BlackBerry 10 functions and characteristics of strange behavior when sending messages/text

Similar Questions

• Strange behavior when duplicating a text layer

  Hi all

  I followed a tutorial.

  I created a text layer.  typed in the number '2012' in white

  I placed a texture in the model.

  I used the text as an alpha matte layer

  Then I duplicated the text layer, and instead of the layer being called 2012, it is automatically changed to 2013.

  When I look at this as the layer name or Source name is the same '2013 '.

  So, I create a new text layer and type '0' and the layer was appropiately named 0

  But when I've duplicated this layer, it was named 2014

  When I duplicated all the text layers, he was appointed the next higher sequencially number

  This name change model has been broken only by typing a number when the first figure was anther value place i.e. 4329

  Then duplicating a text layer would begin to appoint the with this value plus 1.

  Same thing if you separate the text layer

  I think it's a bug or bad programming.  This can lead to unnecessary confusion if you are working on a draft text number of layers and must duplicate many of them, or several times.  Or is the answer to the front to compose the text before the duplicate layer - NO one who has his own shotcomings.

  On a Mac Os 10.6.8 CS5.5

  I found a solution.   Rename the text layer by adding space before or after the digits.  Now duplicates are named as the text written with a + 1 suffix to each additional duplicate layer.

• Strange behavior when writing messages.

  Internet Explore or Mozilla close unexpectedly without an error report after that when we try to write posts on different sites, hotmail, same here! Especially when I copy or paste text. Notepad closes as well sometimes. Also happened on a bank site. All in my computer is up to date.

  OK, I answer myself! I had to use Spybot Search Destroy & to detect some malware, Trojans... all is well now. The usual anti-virus program could not detect these everything first.

• Java Fx: strange behavior when trying to write a vertical label

  I've noticed some strange behavior on the rotated texts (Label,...) in JavaFx...

  Originally, I just wanted to be able to display labels vertically in a GridPane. The first problem is that there is no simple way to indicate a label to display its content in one direction and given orientation. It would be nice to have something like the property on the side of the tabPane allowing to easily turn the text...

  In any case, I quit then myself to use the rotation function to turn my Label. It's when the strange thing began to happen... I put my label in a cell of the grid that is not large enough to display the full text if it is not turned, but the text must be able to adapt rotated once. The problem is that the text appears wrapped even when it is turned as if packaging test have been done until the text is actually shot... The problem can be seen on this screenshot http://hpics.li/e210f2f : the text to be displayed is written in the ToolTip and we can see that only the first letter of the rotated text is displayed in the grid of the cell even if there is more than enough space to display all...

  Anyone has an idea on how to solve this? Is this the intended behavior or it's just a small bug?

  Thanks in advance for your answers.

  Another workaround solution seems to be to wrap the labels into groups and spin groups. If you don't have enough space in the grid, although bad things happen.

  import javafx.application.Application;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.Control;
  import javafx.scene.control.Label;
  import javafx.scene.layout.GridPane;
  import javafx.scene.layout.RowConstraints;
  import javafx.stage.Stage;
  
  public class RotatedLabelsInGrid extends Application {
  
    @Override
    public void start(Stage primaryStage) {
       final GridPane root = new GridPane();
       root.setHgap(5);
       root.setVgap(5);
  
       final String letters = "ABCDEF" ;
       final int numRows = 4  ;
  
       for (int col = 0; col < letters.length(); col++) {
           for (int row = 1; row <= numRows; row++) {
               Label label = new Label("Item "+letters.substring(col, col+1)+row);
               Group group = new Group();
               group.getChildren().add(label);
               group.setRotate(90);
               root.add(group, col, row-1);
           }
       }
  
       final RowConstraints rowConstraints = new RowConstraints(100, Control.USE_COMPUTED_SIZE, 200);
       for (int i=0; i		   

• Strange question when you descale text

  Hello

  I use inDesign CS6 and there is a strange problem when scaling a text with overflow to 200%:

  

  As you can see, the fourth paragraph does not change the size of the font, even if it has exactly the same configuration. This apparently happens randomly to some paragraphs, or lines in a paragraph in some cases.

  The strangest thing is that I tried the same operation with the same file .indd on other computers (another Mac and Windows, the two CS6) and it can successfully evolve all paragraphs. So I checked all the preferences from one computer to another, and even if they are identical, the scaling issue still happens.

  Any tips?

  See replace your preferences

• A message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.

  problem of pirate?

  We received a message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.  We have not so much text msging and then they want all sorts of personal information (name, DOB, address, e-mail addresses, etc.) and we do not want to do that.  is this a legitimate windows msg and is it possible that I can call someone from microsoft was finishing speaking?  Thank you.

  Hello

  That sounds like a SCAM don't respond so not! Unless you have launched the contact of its likely someone
  I'm trying in fact to steal your account and your identity. If your account has been compromised, see the
  below.

