black screen that says missing or corrupted file windows root\system32\hal.dll

Similar Questions

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ErrorWindows could not start because the following file is missing or damaged. Windows root\system32\hal.dll where can I find? How can I fix error?

  I turned on the PC and you have question.  I am disgusted.  Now what should I do?

  I turned on the PC and you have question.  I am disgusted.  Now what should I do?

  Please follow the instructions below. If you do not have your windows disc follow instructions on the link below to create a bootable recovery disk console and then return here and continue with these instructions.

  1. Insert the Windows XP CD in the CD-ROM drive and restart the computer. If you are prompted to press any key to boot from a cd do;

  2. when the "Welcome" screen appears, press R to start the Recovery Console;

  3. If you have a dual-boot or multiboot, select the installation that you must Access from the Recovery Console.

  4. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER;

  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k). Let the scan to run until the end;

  6. to exit the Recovery Console and restart the computer, type exit at the command prompt and press ENTER.

  Once the scan is complete, restart your computer.  View your results.

  How to make a disc bootable windows Xp recovery console.

• Error message: missing or corrupted: [Windows root]\system32\hal.dll

  We bought a new pc with Windows 7. My autocad program is not compatible with this op system so I kept the old pc and plan to use it for autocad only. When I tried to boot the old pc, the following message appears: "Windows has not start because the following file is missing or corrupted: [Windows root]\system32\hal.dll.» Any have a solution outside shoot the operator?

  Hi DickBernhardt,

  These articles may help:

  How to fix System32 Hal.dll:

  http://www.ehow.com/how_6184909_fix-System32-HAL-DLL.html

  How to perform a repair of Windows XP Installation:

  http://pcsupport.about.com/od/OperatingSystems/SS/instxprepair1.htm

  How to restore Hal.dll from the Windows XP CD:

  http://pcsupport.about.com/od/fixtheproblem/HT/restorehaldll.htm

  I hope this helps.

• Windows root system32\hal\dll. missing or damaged

  can not turn on computer says cannot access windows because windows root system32\hal.dll. is missing or damaged.  How can I fix it

  Hi piccard49,

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boot my PC, I get a black screen that says ultra dma mode-6 s.m.a.r.t capable.

  When I start my PC, I get a black screen that says ultra dma mode-6 extended s.m.a.r.t. capable but disabled keyboard interface error press fi to resume when I do that it starts as normal, when I posted e logitech about this they said: enable smart in bios and save.  I can't remember if they said it was a hard drive or a hardware problem, how can I go to the bios either no matter what.  I have a keyboard and wireless mouse

  Thanks M Clark

  Hello

  I suggest to reset the default settings to default and check for the issue.

  You may also contact the manufacturer of your BIOS to change these settings.

  Important note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   

• Ntoskrnl;. exe that is missing or corrupt file error

  I have a laptop with a ntoskrnl;. exe file that is missing or corrupted and cannot rebuild or load from cd, can I download this file somewhere, or what I can do to re - install this file and how?

  Hi WEBERSCHLOTZSKY,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. what happens when you try to copy the file from the Windows XP CD?

  There are several reasons for this error message to occur.

  This problem is often caused when the boot.ini file is missing or misconfigured. This problem often occurs when a user has recently added or removed from an operating system on the computer or added or deleted hard disk drives in the computer.

  If you are unable to start Windows and the error message then consult the below Microsoft article and try the steps mentioned, check if it helps.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• OS does not start and screen with the error (root) system32\hal.dll windows is damaged or missing black

  I was trying to stop some HP programs to start when I start my desktop computer. I did the following: start > run > msconfig.  Click on startup and unchecked HP four applications. Restarted my desktop computer and immediately had a black screen with the following message:

  The window could not start because the following file is missing or damaged:

  system32\hal.dll

  Please reinstall a copy of the above file

  I can't do anything in Safe Mode or one of the other options. Cannot re - install Windows XP Home Edition because Windows or Internet Explorer 8 will not run. Only the black screen and the message mentioned above.

  I use a desktop Dell Dimension 8400 computer.

  [1] Just finished everything on your step 10. I went with the Microsoft Security Essentials.

  [2] I still need to download site driver Dell trying to correct this "floppy seek failure pilot 1,2 and 3 not found: ATX, SATA 1, 2 and 3' problem"

  [3] I just got e-mail from Microscoft response that the thread that I created has been deleted, so I answer to you of a past replica.

  Wanted [4] Thank you for your time and patience to help me. Is there something else to do for me, you can recommend?

  A1. Wise move IMHO. The computer seems "snappier" now?

  A2. I can't imagine that another owner of a Dimension 8400 (or 4800?) has not encountered this problem before. Discover (i.e., search) the Dell office equipment forum: http://en.community.dell.com/support-forums/desktop/f/3514.aspx. If necessary, start your own new thread (registration required).

  A3. If you start another thread on the computer, I have posted a reply to this & you asked to publish a follow-up replies to your original thread. [?]

  A4. Welcome & thank you for your comments.

