BlackBerry 10 did I brick my BB Q10? I've updated with Knowyou 10.2.2.932

Similar Questions

• Software BlackBerry Backup did not complete

  Dear all,

  I have a blackberry z10 and I can't use the LINK to the support! I use USB, and when I backup forgetting I get the following error messages:

  Backup did not complete

  It could be a problem with the device or the connection during backup. Check that the device is turned on and connected.

  I'm under 64-bit Windows 8

  Help, please

  Yasser

  OK, I got an update from Blackberry OS 10 (10.0.10.82)

  The backup is now find work.

• My camera blackBerry smartphones did not when it is connected to my computer

  I had used my computer from time to time to charge my blackberry, this morning, I unplugged and tried to turn it on with no luck. The drums out and I tried again without a bit of luck. Put it on the charger and the battery with a slash symbol showed on the screen. Any ideas on what's happened.

  stltrains wrote:
  Any ideas on what's happened.

  The battery is dead. Free of charge.

  Leave the appliance to charge 2-3 hours and then, always toujours relie connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  If it does not start - try using a wall charger if you're not. If you are connected via USB to the computer, make sure that you have Desktop Manager (or USB device drivers), you can download it below.

  Make sure that your USB cable is connected to one of the main rear USB ports of the PC. A USB hub, or USB Monitor port not a USB port on the front of the PC.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can canone help?

  I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can anyone help?

  Thank you
  Joseph

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• BlackBerry why 10 are two different different such Z10 hourly updated?

  My wife and I have of the Z10. I had 2 or 3 updated Software Release in time she had none. The only difference between the two of the Z10, it's that I bought mine on Blackberry store, while his was purchased via his provider (Wind Mobile to the Canada). I just received my latest SR update today, 10.3.2.2226, while she is always on 10.3.1.1779. I checked its software updates and says it get a new update and it found nothing.

  Now, even though his phone was bought by the wind, it has been unlocked, so it's pretty much identical to mine in terms of features.

  Official OS versions to the devices of brands are controlled by carriers. Looks like yours is not stigmatized. Versions of OS for the BlackBerry and Amazon shop without brand, purchased models receive OS updates at the discretion of BlackBerry and without control of the carrier.

• BlackBerry Smartphones error 200 + white screen due to the software update incomplete

  Hello.

  I was updating my Blackberry device software but I don't know if the update was successful or not, but it seemed to be the error because the data cable was leaked & he says I should go to www.blackberry.com/507.

  Then he handed over by itself, but it showed the error 200 with white screen behind. I have tried resetting clicked & remove the battery then re-inserted, but kept it appears error 200.

  Please help me, what should I do?

  Data cable was leaked?  Whatever that means, correct it or don't do it again and then reinstall or upgrade the operating system.  The following link should be helpful.

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...

• Update blackBerry Smartphones BB SW BRICKED my daughter is curved!

  Hello

  I'm new to these forums and the BlackBerry, having had my 8310 for a few months only (by my company). However, my daughter had her Curve 8310 since last March, and she has had intermittent problems with it. It was replaced under warranty by AT & T twice.

  This last time, she discovered that the sounds had ceased - his alarm did nothing when it exploded. The sounds later mysteriously returned, but she decided that it was the last straw. She wanted to bring her back to the AT & T warranty Center to replace again, but I suggested that she first attempts to put his system. My theory was, since the new software has been released, it would be wise to upgrade. My phone company has been upgraded (OTA) without any problem, so I thought (silly me) it would be just as easy to make the curve of my daughter.

  The first thing I did was to go to his screen Options Options / Advanced to make a wireless upgrade. However, this option was not available on this screen. Weird, I thought - his phone and mine are the same, and mine had the option of upgrade wireless. So I'm on these forums and sought assistance and find the sticky at the top of the forum on the upgrade of the 4.5 software. I followed the link to the BlackBerry page which contained the AT & T software download (ensuring that I chose the multilingual version of AT & T in 4.5.0.182). I downloaded this version, but before he wanted to use BlackBerry Desktop Manager instead. It has dutifully reported that his curve needed a software upgrade to 4.5.0.182, so I decided to try the upgrade via the USB connection. When he got to the point where he had saved his phone and was willing to make the backup of the system before wiping, the connection broke. Don't know why - I used the USB cable provided by BB. Thus, the upgrade didn't happen like that.

