BlackBerry 8310 Smartphone software updates

Similar Questions

• BlackBerry 7290 Smartphone software update

  Hello.

  I have an old 7290 4.0.2.35 running on the platform 18.0.138 already sold by Vodafone Portugal, but now with its disconnected service.

  Nevertheless, I thought to update this BB, and this is where I need and would like help on the following 3 questions. Thus,.

  -As far as I understand, OS version top that I can update is 4.1.

  -From the BB site I have not found a link for Vodafone Portugal, nor on the Vodafone Portugal site a link to download anything (!) I downloaded v4.1.0.314 from Vodafone UK.

  Now,.

  1 is it true that v4.1 is the top of the page updated version of 7290?

  2. can I use v4.1.0.314?

  3. can I use this version, downloaded from Vodafone UK?

   

  Thanks a lot for your time and help

  Luis

  1. Yes.

  2. Yes, 4.1.0.351 is better. I suggest you use it.

• BlackBerry OS Smartphones Blackberry Bold 9900 software update from version 7.0.0 to version 7.1.0

  HELO everyone

  I tried to upgrade my device software Blackberry Bold 9900 version 7.0.0 to version 7.1.0 but with difficulties. I tried to use the Blackberry Desktop Manager, but there was no version 7.1.0 figure among the available updates. Even when I tried to do it directly through the official website of Blackberry, also Version 7.1.0 was not shown. Finally, I tried to do the update with my phone directly by going to: Options > device > software updates.

  It shows my Version 7.0.0 Bundle 2406 current and available in a version 7.1.0 Bundle 1149. But when I clicked Perform Update to download the new version, he has shown preparing to download but then displays an error message such as "Download cannot continue because your device cannot connect to the update server using the following methods: Wi - Fi.

  During this time, I did not upgrade with a Wi - Fi connection because I have an active blackberry data subscription of 2 GB of my mobile operator.

  Please I need help on how to perform the upgrade from version 7.0.0 to version 7.1.0 with the last packet.

  Thanks to you all I'm waiting for your helpful solution.

  Hello and welcome to the community!

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• 9860 blackBerry Smartphones software update... IN CASE OF FAILURE

  Like a good little BlackBerry user, I followed the prompt to load a software update.  He asked the question, "Are you ready to be two hours without your phone or emergency access?"  I said, Yes, and he began "backup of your data.  Unfortunately, it is stuck at 6% in "progress in the backup set".  I tried turning off and re-boot and it always gets stuck at 6%.  If I'm doomed?  What I can do.  Will reads now and pray that he will magically fix itself from one day to the next.  If not, then I hope you smart people in these support forums will have the answer for me.  Thanks in advance for your help.     Stephani

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Smartphones from blackBerry Torch 9810 Software Update Lock-up

  This 9810 was to make a wireless software update and got 19 percent of the total backup (Social Feeds) when it locked in place - it was left running overnight without change. The telephone switching market he returned to the same point. removing and replacing the battery automatically starts the process of update again, until he gets to 19% and crashes again. Switch on the screen when you press ALT and shift.

  Oh no... now you have a more catastrophic problem... 507 means that everything is gone from your BB - the operating system, applications, data. First we need to get the features of your BB, and then you need to restore from your most recent backup.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below. (not applicable in your situation, since you can't take one now)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You must also use these tricks, but please substitute 6a or 6b above if all load allows you to use a Web site:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Unlocked blackBerry Smartphones Software Update has not received the AT & T brand PRIVATE when you use a non - AT & T SIM card

  Dear whom it may concern,

  I saw one of the support forum of Blackberry Web site on "software update, not received the AT & T unlocked brand PRIVATE when you use a non - AT & T SIM card". How can I receive the OTA update in the notification bar?

  Now, my OS is Mashmallow 6.01 build No.. AAF355 (June 1, 2016) or do I have to update (auto loadder) my Priv to AAG873 in order to get the direct OTA from Blackberry in the future.

