Strange behavior when writing messages.

Similar Questions

• BlackBerry 10 functions and characteristics of strange behavior when sending messages/text

  Feature: Passport

  OS: 10.3.2.2836

  Behavior:

  I noticed that some contacts/recipients did not of texts intended for them.

  I sent a test text to a contact. He replied stating that he had not received the text, but when I decided to send a reply message to it, he has been received!

  Is it possible to return to the default settngs to the Messages Settings\Text Hub? Maybe someone has encountered this and has a solution or could suggest a few things to check?

  ATTENTION: Interested readers.

  I think I discovered why some text messages have not been received.

  I noticed when I looked in question contact the House or fixed telephone number is first on the list (to use) and when I looked then the texts themselves, Contact was saying was the number sent.

  Test and conflicts (I hope)

  1 compound of SMS (to a contact who had not received any previous test)

  2. added to their name

  3. press on name and associated numbers appear (as a field in list dropdown/combo in Excel)

  4. Select the mobile phone number

  It's her! [HO]

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• Java Fx: strange behavior when trying to write a vertical label

  I've noticed some strange behavior on the rotated texts (Label,...) in JavaFx...

  Originally, I just wanted to be able to display labels vertically in a GridPane. The first problem is that there is no simple way to indicate a label to display its content in one direction and given orientation. It would be nice to have something like the property on the side of the tabPane allowing to easily turn the text...

  In any case, I quit then myself to use the rotation function to turn my Label. It's when the strange thing began to happen... I put my label in a cell of the grid that is not large enough to display the full text if it is not turned, but the text must be able to adapt rotated once. The problem is that the text appears wrapped even when it is turned as if packaging test have been done until the text is actually shot... The problem can be seen on this screenshot http://hpics.li/e210f2f : the text to be displayed is written in the ToolTip and we can see that only the first letter of the rotated text is displayed in the grid of the cell even if there is more than enough space to display all...

  Anyone has an idea on how to solve this? Is this the intended behavior or it's just a small bug?

  Thanks in advance for your answers.

  Another workaround solution seems to be to wrap the labels into groups and spin groups. If you don't have enough space in the grid, although bad things happen.

  import javafx.application.Application;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.Control;
  import javafx.scene.control.Label;
  import javafx.scene.layout.GridPane;
  import javafx.scene.layout.RowConstraints;
  import javafx.stage.Stage;
  
  public class RotatedLabelsInGrid extends Application {
  
    @Override
    public void start(Stage primaryStage) {
       final GridPane root = new GridPane();
       root.setHgap(5);
       root.setVgap(5);
  
       final String letters = "ABCDEF" ;
       final int numRows = 4  ;
  
       for (int col = 0; col < letters.length(); col++) {
           for (int row = 1; row <= numRows; row++) {
               Label label = new Label("Item "+letters.substring(col, col+1)+row);
               Group group = new Group();
               group.getChildren().add(label);
               group.setRotate(90);
               root.add(group, col, row-1);
           }
       }
  
       final RowConstraints rowConstraints = new RowConstraints(100, Control.USE_COMPUTED_SIZE, 200);
       for (int i=0; i		   

• 2.1 RC1 - strange behavior when you change the data in the table

  I recently found a new strange behavior of the SQL Developer. On a small table or a table with a filter where all the data is loaded, but not all lines can be displayed on the screen, trying to change the data in the table. When I confirm the editing with the key enter, Developer SQL jumps always until the end of the data. Quite confusing and boring. The cursor seems to remain in the field that I have edited, then moving upward or downward line force SQL developer to this line.
  
  Appears not to be the case when all the data are loaded instead of punch, but if you force Developer SQL to load all the data, I can reproduce this strange behavior.
  
  Sven

  Bug 9205959 is fixed.

  -Rambeau

• Strange behavior of JMS Messages

  Hello
  
  I m using WL 9.2 with 2 JMS servers. Have 2 JMS Modules, one for each JMS server and I m sending messages to one of them (TestModule).
  This module is deployed across the cluster (in this case because I m test is deployed in my AdminServer).
  I m writes, in my test, 3 messages to this JNDI ' TestModule! TestDistQueue' (my module and my distributed queue).
  I ve created a queue browser to see what the hell is going on, and this is the strange thing, in a performance of the browser appears 2 messages, I run again the browser seems 1 message, run, 2 messages and if we... never 3 messages at the same time.
  The problem is when I use this message only 2 of them are consumed.
  