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• 6 editing and output view, strange behavior from previous versions of Captivate

  Hi all

  I worked with Captivate since version 4.

  I am now Captivate 6 new behaviors in editing and output.

  Very heavy and boring.

  You recogniye this behavior?

  Is there anything I can do to recover the good behavior of previous versions?

  What I do:

  1. Publish the project
  2. Filled with edition confirmed with dialogue, without the ability to display in the browser directly like in previous versions

  

  3. now, I need to navigate to the folder publishing where I find a ZIP file

  

  4. unzip the files in the folder

  5. click on the html file

  (6. the browser opens and there I get a message that Java script is missing, what is not) see second screen:

  

  7. I allow blocked content of IE on the bottom of the screen and then I get the following error message:

  

  8 and no matter if I press OK or cancel the project opens, loads, and can be accessed. BUT the OK project? The only diffence in the two options is that OK, I get an error log:

  How can I get an error and cumbertsome publihing inclined less with CP6? Any idea? Can I make some changes to prevent this behavior?

  Thanks in advance for your comments.

  Stephanie
  

  
  

  Check your settings in the dialog box post.

  In particular, check to see if your output Options checked Zip files.  Because the error message also talked about the impossibility to acquire the LMS API, this would indicate that you currently LMS Reporting turned on.  If you just publish locally at the moment, you can disable this Quiz preferences > Reporting.

• 2.1 RC1 - strange behavior when you change the data in the table

  I recently found a new strange behavior of the SQL Developer. On a small table or a table with a filter where all the data is loaded, but not all lines can be displayed on the screen, trying to change the data in the table. When I confirm the editing with the key enter, Developer SQL jumps always until the end of the data. Quite confusing and boring. The cursor seems to remain in the field that I have edited, then moving upward or downward line force SQL developer to this line.
  
  Appears not to be the case when all the data are loaded instead of punch, but if you force Developer SQL to load all the data, I can reproduce this strange behavior.
  
  Sven

  Bug 9205959 is fixed.

  -Rambeau

• Strange behavior when using Labview to collect data from Tektronix oscilloscope tds8200

  I hit a wall in trying to understand this one. The problem I have is that my application will not start the oscilloscope when it should.

  I use an oscilloscope Tektronix TDS8200. My goal is to collect data from the oscilloscope using Labview waveform. First of all, my program initializes and configures the oscilloscope; This part of the program works very well.

  The second part of the program begins the acquisition of data with the function 'Tktds8k Start or Stop Aquisitions.vi', which is to press the button run on the scope. The function "tktds8k to Waveform.vi" is used and should ideally return data, which I connected to a waveform playback graph.

  When I run my program, the first part runs without a problem, but as soon as the program comes to the service get the waveform, the run button in the scope, which is green when running, turns off; the program then expires, and no data is collected.

  Here is where it gets weird. I went through the debugging to try to understand this point, and I put breakpoints on the beginning and get shape wave functions so that I could scroll through the last part of the program. The program continues with the departure function, and the button run in scope is green. The breakpoint for the function get the waveform is reached and when I press on continue, turns the Run button and turns it off then back on almost immediately. data are collected, the waveform graph appears and the program ends without error.

  I thought that the timetable could be the problem, so I did the program wait as long as five seconds between the functions of start and get the waveform and that did not work. I also tried to move the start function to before the configuration functions and remove start completely; no method worked.

  is there any ideas on why, the program works when I enabled breakpoints and isn't when breakpoints are disabled? I'm sure there is an easy solution, but I was not able to find a solution.

  I have attached a pdf that contains information about the functions of the Oscilloscope (tktds8k.pdf), and I have also attached my program.

  
  

• Strange behavior of JMS Messages

  Hello
  
  I m using WL 9.2 with 2 JMS servers. Have 2 JMS Modules, one for each JMS server and I m sending messages to one of them (TestModule).
  This module is deployed across the cluster (in this case because I m test is deployed in my AdminServer).
  I m writes, in my test, 3 messages to this JNDI ' TestModule! TestDistQueue' (my module and my distributed queue).
  I ve created a queue browser to see what the hell is going on, and this is the strange thing, in a performance of the browser appears 2 messages, I run again the browser seems 1 message, run, 2 messages and if we... never 3 messages at the same time.
  The problem is when I use this message only 2 of them are consumed.
  
  I ve seen all and no clue what so ever what current...
  
  Someone has an idea to what was going on?
  
  see you soon

  It is not clear from your description, that you are trying to do, as typical applications use a single module, including those that use distributed destinations, and typical applications don't use the convention of specifying a module name in their JNDI name. (The "!" syntax makes me suspect that you do not use JNDI to research destinations, rather than using the JMS session call 'createQueue()' rarely recommended.).