  In fact, there is something else you may need to do: it turns out that KB2607712 is replaced by the KB2616676 in Vista & Win7; Windows XP needs to have both installed [despite the mention you referred in your post on September 14, above] !!!

  => So if Update for Windows XP (KB2607712) is NOT listed in Add/Remove Programs, you will need to manually download/install a revised version [long story, involved - you don't want to know]:

  ~~~~~~~~~~~~~~~
  ACTIONS:

  1. open Internet Explorer to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27244 & click on the button CONTINUE.

  2. after VALIDATION, download the installer for KB2607712 & save it to your desktop - NOT run again!

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #2 above to install the update. Follow all the instructions (reboot required).

  5. check that the Update for Windows XP (KB2607712) is now listed in Add/Remove programs.

  ===============

  PS: If you have NO Office or Silverlight or any installed Windows Live Essentials application, I can tell you how to start your Windows XP computer & full load more quickly.

• When I turn on my computer, I get a black screen that says "NTLDR is missing" or "NTLDR is compressed".

  original title: NTLDR missing/Tablet

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  See https://www.google.com.au/search?sourceid=navclient&aq=0&oq=NTLDR&ie=UTF-8&rlz=1T4IRFE_enAU448&q=ntldr+is+missing&gs_upl=0l0l0l12905lllllllllll0&aqi=g4&pbx=1

• I turned on my computer today and it has a black screen that says "no operating system"

  It should work I put in a backup CD, and it does not recognize. And when I try to type it don't beep loudly. Help, please!

  It seems that you need a professional, the reputable repair shop to take a look.  Many things to default, little ability to solve problems.

• Root Windows satellite 5200 701 system32/hal.dll missing

  My Toshiba s5200 701 crashed today.

  Windows displays this error:

  + windows didn't start because the following file is missing or corrupt: windows root system32 / hal.dll +.
  + Please re install. +

  First of all, this Toshiba is a European model and I live in the USA.
  Second, the model is old.
  Third, I don't have the XP CD reinstal the OS.

  I don't know if it's worth buying a new professional XP for this computer.

  All ideas, suggestions. Please notify.

  Jose

  Hello

  I read on issues such as
  You need to reinstall the OS, but it would also be possible that this error is related to the defective HARD and/or RAM disk.
  Many uses had this error again after the new installation of the OS and in individual cases the RAM or the HARD drive has been affected as well.

  What to say; It s your decision what you want to do... I recommend reinstall Win XP once more to verify if this question relates only to lack hal.dll in the system32 folder.
  However the Win XP license is cheap, because Win 7 is on the market and no one wants to use 'old' OS which will be more in the coming years...

• Missing or damaged"< root windows > \system32\hal.dll.

  I get the message "Windows cannot start because the following file is missing or corrupt" \system32\hal.dll. It is a Dell computer running windows XP that came preloaded on the Dell. I've been running this computer for years before, without this problem. Can anyone help?

  If the computer is not currently bootable,

  Then, you will need to borrow an xp installation cd to start the computer and run some commands through the function of the CD recovery console.

  Another option, to remove the hard drive and install it as a slave on a functional computer disk.   then use this functional computer and the o.s. to fix the problem on this slave drive.

  Another option is to see if dell experts have a different methodology to fix the error.

  There is a community forum to dell.com dell, where you can ask this question.

  in all cases, the question you have is not uncommon and has been requested and answered thousands of times.

  Here is more information about this:

  http://www.google.com/search?sourceid=navclient&aq=0&oq=missing+or+corrupt%22+%3cwindows+root%3e%5csystem32%5chal.dll&ie=UTF-8&rlz=1T4ACEW_enUS421US421&q=missing+or+corrupt+windows+root+system32+hal.dll

• system32\hal.dll. missing. computer will not start. Help, please. I don't have an xp cd. XP is installed on the hard drive

  Hello
  My laptop is not at all start. It is just coming up with the error message "windows root>\system32\hal.dll. missing. Please reinstall a copy of the above file.
  Everything I can find on the web so far tells me to reinstall via an XP CD. My version of xp was preinstalled, because it's a computer dell laptop.
  Can someone help me?

  Hello
  Please take a look at this article and follow the steps in troubleshooting bottom of the page.

  http://support.Microsoft.com/kb/314477

  I hope this helps. Just reply to the results.

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Acer aspire 5742 goes from black to a screen that says acer enter startup f2 then back to

  My acer aspire 5742 doesn't start correctly, it goes from a black screen to a screen that says acer enter startup f2, then alternates between these two screens.

  Right now I have managed to turn it on and I'm in the treatment of support up to an external hardrive.

  I rang acer support and they told me I did this install windows 10 (about six months ago) and although he seemed fine, it was corrupting the (motherboard? I think that's what she said). the lady told me that I should restore laptop to factory settings.

  Can someone please confirm for me that's what I have to do?

  The fact that you were able to start normally after F2 in the bios menu, F9 to re - set the bios to factory default then F10 to save this setting, the default BIOS * strongly * suggest that the bios was losing his in the memory of the specific hard drive that was installed.

  Jack E/NJ