  I ve seen all and no clue what so ever what current...
  
  Someone has an idea to what was going on?
  
  see you soon

  It is not clear from your description, that you are trying to do, as typical applications use a single module, including those that use distributed destinations, and typical applications don't use the convention of specifying a module name in their JNDI name. (The "!" syntax makes me suspect that you do not use JNDI to research destinations, rather than using the JMS session call 'createQueue()' rarely recommended.).

  Never-the-less, I guess that the problem is simply that your use of a distributed queue and did not realize that the PIN line of browsers and the consumers themselves to a member of the single queue. To ensure complete coverage of a distributed queue, the best practice is to use a MDB WebLogic: WebLogic BMD automatically ensure that each Member of the queue has consumers.

  Furthermore, if you are using distributed queues, then the best practical config is as follows for each homogeneous set of JMS servers:

  -Configure a WL custom store per server, the default server migratable target target.

  -Configure a Server JMS by target the default server migratable target, server, set the store for the JMS server to be the same as the custom store.

  -Configure a single module JMS, target to the cluster.

  -Configure a unique subdeployment for the module referenced by each JMS server (and nothing else).

  -Configure one or more queues distributed for the module. Never use default targeting - use rather subdeployment advanced to target each distributed queue to the unique subdeployment you defined previously.

  -Configure one or more factories of custom in the module connection, use default targeting.

  I recommend reading through the admin JMS and guides of the programmer in the document if you did not already. You may find that the chapter of the new book "Professional Oracle WebLogic" JMS is useful.

  Tom

  Published by: falls on November 4, 2009 10:12

• Strange behavior when reading binary file

  I'm reading from the binary data as flattened. The file was saved as a class of labview which contained the table of waveforms and other data. When I read the file with read binary file vi with class attached to the type of data the data are correct. But when I read the as flattened data something strange happened (see attached image). The two best shows correct data and two charts below shows the partially correct data. When you write code to read the flattened data I followed the instructions on http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/how_labview_stores_data_in_memory/ and http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/flattened_data/.

  The strange is that there is gap around 1.4 s (marked in red), but the samples before and after game.

  I don't know what I'm doing wrong.

  I have LV2011.

  Demand is also attached.

  

  

  Assuming that you your decoding of binary data is correct (that is, you have the data structure of the serialized class figured out) the problem is probably that you don't the read as binary data, you read in the text using the text file... Modify the read fucntion than binary.

• Strange behavior when creating a composite with ' without validating key. '

  Hi all
  
  It's very strange for me. Can you please tell me where I am wrong.
  
  I want to create a composite key for the combination "INT_ID" and "STO_ID" columns in the table "act_ord". because this table contains already more entries in double for this combination, I decided to use 'enable novalidate' to skip validation for records duplicate already existing while creating constraints. But I get the following error "ORA-02260: table can have only one primary key" executing the below statement 1.1. If I create a 1 column with option novalidate constraint means, its working fine.
  

  1.1 Not working:- Giving error ORA-02260: table can have only one primary key
  ALTER TABLE ACT_ORD ADD CONSTRAINT PK_INT_ORD
   PRIMARY KEY   (INT_ID,STO_ID) enable novalidate 

  1.2 Working without any error:
  ALTER TABLE SPL_VAS.ACT_ORDER ADD CONSTRAINT PK_INT_STO_ORD
   PRIMARY KEY   (INT_ID) enable novalidate

  Is there a limitation of use 'enable novalidate' with the creation of composite primary key?
  
  Please take the necessary steps and make your suggestions.
  
  Kind regards
  Jame

  It is clear to me why you get this error. Here's a unit test where I get a different error (more logical).

  Note: to do this, you must first create a NON-unique index on the columns that you want to be in the primary key. Then use the clause for INDEXING to HELP when you add the primary key.

  SQL> create table test (i number not null, j number not null);
  
  Table created.
  
  SQL> insert into test values(0,0);
  
  1 row created.
  
  SQL> insert into test values(0,0);
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> select *  from test;
  More...
  
           I          J
  ---------- ----------
           0          0
           0          0
  
  2 rows selected.
  
  SQL> alter table test add primary key (i,j) enable novalidate;
  alter table test add primary key (i,j) enable novalidate
  *
  ERROR at line 1:
  ORA-02437: cannot validate (TOON.SYS_C0028830) - primary key violated
  
  SQL> create index my_pk_index on test(i,j);
  
  Index created.
  