  The next thing I did was to launch the download of AT & T that I had recovered from the BB link. He dutifully installed the last BB Desktop Manager (5.0.1, I think), then when I hung his curve up to the computer it once more pointed out that she needed a software upgrade. I chose to do the upgrade, and it went through the process again, save the curve on my computer and is about to wipe. This time, he was once again broken the connection, but when I selected 'Retry' he seemed to proceed as usual, erasing the device to upgrade.

  The fun starts now. When the real upgrade began, that the unit broke out to establish the connection. Again, I got the dialog with the boxes 'Retry' and 'Cancel' box and click 'Retry '. But when I did the screen on the curve went blank and revealed an icon that I can only assume means, "No operating system only," as well as the small number of '507' below. The BB Desktop Manager seemed to be to attempt to upgrade the software, but after leaving it setting like that all night there is no change in the status. So it's well and truly bricked.

  Now, my question is, what is my recourse? Is there a possible way to recover this device (because the computer does not recognize it via USB connection)? Should I just take it back to AT & T and have them replaced (again)? And the backup I did last night will be restorable at the new BB (assuming they give her another curve)?

  I hope to have answers quickly enough, because I'll be able to hear the rash of here when she discovers that his curve is a paperweight. Thanks in advance for your help and your availability for BlackBerry users.

  Don't worry, it's not a paperweight. MOST likely, the previous upgrade process constituted a return of the device before the upgrade failed. It's probably, there are some third party faulty or theme application that "perhaps" do the upgrade fails.

  Well, error 507 means simply that no operating system is found.

  First of all, you have the full OS file downloaded on your PC?

  Do that first.

  Second, make sure that your USB cable is connected to the main REAR usb port. No USB hub port or before.

  At the present time, unplug the USB from the BlackBerry, power down to turn off and restart your PC.

  Meanwhile, do a reset on the BlackBerry > with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  Once the two are back running, confirm that Desktop Manager is NOT loaded or running on your PC.

  Follow these instructions below:

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  IF you succeed step by step: you will not need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

• BlackBerry Q10 I need help with my BlackBerry

  What is the point of a BlackBerry backup if your phone will not work after? My BlackBerry broke and I got a new same model one and all. I did not put in place the new BlackBerry so I had a backup and I restored the backup to the phone. All installed and working, but not Android applications run the Android runtime does not work. Anyway to fix this without restoring my BlackBerry?

  Hello

  Your data, it is very difficult to answer. What I would say is a test - reload your OS and/or WIPE your device, and then try the Android apps and see if they work. If they do, then restore your backup, and then try again. If then they fail then do everything new but less your backup... restore leave out the Application data or something similar to what can be contained in the Runtime Android corrupt.

  Good luck and let us know!

• Q10 blackBerry problem transfer contacts from Gmail to Q10

  First I tried to use the "peripheral" app switch, and I tried to transfer contacts and the calendar of a Samsung S3 to the Q10 - does not work, nothing has been recorded.

  Then I tried to manually enter some contact entries, and that no longer works (you press "save", but it is not saved).

  Email gmail works fine, great syncs and everything, but NO contacts list available.

  Very frustrating. If big names like Gmail and Blackberry OS 10 cannot talk to each other, what the heck!

  (I should mention that all OS updates have been made, it is perfectly up to date)

  any help and advice would be much appreciated.

  Wolf359 says:

  Hey watch this:

  How to configure Gmail on your BlackBerry 10 device using IMAP, CalDav and CardDav

  http://CrackBerry.com/how-Setup-Gmail-your-BlackBerry-10-DEVCE-using-IMAP-CalDAV-and-CardDAV

  I use it and everything works great.

  I have three entries in my gmail account.  Calendar, Contacts, Email.

  Thanks for the link,

  had to get some "app-passwords' before trying the procedure, but could not work... will try again later at home.

  using Gmail 2-step of verification? (I'm)

• BlackBerry Q10 Q10 SQN - 3 problem with sms!

  Hello bb,.

  Dear bb, I need your help... I have problem with Deliver text messages

  When I will write an SMS so no problem post but does not...