  Never-the-less, I guess that the problem is simply that your use of a distributed queue and did not realize that the PIN line of browsers and the consumers themselves to a member of the single queue. To ensure complete coverage of a distributed queue, the best practice is to use a MDB WebLogic: WebLogic BMD automatically ensure that each Member of the queue has consumers.

  Furthermore, if you are using distributed queues, then the best practical config is as follows for each homogeneous set of JMS servers:

  -Configure a WL custom store per server, the default server migratable target target.

  -Configure a Server JMS by target the default server migratable target, server, set the store for the JMS server to be the same as the custom store.

  -Configure a single module JMS, target to the cluster.

  -Configure a unique subdeployment for the module referenced by each JMS server (and nothing else).

  -Configure one or more queues distributed for the module. Never use default targeting - use rather subdeployment advanced to target each distributed queue to the unique subdeployment you defined previously.

  -Configure one or more factories of custom in the module connection, use default targeting.

  I recommend reading through the admin JMS and guides of the programmer in the document if you did not already. You may find that the chapter of the new book "Professional Oracle WebLogic" JMS is useful.

  Tom

  Published by: falls on November 4, 2009 10:12

• BlackBerry 10 functions and features can not turn off my Blackberry Protect z10 after changing the password ID.

  My wife's phone was last updated the operating system more recent 10.3.2. I then tried to access a service and found when he asked for the Blackberry ID, we had forgotten the issue of password and user. Then I deleted the ID and set up a new. I can connect to the new identification, but he cannot confirm on the z10. Then I thought to wipe the z10 back to factory setting. However; the z10 shows that BB Protect is enabled and we cannot turn it off using the passwords that we try.

  I have logged on to the site of BB Protect and found there is no device associated with this Userid. Also, I find the screen for the current user ID name using our existing email address differs from the one showing on the screen z10 Blackberry ID. name I tried to change the screen name and password on the ID to be similar to the z10 site but it will not accept it.

  So now I'm unable to wipe the z10, or change the ID info to make it usable when required. I also noticed, online, there are instructions for the new OS 10.3.2 informing us that no wiping ability to Protect is disabled. There is no instructions on how to so that when a problem arises like mine.

  Help, please.

  I searched for a solution and I finally found one that works. It was posted by asokhay about a week ago and is as follows:

  "I found the solution!

  I connected my passport for Blackberry link and clicked on "back up and restore" in the left navigation tab. Then I clicked on Factory Reset. He asked me to unplug the unit and when I did the wipe of security has started to happen. "

  This works, however when I wipe the phone it took about 30 minutes. By reading this forum I found that some wipes can take several hours to complete depending on the amount of material is on the cell phone.  As I could not ' t register anything before this wipe I have to start over from the beginning. " Fortunately my wife added very little to the phone, such as applications or photos.

• Strange behavior when using units and controls the ring

  Hello

  Something unexpected occurs when you use a control of the ring with units:

  1. Create the control of the ring,
  2. change the representation of double
  3. display unit label,
  4. the value of mV as a unit,
  5. edit items
     1. disable the sequential values,
     2. Add an element with a value other than zero for example 123,
     3. Ok
  6. Select the value created,
  7. create a KPI DBL with V as unit,
  8. wire from the control to the indicator,
  9. run

  What I see in the indicator is 123 V instead of the expected 0,123 V

  You guys are able to reproduce this?

  Noticed on LabVIEW 2013 and 2014, 32 and 64 bit on Windows 7 and 8.1

  Thank you

  Boris

  Bring up the digital display of the command of the ring.  You will see the units you enter under edit items menu is indeed volts.  Any prefix to units only acts on the screen.

• BlackBerry 10 functions and features OS 10.3.2.2876 BUG... android applications do not uninstall

  Since the OTA update to the latest OS that pushed today, I am unable to uninstall Android applications. If you delete the app/uninstall since is the home screen or via monitor/storage device, and then confirm by Commander android app or ghost runtime settings, the app is still there.

  Many users on crackberry have the same problem on all BB10 devices since the update of the OS was pushed.

  Someone at - there a solution or is this a bug in the kernel of the operating system, as all the world reported on crackberry.

  Here is a link to one of the threads with multiple users having the same problem.

  http://forums.CrackBerry.com/Android-apps-Amazon-store-APK-files-F413/cobalts-official-Google-Apps-l...

  A workaround is to install the runtime Android 10.3.2.2813 and Knowyou.  Once the files are installed, you can delete apps normally.

  Link to files: mega: / / / #! 9JIhFIyJ! GYnFXMeLDn1mLPtE-3xOP36HzAyaxbjpSCZBeHP1ueQ

  Link to Knowyou: https://github.com/xsacha/Sachesi/releases/tag/2.0.2

• BlackBerry 10 functions and features of let's browser and encryption certificate?

  How can I get the browser to accept sites using certificates we will encrypt? I added CA of the certificates in the settings but still complains the browser.

  You've added DST Root CA X 3?