Boot my PC, I get a black screen that says ultra dma mode-6 s.m.a.r.t capable.

Similar Questions

• When I turn on my computer, I get a black screen that says "NTLDR is missing" or "NTLDR is compressed".

  original title: NTLDR missing/Tablet

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  See https://www.google.com.au/search?sourceid=navclient&aq=0&oq=NTLDR&ie=UTF-8&rlz=1T4IRFE_enAU448&q=ntldr+is+missing&gs_upl=0l0l0l12905lllllllllll0&aqi=g4&pbx=1

• black screen that says missing or corrupted file windows root\system32\hal.dll

  Original title: Media Center m470n

  I have a Media Center m470n. On startup, I get a black screen that says file missing or corrupt

  (windows root\system32\hal.dll). How can I fix? I have 10 disc that came with the system, what steps should I take just reload this file thanks

  Hi Albt,

  Do you remember any changes made on your computer before the show?

  What is the service pack installed on your computer?

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• get a blue screen that says stop techanical questions

  While online, I get a blue screen that say, there are technical issues and windows shutting down to avoid damage my computer. I don't know what are the issues?

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes to your computer?

  3. does this problem occur while you were online?

  Method 01:

  I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 02:

  I suggest you follow the link and check.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  I also suggest you follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip

  DAG

  These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.

  If you continue to plant I remove Symantec and use the built in Defender

• When I try to print PDF documents, I forst get a little screen that says that the document cannot be printed, then a small screenthat says no pages have been selected.  I can't even print the entire document.

  When I try to print two important documents, I first get a little screen that says that the document cannot be printed, then a second small screen that says no pages have been selected.

  Hi oldrealist,

  Try the following: open Adobe Reader | Change | Preferences

  • under Documents, change "Show the documents in PDF/A mode" Never.
  • under (enhanced) protection, clear the Safe_mode at startup.

  Let me know how it goes.

  Kind regards

  Nicos

• I'm working with Acrobat XI and when I try to add text to the geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?

  I'm working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?

  I thought about it... need to use the defined comment tool, not the set of editing tools.

• I can't see the music on my iphone after the recent OS update. All I get is a screen that says music

  iPhone version 9.2.1 6 s more
  All I get is a screen that shows the music.

  Double click on the home button and drag the application to the top music. Then hold down the sleep/wake and the "home" button until the Apple logo appears. -AJ

• When I turn on my computer with windows xp on it I get a blue screen that says dumping physical memory

  When I turn on my desktop computer with windows xp on it I get a blue screen telling me that it is dumping physical memory.  Why it does this and what I can do to fix the problem?

  Hi KarenSellers,
   
   
  -What is the exact and complete verbatim of the error message that you receive? Thanks for mentioning the same thing with the error code that is displayed with the blue screen.
   

  Method 1: Try to start your computer in Mode safe mode and check if Windows loads successfully.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Check out this link to do the same thing:

  A description of the options to start in Windows XP Mode

  Method 2: Use the Windows Memory Diagnostic tool to check if there is an error with the memory.
   
  Refer to the section "using the Windows Memory Diagnostic tool" from the link given below for the same:
   
  How to troubleshoot the facilities of RAM

• My system crashed and now I just get the blue screen that says to reinstall windows, when I try to use my recovery disks that it won't work.

  Is there anywhere to get a new copy of the system recovery disc for my windows vista computer.  I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows.  The recovery discs that I burned when I bought the computer do not work.  What are my options?

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  With HP normally press you F11 at startup to start the process of recovery from the recovery partition

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  If the problem persists with the recovery process, contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  or try HP support froums

  http://h30434.www3.HP.com/

• Help with Vista Home Premium. PC does not START after power went out. I tried to reinstall the CD without success, I can get to the screen that says "keyboard failure".

  I turn on my PC after a power failure and a black as BACKdisplay of KEYBOARD FAILURE.the USB ports have the power, the keyboard works, but I can't seem to BOOT without a keyboard menu. If anyone has any idea I'd be grateful! Stu

  reply in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1e228424-E520-4ec5-AF99-252a6e645f75/
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I try to install Windows XP Professional on my laptop, I get a blue screen that says "error(C=0000135) found dll gdi32not.

  install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  original title: I install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  Hi Vytautassvitojus,

  ·         The computer have any OS installed?

  ·         Are you able to boot to the desktop?

  If you are not able to boot to the desktop and then remove the external devices except the keyboard and mouse, perform a chkdsk from the recovery console and then try to install Windows.

  To run chkdsk from the Windows Recovery console. You can check the links for a description of the Windows XP Recovery Console

  http://support.Microsoft.com/kb/314058

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  I hope this helps.

• I turned on my computer today and it has a black screen that says "no operating system"

  It should work I put in a backup CD, and it does not recognize. And when I try to type it don't beep loudly. Help, please!

  It seems that you need a professional, the reputable repair shop to take a look.  Many things to default, little ability to solve problems.

• Whenever I reboot, I get a black screen saying Windows Vista running chkdsk

  After 10 attempt, I finally got vista on my laptop, I did a clean install, it crashes and I can not all service packs to install, its crashing, freezing,.., not all the time, but yesterday, he froze, I restarted and a black screen that says vista windows under what he said his running a disk check, he said check the markings then correct the error in the $I30 for file 38305 index, then a list of orphaned files jumped upwards, in the end, he fixed the usn journal,... .i had 2 restart it and again, chkdsk jumped upward, and this time he said correction error in $I30 file index 48879, 38305 once again, 71443, 111191, 114431, saying all the orphaned files then insert attribute data in file directory & framework... but vista starts normally after that, but the programs windows quits working or freezes only half of the updates install successfully, I can't get a service pack to install at all... ive even tried the vista OS disc, says the same,... idk what 2 more, do... Please help... thank you...    If you would like more information, let me know,... its a toshiba satellite A205-S58303...

  Hello

  I suggest you to refer to this link and check if it helps:

  Method 1:

  Start the computer in safe mode and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 2:

  Try to run the Startup Repair and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  It will be useful.

• Get the black screen at boot: status: 0xc000000f

  Original title: status: 0xc000000f

  I get a black screen when I turn on my laptop (Windows Boot Manager)

  Windows could not start.  A recent hardware or software change might be the cause.  To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  I followed all the instructions and still it will not read the installation disc.

  I put in the disk and restart the computer, but it brings back me to the same black screen.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or damaged.

  Can someone help me with this question to where it will read the disc. or what I am doing wrong?

  I got Appreciate your help :)

  Ok.

  You can watch the image here - is your BIOS looks in this picture:

  https://SkyDrive.live.com/#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21177

  If so you can try everything first:

  (1) turn on (or restart) your office

  (2) press on instead of - you should see "Start menu", where you must select "Drive of CD-ROM.

  If does not work (this means no "Boot menu" only appeared), then you need to change "Boot Device Priority" - go into the SETUP (   course of priming of the desktop), use the right arrow to select 'Boot' (upper image) - use the down arrow to select "Boot Device Priority" and press enter - you should see something as shown in the photo at the bottom.

  Now choose "Drive of CD-ROM" (arrow down) and by using the key + or - move the first CD-ROM drive. Press on (save & exit).

  Use this DVD:

  1. MICROSOFT WINDOWS VISTA HOME PREMIUM SP1 X 86

  LC