  -with my service provider is not a problem (Slovak telekom)

  -with the other service provider where to send a text message is not a problem (O2, Slovakia)

  -J' have test give my SIM card to another phone with android and there isn´t system no problem (Sony Xperia mini pro)

  Problems is the only software in my Q10 I know that 100%. When I use original the last 10.3.1.1779 link bb os so I have this problem with sms, but when I give for example the version 10.2.1.3175 of the software from this page: http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using... so my problem is solved. In my mobile is all good, the sim card is unlocked and registered by the blacberry services...

  Can you help me pls bb, I want to use os 10.3 because is very fast and pleasant

  Thank you

  First of all, there is no "official" AutoLoaders Automatic chargers are 100% unofficial methodology... but (with the exception of the ' leaks') they are built from the officially released OS components. Therefore, as long as the creator of the autoloader is a) reliable and b) is not an error (be gentle, because they are human too), then the autoloader should be quite safe.

  Here's a great archive (IMHO) of automatic Chargers:

  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  The link at the top of the first post of this thread is a great repository of Autoloaders... and the source is one that I consider to be very reliable.

  Good luck!

• BlackBerry software link does not not wireless Q10

  I use Q10 BB with the link 1.1.037

  Everything worked perfectly - syching wireless

  Now, it's all stopped - when I plug BBery via USB cable - all the content is there, but when I unplug the device, it shows as a device not connected and I can't link to talk to him in the absence of the cable is connected...

  I tried refreshing, withdrawal of device, restart the PC...

  any ideas?

  Hey marcus_anselm,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  Just to clarify, you are doing a Wi - Fi sync with your support?  Or a Bluetooth sync with your contacts or calendar?

  I look forward to your reply.

  See you soon.

• Updated blackBerry 10 10.3.1 OS for Q10 purchased from EPP

  Hello

  I am a former employee of BlackBerry and use a Q10 on the Rogers network I bought the EPP. I have not yet received the update of the OS.

  Is there something special to do to get the update for devices of the EPP?

  Thank you

  Sylvain

  Then Knowyou or autoloader. There may be a way to get your PIN on a list, or perhaps it should be on a list, but for a copyist's fault. I have not the slightest idea of who. But you could run updated tonight if you go the unofficial road.

• BlackBerry® 10 Apple email on my new Q10

  Hi all

  I have a really important question for you all.

  I bought a bb q10.

  my last phone was an iphone.

  now, I have the problem, is my email account in the apple icloud.

  I have a mail like * @me. com

  Anyone know how to configure this email to my new q 10 account?

  is this possible?

  Thanks for all replies bros and girls

  kind regars

  Andy

  Hello and welcome to the community!

  Here's a knockout who explains that:

  • KB33812 How to integrate iCloud contact, calendar or on the smartphone BlackBerry 10 e-mail accounts

  I hope that it contains something useful! There are also several existing threads on this site that deal with the exact situation... your opinion of those who may be useful, that a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• Update (a.148) blackBerry Smartphones failed halfway brick-phone

  I did research on the recovery of a brick of the failure of an attempt to upgrade phone for my storm, but I can't find something that actually works. Any help would be greatly appreciated.

  Just found out that there is a problem of major compatibility and Windows 7 Beta. I switched in my XP box and everything was fine, it worked like a charm. Thank you.

• BlackBerry 10 more stable 10.3.1 for Q10 with Knowyou updated version?

  I have not received the update for my SQN100 Q10-5 and I want to load it using Knowyou. I've not used it before and I want to be sure I'm loading the correct version. When I plug in the phone, Knowyou shows me this:

  Update available for SQW 100-1 10.3.0.908!
  OS: 10.3.0.1418 Radio: 10.3.0.1419

  A user told me that his Q10 works best on the version 1052 of the operating system - the best for life (one of the benefits of the update 10.3) performance and battery life.

  I am currently under the 10.2.1.something, and Orange Romania (my network) told me that I should have received the update for my version (the -5 international unlocked one).

  After that any operating system set to level on a BB10 device, it will take 48-72 hours for the synchronization of data from device to e-mail, contacts, social applications, etc., fill and finish. Data transfer high after a CPU usage high cause upgrade, which in turn causes high battery usage. Similarly, high CPU usage will cause some lag and initial slow. Ignore and and be patient. It may take 48 hours for all contacts to synchronize to the device. And, the battery will recover after a few days. Just don't drain your battery to 10% or less each time, superior to the load. You will notice a difference after a few days.