Black ZTE 10 Usb boot

Similar Questions

• Creating a USB boot for el capitan

  Hello together,

  my macbook pro does´t work longer. The monitor during startup is gray and it does´t boot correctly. I wanted to create a USB boot with my mac and followed the instructions on the apple site. I wrote it in the terminal:

  sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume of 16 Volumes/STICKI-applicationpath/Applications/Install\ OS\ El\ Capitan.app X\

  STICKI 16 is the name of the usb key. Then I got the comment, I should check my device twice. It is possible, I have stop my Mac. I have Don t need of such a catastrophe. It s worse enough, that my macbook pro pro is down.

  Now I m uncertained.

  Here my question: do you have someone proceeded as above written successfully? Is there someone who has a good advice for me in this case?

  Sorry for my bad English, I left school 40 years ago.

  Thank´s for the good answers and greetings form Germany.

  Ralf Jacob

  These are the instructions I used:

  http://osxdaily.com/2015/09/30/create-OS-x-El-Capitan-boot-install-drive/

  Ciao.

• Satellite T135D-S1324 - no support for USB boot

  Hello.

  I buy this model (TOSHIBA SATELLITE T135D-S1324), I am a linux user, this model comes with ligthscribe player, I want install ubuntu on USB but to my surprise I discovered that there is no option for USB boot in the BIOS config.

  Anyone know of a solution for this problem?

  There's a kind of an UPDATE of the BIOS to activate the USB BOOT?

  Thank you.

  Post edited by: idposada

  Hello

  Usb drive before plug to turn your laptop and the Bios must recognize.

• Modem ZTE MF622 USB and a Portege R500

  I have problems with a modem to broadband ZTE MF622 USB of '3 '. The modem installed self as advertised but my Portege R 500 reports 'USB modem not detected.

  The modem works fine on my old laptop. There seems to be some software incompatibility problems mentioned in various forums, but so far I have not found what causes the problem on my machine.

  Ideas or suggestions please?

  In my opinion, it is not Toshiba related question, and if you know that there are some compatibility issues, you must contact the manufacturer and ask for help. They should have enough experience with own products.

  Have you tried to contact their support?

• HP EliteBook 820 G3: HP EliteBook 820 G3 - no USB Boot

  Hello

  I have a HP EliteBook 820 G3 which was working fine a few days ago and now I can't boot from a USB key.

  I put the USB Boot BIOS and any type of USB, I try and no matter what USB Port I try I can not show USB boot F9 option menu.

  The stick, I'm trying to start is a stick of SCCM Boot to BIOS devices (non-uefi).

  I tried a fomatted UEFI, one to make sure that it was not the problem and it made no difference.

  In my cube, I have a ton of HP hardware and all begin this exact stick even without problem.

  But even if the stick did not form correctly it should still show USB as an option in the Menu start with the BIOS configured to boot from it.

  I have reset the BIOS settings, I disabled the USB Boot box then restarted and places back.

  I have flashed the BIOS to the latest version and that made no difference.

  When the machine starts the operating system correctly shows the contents of the flash player.

  Anyone have any ideas?

  Thanks in advance!

  False problem.

  A factory more reset BIOS seems to have understood that it works.

• Still no monitor temperature and no USB boot support

  Hello
  Many users of Toshiba laptops I am disappointed because no CPU temperature monitoring utility, none support USB booting is provided for my laptop.
  It is ridiculous that there is no utility that shows the temperature, the speed of the processor or the functioning of the fan.

  Is there any solutions for this?

  Hello

  1.) If you want to boot form USB you use the floppy drive.
  2.) pre-installed Toshiba Software are responsible for the processor and the cooling performance module.
  Open energy saver, and there you can change some settings. (CPU processing speed, the method of the cooling module)
  3.) Unfortunately, this software does not support any temperature followed :(

• Qosmio F10: USB-Boot necessary.

  Hi all

  I have a Toshiba Qosmio F10 series.
  I need the ability to boot from a usb key.

  As toshiba BIOS does not offer a USB boot option, I would like to ask if anyone knows a
  how it will be possible.

  Thanks in advance to all!

  Hello

  Unfortunately, this is not possible. You cannot boot from the Flash DRIVE or USB HDD.
  You can start only from:
  STRANGE machines FDD USB, HARD primary disk, Network (LAN)

  concerning

• IdeaCentre 300 Linux USB boot Stick

  I want to install linux (OS Zorin or MATE Ubuntu) on my new ideacentre Stick, but there is no USB boot option in the boot options. In the BIOS, there is an option 'Boot from File', but I can't understand how to use it. I'll attach pictures of the start menu and startup in the file menu. Secure boot is off.

  http://imgur.com/a/iBdgf

  Hello

  In fact, if you have the directory structure appropriate for EFI boot on your USB (EFI/BOOT/bootia32.efi) it will allow you to boot from USB after pessing ESC at startup and selecting boot options. Even you can get the "boot from file" option, when you select the USB device and look for the EFI boot file manually.

  I just managed to install Ubuntu Linux (15.10) to the Ideacenter Stick 300 device, so if you need, I can provide some tips, how :-)

  Akos

• Satellite L675-S7052 - available USB boot option?

