie with clips I imported, but the scrfeen is all black when played.  They play at the set custom in media player.  How can I fix it?

  How to upgrade my video driver

  =======================================
  If you have a portable computer... go to the support site for your computer manufacturer.

  If you have a desktop computer... go to the website of your video adapter support
  Reference of the manufacturer.

  The following article can help you find the brand/model/driver version of
  your video card:

  Update Windows Vista graphics driver
  http://www.CGL.UCSF.edu/chimera/graphics/updatevista.html
  If you find a video updated driver... it would be a good idea to create a
  System restore point before you install it. Also be sure to follow all
  installation instructions that may be available on the download site.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Black screen. Message stating that I "be victim software counterfeiting."

  I got a message "you may be victim of software counterfeiting.  This copy of Windows does not pass genuine Windows validation. "This software has been installed on the computer at the time of purchase.  It's Windows XP.  The sticker on the Tower said. "" Designed for Microsoft Windows. I don't have my chosen wallpaper.  The screen is black with the icons still showing on the left side of the scree, thank you for your help.

  This means that your Windows Windows Genuine Validation will fail, start by checking your date and time system and make sure it is correct. It should allows you to solve now , click on that and follow the online guide.

• Studio XPS 9100, Ati HD5670, flickering of small format black and white square

  I have Dell XPS 9100 Intel Core i7 CPU 8 GB 64 - bit Windows 7 OS.  ATI Radeon HD5670.  I found a new driver dated December 2014 and loaded.  The small blocks flick went then small black line sometimes appears on both monitors, but it's not the worst of it. This new drive made me all kind of pain.  When the launch IE I get message that IE has failed.  When I open file Explorer it fails also.  I got the drive to a 2010 version and the black line of thinking in the middle of the screen has disappeared but flickering blocks returned.  I did a restore to return six days ago, but IE and Explorer of files are still not.  I really screw that constituent.

  I was wondering if my Radeon video card failed and if you think that it is perhaps the issue which video card would you propose?   At least a new video card would have current reference to the Web site with the current drivers or driver.  I don't do games but want to run three monitors (two running).  This machine is about four years with two internal 1 TB DASD, one Internal 500 GB and a 1 TB external drive.

  HELP me please I'm in trouble AND I THANK YOU for your help.

  
  I forgot to mention that I ran a Scan of the file as an administrator of the DOS command prompt, I am under MS Virus and Malware full Scan.  There is no longer a couple, I can take as the safe boot mode see if problem persists.  And then perform a clean boot and finally a scan of RAM memory.  I already did a restore of the system 8 days ago.  Guess I can make one "in Place Upgrade' as the last step at least think a person would be better off buying the new video card since this problem of flicker developed a few months previously and not related to my efforts to update HD5670 ATI Radeon driver to the latest version.  It seems almost obvious to me is a graphics card problem, because a change in the Version of the driver to change the shape of video problem scrapie blocks of black and white in the corner of the scree in a detroit thin black line in the middle of the screen.  However technology can be difficult, but does not seem plausible as a problem of video card with the new driver changing the display screen problem but by introducing the serious problem of failing IE and Windows Explorer.  The full scan just finished with a browser quarantined modifier.

  "Point of entry not found. designates the malware has replaced this file.

• iPhone 7 more (Black - 128 GB) still "processing Elements"!

  Hello

  I ordered my iPhone more black 7 128 GB on September 9 in Dubai (pre-order day itself) and it showed that the delivery would be from 4 to 10 October. Today IS OCTOBER 4 and my order status is STILL "Of ELEMENTS OF TREATMENT." I don't understand why its always 'treatment Items' in the week of delivery.

  How would it take for the process to go further.

  If someone has an idea, pls let me know!

  Thanks for reading.
  Waiting for answers,
  See you soon!

  Hello

  You will receive a shipment notification when your order has been shipped, and to access the tracking information.

  I'm afraid that no one here can tell you when it will be.

  It is a community of support based on the user.

• IOS 10.0.2 cameras does not work (only in black)

  Camera and camera back does not work (all black), I reset my iphone from the PC and the phone, but does not please you see in the picture. Help.

  

  Hello

  It may help to follow the steps detailed here, including forcing the camera nearby application:

  • Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• IPhone 5 s screen turned black after jettisoning

  I dropped my Iphone 5s in the Park. The screen worked fine after release for 2-3 seconds and that I moved to the bench, it turned black on the first move. The touchscreen works perfectly fine because I can pick up calls. Is my broken screen?

  Hello

  It may help to follow the steps detailed here:

  • If your iPhone, iPad or iPod touch won't turn on - Apple Support

  However, as your iPhone has been abandoned and seems to have suffered damage, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar to organize your iPhone to inspect and, if the service is recommended by Apple, to determine your available service options, deadlines and costs.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/au/retail/Geniusbar/

  Repair service for iPhone price information are available here:

  • price of Service - Support Apple iPhone