Root Windows satellite 5200 701 system32/hal.dll missing

Similar Questions

• system32\hal.dll. missing. computer will not start. Help, please. I don't have an xp cd. XP is installed on the hard drive

  Hello
  My laptop is not at all start. It is just coming up with the error message "windows root>\system32\hal.dll. missing. Please reinstall a copy of the above file.
  Everything I can find on the web so far tells me to reinstall via an XP CD. My version of xp was preinstalled, because it's a computer dell laptop.
  Can someone help me?

  Hello
  Please take a look at this article and follow the steps in troubleshooting bottom of the page.

  http://support.Microsoft.com/kb/314477

  I hope this helps. Just reply to the results.

• Windows root system32\hal\dll. missing or damaged

  can not turn on computer says cannot access windows because windows root system32\hal.dll. is missing or damaged.  How can I fix it

  Hi piccard49,

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A300 - System32\hal.dll file is corrupted or missing

  I have a Toshiba Satellite Pro A300, which says that the System32\hal.dll file is missing or corrupt.

  Is it possible to repair the file by a recovery by the laptop itself, or do I have to get a copy of Windows Vista to start over and do it this way?

  Hoping to get some possible answers to what to do.

  Thanks Christian

  Hello

  I read that some discussions in different forums and in most cases the new OS installation may solve this problem. The HAL.dll in place in C:\Windows\system32 then maybe you could solve this problem in copy this file from the Vista CD in this folder

  You could start the unit by using a Live CD (linux or windows lice CD called PartBe or WinPE)
  But the easiest solution would be to the recovery procedure

• Windows XP does not start. «< Root Windows > \system32\hal.dll missing.» Reinstall the copy of the file"how to replace this damaged file?

  Have the XP Pro Service Pack 1 2002 reinstallation CD disk that does not start. most recent service Pack installed through updates.  Have the CD Drivers and Utilities from Dell 2005 "you must boot from this CD to run diagnostics, that may involve changing your computer's boot sequence. See the manual of the owner for info. I have my product keys.  Last week, I installed Norton 360 4.0.

  I am away from home long visit because of family illness. These disks were in my computer bag, but I don't have

  resources. I'm accessing the internet from another PC.

  I appreciated any help in getting my computer to start again.

  Thank you.

  Hi Sissi77350,

  · What is the model number of the computer?

  You must have the Windows XP CD to perform one of the steps to start the computer.

  See the links below: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Received message \system32\hal.dll missing or damaged, then start froze. Tried to repair with original disc and seemed to work but froze after telling me that I needed to activate the system before logging in the what I selected activate button now.

  See above

  Next time please put your question in the body of the message and not the subject line. The way you have done, it is difficult to help you.

  It looks like you have a hardware failure. If you want to help yourself, start with the hard drive, then the RAM.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Error starting: < root Windows > \system32.hal.dll file missing or corrupt

  I used the Norton Utilities 15 on my Win XP = done many times with no problems, this time however she appeared with\system32.hal.dll file missing or damaged asking to reinstall a copy of the above file. F8 opens but doesn't correct; for example, in safe mode and the latest version of work etc does not work as always guests return to error. \system32.hal.dll missing or damaged file asking to reinstall a copy of the above file.

  I have no Win install drive as it came preoaded on my computer.  Is there anywhere I can get this file to replace or am I stuck with my recover the DVD file erase all my personal files/photos etc.?

  Hi KevinHassin,

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• (root)\system32\hal.dll windows error

  I have an old laptop Dell Latitude.  Think he has Windows 2000 Professional on this topic, but not sure. Can not find the original disk. When startup it comes up with an error message (error of windows root)\system32\hal.dll. How should I do?

  Try this: http://support.microsoft.com/kb/945380

  or

  http://lmgtfy.com/?q=HAL.dll+error

  Or search in the Windows Forum using the error hal.dll as your setting.

  Good luck...

• Windows root > \system32\hal.dll error on a laptop without cd player or cd when bought

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Fortunately, not all is lost here for you. You have several options. You will need to create a CD of the utility. (1), you can boot from a usb flash drive and run utility Cd or 2) you can buy a removable usb device cd rom and there. It's the best option, but instructions differ radically, so I need to know which is your choice of boot options to help you. You won't have a windows disk to perform the procedure.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Missing or damaged"< root windows > \system32\hal.dll.

  I get the message "Windows cannot start because the following file is missing or corrupt" \system32\hal.dll. It is a Dell computer running windows XP that came preloaded on the Dell. I've been running this computer for years before, without this problem. Can anyone help?

  If the computer is not currently bootable,

  Then, you will need to borrow an xp installation cd to start the computer and run some commands through the function of the CD recovery console.

  Another option, to remove the hard drive and install it as a slave on a functional computer disk.   then use this functional computer and the o.s. to fix the problem on this slave drive.

  Another option is to see if dell experts have a different methodology to fix the error.

  There is a community forum to dell.com dell, where you can ask this question.

  in all cases, the question you have is not uncommon and has been requested and answered thousands of times.