  Hi guys,.

  my friend just bought new laptop of the United States (satellite L675-7052), and he would like to install Windows 7 from USB. Her BIOS is FRIEND v1.4. Legacy USB is enabled in BIOS but the USB boot option does not always appear in the start menu.
  Anyone have a solution for this BIOS (laptop model), please? He sent me a few screenshots as well:

  [http://www.pixhost.org/show/1907/5070022_dsc_8298.jpg]
  [http://www.pixhost.org/show/1907/5070029_dsc_8299.jpg]
  [http://www.pixhost.org/show/1907/5070036_dsc_8300.jpg]
  [http://www.pixhost.org/show/1907/5070049_dsc_8301.jpg]
  [http://www.pixhost.org/show/1907/5070057_dsc_8302.jpg]
  [http://www.pixhost.org/show/1907/5070063_dsc_8303.jpg]

  Thx for any answer :)

  Hey,.

  Why you want to install Windows 7 from the HARD drive?
  Windows 7, you can only buy on CD/DVD, never heard of any version of HARD drive

  In any case, I think that boot USB is not available. According to the Toshiba page you can start following devices:
  USB FLOPPY DRIVE,
  HARD drive primary.
  Optical devices,
  Network (LAN)

  It seems therefore that boot from USB HDD is not possible.

• USB boot option just don't not using uefi

  I am trying to install windows 7 64 bit. my hard disk partition type is TPG. But Usb boot option does not come in UEFI boot mode.

  If I choose the start for Legecy support option, then the usb option comes, but I want to install win 7 64 bit in the uefi.

  I have already created the USB bootable in uefi gpt mode by using diskpart as mentioned in other topics. Also tried with rufus.

  BIOS settings:

  G50 Lenovo 70

  Safe boot: disabled

  Start mode: uefi

  Quick start: disabled

  Boot USB: enabled

  Operating system optimized defults: other os.

  Format hard drive: TPG

  When I boot, only option "EFI PXE Network" comes. Not boot from usb option

  Help, please

  Thank you

  
  

• No USB boot option?

  Hmm. It seems that I don't have a usb on the Y580 boot option?

  Oh nevermind.

  It has a usb boot option.

• SHIFT key to black silk Lenovo USB keyboard does not

  Original title: black silk Lenovo USB Keyboard

  Shift key does not work all of the time, so when he's not working, I can't type E-mail addresses (ampersand) or? and!.  It works now, but it wasn't a few minutes ago.   What is causing its functioning?

  problem started a few weeks ago.  I have windows 7. system drivers are up to date. keyboard is still under warranty, so I think I'll just replace it.  Thanks anyway for your help.

• Dashboard SSD 1.4.2 has no option to create the USB boot disk

  IM using the Dashboard SSD 1.4.2 and im wanting to clean up a Sandisk SSD Plus 120 GB SSD.

  However when I click on the page of disinfection, it does give me not an option to create the startup disk USB (despite what the documentation says)?

  Im running Windows Pro 64-bit 10, if that helps.

  Thanks much :))

  I installed the Dashboard of SSD 1.4.2 on some other PC with Windows 7 Enterprise 32-bit and 64-bit.

  and the option to create USB boot disk displays and works perfectly!

• How to use "System Restore" using the USB boot-able.

  Some updates are being installed and I have turned off, now Vista does not load normally. Instead, Windows loading process is interrupted by error 'blue screen of death '.  Now, I have a USB boot-able with Windows Vista Home Premium 32-bit. When I boot with my USB boot-able and select 'Repair your system', it shows the dialog box 'System Restore Options. " There are no BONES in the list, so I click on "Load drivers", an "Open" dialog box appears.

  1. in the "Open" dialog box, I don't know which file (s) to locate.

  If I cancel and click on 'Next', another windows appears. Then, I select "System Restore". A message pops up saying something like: «to perform an offline system restore, you must specify which Windows installation you want to restore...» For example, enter the command:
  Rstrui.exe /OFFLINE:C:WINDOWS.

  2. I don't know where I have to give this command.

  My HP dv6700 s system. When I bought it, Windows Vista Home Premium 32-bit was already installed. But I do not remember the activation code now. And so I can't even contact support and help from microsoft.

  Kindly help me.

  HP gives you the opportunity to make the Vista startup repair from the diagnostic menu? I thought that this was the case. Have you checked? There is a reason for the message warning about don't turn off your computer while updates are being installed and you may need to restore the State of the plant.

  To answer your original question, the drivers that are sought are disk SATA controller drivers. You get them from HP website and set on a (non-bootable) USB to use at the point of "pilots charge."

  If you can not solve this problem, you can copy your data to an external hard drive by booting with a Linux Live like Knoppix or Ubuntu distro from a bootable USB. Then restore the computer as long as the plant. HPs factory to start the recovery process by pressing F11 when the computer starts, but there will be a message about what function key to use.

  http://www.pendrivelinux.com
  http://www.Knoppix.NET

  MS - MVP - Elephant Boy computers - don't panic!

• I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers.

  * Original title: drivers

  I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers. help please?

  What drivers?

  Your hardware such as a video card may require pilots. Only you know what is in your version of the computer.