  SQL> alter table test add primary key (i,j) using index my_pk_index enable novalidate;
  
  Table altered.
  
  SQL> insert into test values(1,1);
  
  1 row created.
  
  SQL> insert into test values(1,1);
  insert into test values(1,1)
  *
  ERROR at line 1:
  ORA-00001: unique constraint (TOON.SYS_C0028831) violated
  
  SQL>
  

• Strange behavior when using groupspec in netstreams.

  I started using the groupSpecifier to connect two players in a game I'm developing. Before, I was using a server to swap their farID, now I use the groupSpec netGroup, and it works well... but I got this weird problem:

  The first seconds of 2 to 8 netStream.sends command, I got like 2 seconds delay, after that, communication is almost instantaneous.

  Don't know why this is happening, but I don't want to fully implement netGroup if I'm having this kind weird behaviors...

  All do not know why this might be happening?, when I used NetStream.DIRECT_CONNECTIONS it didn't happen.

  Thank you.

  Update: looks like it's not about how long I have to wait for it to start working properly, it's how sends commands I do (between 0 and 10, seems completely random).

  the delay you see is the delay "pull" mode, while the Group relies (trivial) latency minimum spanning tree for the multicast stream ' push' mode.  probes need push mode any quantity rate data as well as the time to move from the probes to be judged.

  For more information on what is happening, look at

  http://TV.Adobe.com/watch/Max-2009-develop/P2P-on-the-Flash-platform-with-RTMFP/

  multicast starts at nearly 36: 25, but I recommend watching all this.

  If your groups are going to be quite small (not more than about 10-14 members) and you send data, you will find netGroup.sendToAllNeighbors () will always be a low latency, but the sender will send data to all peers (other peers don't help each other) and it will not get to everyone once the group becomes greater than 14 members.  For more information about this, which

  http://TV.Adobe.com/watch/Max-2011-develop/advanced-P2P-with-RTMFP-tips-and-tricks/

• Strange behavior when recording in the form of photoshop layers

  Hello!

  I built a 3d cube and I want to get it as a menu into Encore. The thing that intrigues me is that when I export via the command "Save as photoshop layers" in AE, the PSD resulting looks totally different from the model of EI that I taped.

  I tried to precompose everything so that I have only one layer in my computer to output, but that did not help. I also added an effect to the precomp to see if it helped, but the results are the same. It looks like little to the camera went inside the cube in the PSD! I double checked that I have the active camera defined as my point of view in the comp window.

  Any idea on what could cause this?

  In fact, the behavior is correct. She uses the stacking order, not visibility to generate the respective Photoshop layers. If you re - organize layers in Photoshop (drag etusivu precomp upward), you get the good result of the search. What languiage is this? Latvian? Lithuanian? Estonian? Kinda reminds me of the Finns, but not quite...

  Mylenium

• Strange behavior when searching from the address bar

  Hi all! I tried to remove google as the default search provider in firefox. To do this, I did these two things-

  -Duckduckgo moved to the top of the list in the firefox search box and set it as the current research.

  -Put the URL 'https://duckduckgo.com/?q=' keyword and keyword.enabled to true.

  However, this makes my search from the location bar (single word and several Word channels) still return google.

  There seems to be something to do with the entry of google search into the firefox search bar. If I remove that, it behaves as expected - single word searches then return an error "Cannot find server" (not quite what I wanted but probably correct behavior) and several Word searches go to Duckduckgo.

  Any suggestions on how to solve this problem without removing the option of completely google search would be appreciated.

  Thanks in advance

  It is supposed to function as described in this article, it seems that you have followed: search bar location | How | Firefox Help. I see no reason for the presence or absence of a plugin of search engine related. You have additional modules that could touch location bar behavior?

  You can try this: create a clean profile Firefox. Which will work around the current modules and custom, settings have fresh data bases of fresh settings and a cache folder.

  Close Firefox and starts in the Profile Manager, as described in the management profiles. Any time want spending profiles, close Firefox and come back to this dialog box.

  Change your keyword preferences and see if they work in the new profile. A little luck?

• Strange behavior when using Labview to collect data from Tektronix oscilloscope tds8200

  I hit a wall in trying to understand this one. The problem I have is that my application will not start the oscilloscope when it should.

  I use an oscilloscope Tektronix TDS8200. My goal is to collect data from the oscilloscope using Labview waveform. First of all, my program initializes and configures the oscilloscope; This part of the program works very well.

