Black screen after installing attempt

Similar Questions

• Black screen after the attempt to upgrade to windows 10

  I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

  Hi Chris,

  I'll be happy to help you with the problem you have with black screen.

  The problem may occur if the video drivers are not updated.

  What is the model of your HP computer?

  I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Please reply with the results, we are happy to help you.

  Thank you.

• Pavilion G6 1332el: black screen after installing drivers

  I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

  Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

  After all, I did a normal Shut Down.

  When I powered THE next day, after Windows Logo disapier, only black screen remains.

  I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

  I'm here, can I di to solve my problem?

  Thank you!

  apashi

  I'm guessing that you have reinstalled Windows from a DVD, right?

  Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

  You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite X 200 - 23 g - black screen after install NVidia drivers

  The problem appeared after reinstall Windows XP Professional. With installed NVidia drivers (179.28) after reboot the screen is black. System booted normally, sounds, it has played. With no installed NVidia driver picture is normal. After reading forums I understand this problem with properties of the monitor's EDID.

  Linux systems to use the UseCustomEDID property, and use received monitor EDID struct everything works fine. Windows not not a similar option. Also, it is impossible to complete the installation from a resuscitator of disc. Black screen on the final stage. To restart with the mode VGA Vista say, who is unable to complete the installation in this mode.

  Can you help me?

  Hello!

  I've never heard of this EDID you want to say, but you should use Toshiba drivers.
  Because no Toshiba driver don t have the graphics card overheating protection can overheat. The graphics card may be damaged.
  With the Toshiba drivers, you are on the safe side

  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Then try to start in safe mode, remove the old graphics driver, restart the computer and then install the drivers of Toshiba.

  Good bye

• E5 - 511 black screen after installing Windows 10

  Hi, not sure I can ask a question here already?

  Well, this: I improved my longs E5-511 Windows 8.1 for Windows 10. After a cold start, it appears a black screen, until I have press the power button until it stops. Start again, it's OK, although slow. I found discussions on this matter by Google, it seems men to the Intel HD Graphics driver. According to Device Manager, I later. There is a 64-bit device driver Windows 10 on the Intel web site that looks much newer, but it refuses to install it.

  Any ideas?

  You can try the drivers on the website of acer for your model:

  http://us.Acer.com/AC/en/us/content/drivers

  If this does not work, you can download and use the Intel driver update utility.  The best thing to try first the driver from the Acer site.

• Start on black screen after installing updates

  is please help because it is very annoying because I have to always use my vista recovery disk, then click on repair your computer to get my computer restart.

  * Title *.
  After that I'm going to restart my computer to apply updates my computer past the start screen and does not display the vista logo and stays on a black screen.

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On Qosmio G30 black screen after installing Windows XP

  Hello world
  I want you help me solve my problem.
  I have a Qosmio G30E - 148 and when you install a new program, the BSOD had been posted. prevents me from having access to windows from
  normal mode and safe mode.
  Then I installed a new Win XP manually and when trying to install the screen to black color display (nvidia geforce go 7600) driver and I turn it off
  safe mode in order to use windows.
  Another favor, I need a driver for ethernet controller and multimedia video controller because I can't find them.

  Thank you for all.

  Hello

  I have several question for you:

  -What system was installed before? Windows Vista?
  -where you have downloaded the display driver? On the Toshiba site?
  -You can find all the necessary drivers in the section download the drivers on the Toshiba site-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
  Simply choose XP MCE as an operating system, the drivers are the same as XPPro/XP

  Hope I could help, if you have additional questions just ask. :)

  Greetings

• black screen after installing intel driver grphics hd in windows 8.1

  whenever I have install intel hd graphics driver in windows 8.1 that is installed by the boot camp assistant, the screen goes black, if I uninstall driver he became normal.

  I can't adjust the brightness to 8.1 without graphics driver.

  I can't find trackpad in victory 8.1 and his pilot online, I have to click, it supports not the tap or double-tap.

  If this driver Intel GPU is organised?

• Satellite A100-495 - black screen after installing Windows XP Home edition recovery

  After the recovery and download of updates and the XP operating system that the screen remains black, bios does not start, and XP does not start.

  What can I do?
  A I press a certain key combination?
  How can I reset the laptop again?

  Who can help quickly?

  Hello Ralf

  Stand by. If I understand you just your laptop does not work.

  What happen exactly when you press the power button / stop? You don't see anything on the screen? You see Toshiba welcome screen.
  Power is ON?
  Is there a any reaction?

  Remove the battery and leave the laptop for some time, connect the power supply only and try to start it again.
  To be honest, this whole thing is strange. Recovery image installation is not responsible for this kind of behavior. Have you done something else that may be responsible for this?

• Re: NB100-11R: black screen after installing the Vodafone software

  Since the installation of the software Vodafone to enter the internet, my screen remains black.
  The netbook works fan runs well, it's just the typical noises when starting.
  I don't know what it can be broken.

  Would need to help, you have a suspicion which can be?

  Thank you
  Florentin

  Hello

  It seems that this software confused your OS.
  Try this;
  Start Notepad, and then press F8. Usually, the Advanced Boot Menu should appear.
  Now you should choose the option: last good configuration.

  Alternatively, you can try to start the computer in safe mode. The option can also be selected in the Advanced Start Menu

  Select this check box.

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Qosmio X 870-149 - black screen after update to 8.1 win

  After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

  It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

  I still have a warranty on my Qosmio toshiba

  Hello

  Well, the guarantee covers material related problems. It does not any problem with the software.

  Now the question is: why the black screen appears?
  Is - this problem is hardware or software?

  What happens if you access the BIOS?
  You don't see anything on the screen?

  Something is visible on the external monitor?

• New installation 8.1 Windows black screen after logo

  I met a black screen when installing Windows from a USB Pendrive 8.1 after the logo at the beginning.

  After research on internet and do not find the answer, I had a bright idea: format my hard drive (SSD), I had Windows 7 installed on it.

  1. I removed the hard drive from my laptop.
  2. I attached my drive to a USB adapter and removed the partitions on the disk with 'Create and format hard disk partitions' on another PC.
  3. Replace the hard drive in the laptop.
  4. Tried again and the installation works well!

  My laptop:

  HP DM1-4000sd

  SSD

  8 GB memory

  I hope this helps others!

  Thanks for sharing the solution which worked for you, hope this helps others

• HP 2000-2c22DX Notebook PC: HP 2000 - black screen after login

  Hi, I have a hp 2000 laptop that has a black screen after I login. I have used F9 or ESC tab and follow the directions shown by others with the same problem, but nothing has changed. Sometimes he goes to the site of Regclean Pro I installed when I got the Pc, but suffice it to say you have error and difficulty buying Regclean. I once the buy, but nothing has changed. Please help, I have a lot of photos that I don't want to lose. Thank you

  Try to install the free version of MalwareBytes. After the installation to run a full analysis:

  https://www.Malwarebytes.org/products/