  Here is more information about this:

  http://www.google.com/search?sourceid=navclient&aq=0&oq=missing+or+corrupt%22+%3cwindows+root%3e%5csystem32%5chal.dll&ie=UTF-8&rlz=1T4ACEW_enUS421US421&q=missing+or+corrupt+windows+root+system32+hal.dll

• Error message: missing or corrupted: [Windows root]\system32\hal.dll

  We bought a new pc with Windows 7. My autocad program is not compatible with this op system so I kept the old pc and plan to use it for autocad only. When I tried to boot the old pc, the following message appears: "Windows has not start because the following file is missing or corrupted: [Windows root]\system32\hal.dll.» Any have a solution outside shoot the operator?

  Hi DickBernhardt,

  These articles may help:

  How to fix System32 Hal.dll:

  http://www.ehow.com/how_6184909_fix-System32-HAL-DLL.html

  How to perform a repair of Windows XP Installation:

  http://pcsupport.about.com/od/OperatingSystems/SS/instxprepair1.htm

  How to restore Hal.dll from the Windows XP CD:

  http://pcsupport.about.com/od/fixtheproblem/HT/restorehaldll.htm

  I hope this helps.

• black screen that says missing or corrupted file windows root\system32\hal.dll

  Original title: Media Center m470n

  I have a Media Center m470n. On startup, I get a black screen that says file missing or corrupt

  (windows root\system32\hal.dll). How can I fix? I have 10 disc that came with the system, what steps should I take just reload this file thanks

  Hi Albt,

  Do you remember any changes made on your computer before the show?

  What is the service pack installed on your computer?

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have this message on my desk: < root windows > \system32\hal.dll.

  original title: a little too technical for me this answer...

  I have this message on my desk:\system32\hal.dll.

  But according to the ansver on the support line, it is too technical for me, I put the CD rom and pressing the "F2" on the keyboard it lead me to a blue page with 3 columns, vertical on the left side with a menu to select with: System, readers, devices on board, video... so onon the system one I tried the boot sequence but get stock there.

  I don't know if I took the right track!

  Can anyone help please?

  WINDOWS COULD NOT FIND START BECAUSE THE FILE IS MISSING OR DAMAGED
  WINDOWS ROOT>\SYSTEM32\hal.dll

  This message is rather misleading.  It happens because the boot.ini file that tells where to look for 'Windows' boot is damaged, so it is looking for the files in the right place - hal.dll is be the first person he's looking for. Set the BIOS to boot CD before the hard drive.  Start the XP CD and at the installation site, take the immediate R for repair.  Assume that any requested password is empty.

  At the command prompt, type:

  H r s C:\boot.ini attrib [press Enter]
  DEL C:\boot.ini [press Enter] [to remove the bad]
  BootCfg /Rebuild [press Enter] [to search an installations of Windows, and make a new one]

  Remove the XP CD and hopefully restart Windows. MS - MVP - Elephant Boy computers - don't panic!

• Windows XP does not start because < root Windows > \system32\hal.dll file is corrupted

  I get the following error message when starting my windows XP Home PC. : Windows didn't start because the following file is missing or damaged

  \System32\hal.dll. Please reinstall a copy of the file. How do I do that?

  This could be the result of a corrupt / missing hal.dll file or boot.ini file. You have your windows disc? If so, follow the instructions below. If you do not have your windows disk click HERE to create a disc of windows recovery console.

  1. Use the Windows XP CD to start your computer.
  2. When you receive the message to press R to repair Windows by using the Recovery Console, press the R key.
  3. Select the Windows installation that you want, and then type the administrator password when you are prompted.
  4. Type bootcfg/Rebuild, and then press ENTER.
  5. When the Windows installation is located, the following instructions are displayed:
     Add installation to boot list? (Yes/no/all)
     [Type Y in response to this message.]

     Enter load identifier:
     [This is the name of the operating system. Type Windows XP Professional or Windows XP Home Edition].

     Enter operating system load options:
     Leave this field blank, and then press ENTER.

     After completing the previous steps, restart the computer, and then select the first item in the start menu. This should allow Windows XP to start normally.

     After Windows XP is successfully loaded, the Boot.ini file can be modified to remove the incorrect entry.

• I think I got a virus on xp family, I did a restore of system f10 and he said: I need a windows disk < root Windows > \system32\hal.dll. disc. Where can I find it?

  my computer is not let me finish my system recovery it says windows does not start because the followingfile is missing or damaged \system32\hal.dll. of and re - install a copy of it

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Start your computer in last good known Configuration.

  Using the last good known Configuration.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If the computer cannot start in the last known good Configuration, try to start the computer in safe mode.

  Step 1:

  Start your computer in safe mode...

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:

  If the computer works fine in safe mode, restore the system to a system restore point when the computer was working fine.

  How to restore Windows XP to a previous state.

  http://support.Microsoft.com/kb/306084

  Note: Undo system restore does not work when the system restore is called safe mode.