  The second part of the program begins the acquisition of data with the function 'Tktds8k Start or Stop Aquisitions.vi', which is to press the button run on the scope. The function "tktds8k to Waveform.vi" is used and should ideally return data, which I connected to a waveform playback graph.

  When I run my program, the first part runs without a problem, but as soon as the program comes to the service get the waveform, the run button in the scope, which is green when running, turns off; the program then expires, and no data is collected.

  Here is where it gets weird. I went through the debugging to try to understand this point, and I put breakpoints on the beginning and get shape wave functions so that I could scroll through the last part of the program. The program continues with the departure function, and the button run in scope is green. The breakpoint for the function get the waveform is reached and when I press on continue, turns the Run button and turns it off then back on almost immediately. data are collected, the waveform graph appears and the program ends without error.

  I thought that the timetable could be the problem, so I did the program wait as long as five seconds between the functions of start and get the waveform and that did not work. I also tried to move the start function to before the configuration functions and remove start completely; no method worked.

  is there any ideas on why, the program works when I enabled breakpoints and isn't when breakpoints are disabled? I'm sure there is an easy solution, but I was not able to find a solution.

  I have attached a pdf that contains information about the functions of the Oscilloscope (tktds8k.pdf), and I have also attached my program.

  
  

• Strange behavior when using units and controls the ring

  Hello

  Something unexpected occurs when you use a control of the ring with units:

  1. Create the control of the ring,
  2. change the representation of double
  3. display unit label,
  4. the value of mV as a unit,
  5. edit items
     1. disable the sequential values,
     2. Add an element with a value other than zero for example 123,
     3. Ok
  6. Select the value created,
  7. create a KPI DBL with V as unit,
  8. wire from the control to the indicator,
  9. run

  What I see in the indicator is 123 V instead of the expected 0,123 V

  You guys are able to reproduce this?

  Noticed on LabVIEW 2013 and 2014, 32 and 64 bit on Windows 7 and 8.1

  Thank you

  Boris

  Bring up the digital display of the command of the ring.  You will see the units you enter under edit items menu is indeed volts.  Any prefix to units only acts on the screen.

• Strange behavior when you try to use drag events

  This is the most likley I'm missing something obvious, but it's very confusing.

  I'm prototyping a simple application in Flash Pro 5 (have one already on the app store and the other submitted) and the design would work well with an application on a blow-down menu. I have a kind of screen built gross appearance and basic functionality works, so I decided to try for the bolt in the management events swipe_down to see how it worked. I have included the necessary libraries qnx.events and made the following in my initialization routine:

  QNXApplication.qnxApplication.addEventListener (QNXApplicationEvent.SWIPE_DOWN, swipePanelShowHide);

  and add this function:

  private functionswipePanelShowHide(e:_QNXApplicationEvent):void

  {

  If {(cPanel.visible)

  cPanel.visible = false;

  } else {}

  cPanel.visible = true;

  }

  }

  When I build, deploy and run the application in the Simulator, it works as a screen empty. (see image). If I comment all QNX code, it works well again.

  Any ideas?

  

  Fionally had the time to deal with it. I had managed to misdirected an inclusion. Now works. Thank you all!

• Strange behavior when duplicating a text layer

  Hi all

  I followed a tutorial.

  I created a text layer.  typed in the number '2012' in white

  I placed a texture in the model.

  I used the text as an alpha matte layer

  Then I duplicated the text layer, and instead of the layer being called 2012, it is automatically changed to 2013.

  When I look at this as the layer name or Source name is the same '2013 '.

  So, I create a new text layer and type '0' and the layer was appropiately named 0

  But when I've duplicated this layer, it was named 2014

  When I duplicated all the text layers, he was appointed the next higher sequencially number

  This name change model has been broken only by typing a number when the first figure was anther value place i.e. 4329

  Then duplicating a text layer would begin to appoint the with this value plus 1.

  Same thing if you separate the text layer

  I think it's a bug or bad programming.  This can lead to unnecessary confusion if you are working on a draft text number of layers and must duplicate many of them, or several times.  Or is the answer to the front to compose the text before the duplicate layer - NO one who has his own shotcomings.

  On a Mac Os 10.6.8 CS5.5

  I found a solution.   Rename the text layer by adding space before or after the digits.  Now duplicates are named as the text written with a + 1 suffix to each additional duplicate layer.