  Thank you

  Good questions. I can speculate only at this stage. I guess that since it is updated by BB, they use a revision update for all devices to facilitate management. AT & T updates their different, since they have different methods of approval (Note T-mobile even updated as unlocked devices). Unless you want to get specific version of AT & T that could fix something that the other version does not work, I'd wait for the OTA. I did three refills of OS because I couldn't OTA of AT & T, and they take a lot of time. Take the time then to restore and to reconfigure all the settings you had before. Not funny.

  To be more precise questions. Depends on you, but for me, would be updated via OTA only now that it's available. Yes, if you want auto charger, use AT & t. even as before, wait for OTA, unless you have a specific automotive need load the operating system.

• Comparative table of blackBerry Smartphones Software update

  Is there a list/table out there anywhere, which gives the improvements/differences of each software update?

  Thanks in advance.

  Technical Center blackberry.com, here you have two links:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&message.ID=...

• BlackBerry Smartphones Software Update Fail

  I have a Curve 9350, and I received a notification this morning that I got a software update, so I accepted and he is trying to do the update on my real mobile, (not the Manager Office via a PC), but is currently blocked to save the social stream 0% and 9% in all data , and he was blocked for about 3-4 hours. Please HELP as I can't use my phone and its my business phone!

  Try this,

  • Remove the battery from the device.
  • Connect to the PC and launch the BlackBerry Desktop Software.
  • Replace the battery of the device and let it boot.
  • Are you aware of any update or that the appliance needs of the operating system installed? If so, complete the upgrade so that plugged into the computer.

  If the backup block again at 10 - 20% on the social backup module feeds, please let me know.

  Also, please check your private messages here in the forum to me.

• BlackBerry Smartphones Software Update interrupted

  I have in my office the Desktop Manager 4.7.0 and I connected my device to the PC to do a sync and she came back with a software update, I started the process, and then I lost power on the PC, so the update was not completed and now blackberry led lights up 2 times on red and I can't turn it.

  It ia an easy way to solve this problem

  Hello!

  No.... There is no easy way to solve this problem. Settle in for some work. Here is a guide that can help you:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck!

• BlackBerry smartphones software update of the device since 31/08/2009!

  Hi all

  I am living in the Kuwait and my ISP is Zain and the Kuwait.

  before 2-3 weeks, I got my BB Curve 8900 through the Application in my Desktop Manager 5 loader, when I run the update and after starting the application responsible for the search for new and legacy software, I get a list of software of the device (firmware) which are available for download and I can choose between versions , reinstall the current downgrade and improve.

  Since 08/31/2009, when I run the application loader - > software update, I still get no results and he says my software is up to date and im 100% sure that it's not because I went down before, the latest version was 4.6.1.250 and I installed it is 4.6.1.206 as the new version is not Arab.

  So my question is, why I can not get the list of device software, so I can choose the version I want?

  I've tried it on several computers and several internet connections and still he could not get it.

  Your answers are greatly appreciated

  concerning

  Khalid Al-Assousi

  Hello and welcome to the Forums of Support BlackBerry.com.

  Just do the upgrade manually... Download the file from the OS and use the instructions in this link.

  http://www.BlackBerryForums.com/General-8900-series-discussion-Javelin/193197-latest-OS-8900-4-6-1-3...

  Always, make a backup first, using the Desktop Manager.

• BlackBerry Curve 8900 to new Smartphones software update at a standstill due to lock encryption

  I'm in the middle of the last software update using my laptop on PC. I'm at the stage of restoration and now it is blocked with a message saying "Device Encryption is enabled. Your BlackBerry is currently locked. To continue your unlocking device. I disabled encryption on the device, but the laptop is frozen on the error message and I can't seem to move on any other display in update mode. In any case able to offer a solution? Thank you!

  Restore your most recent backup.  If you do the OS update on the PC, then the process should have another backup who started.

• BlackBerry Smartphones Software update problem with new tour

  I got my wife a tour yesterday. When I connected it to my laptop to add music, it says that there is a software update (OS 4.7 and other files). So I updated the device (took about 45 minutes or more). Then I clickd'autant Media Manager to see, I had not installed it yet (I use Media Sync with my Storm). So I installed Media Manager and said to reboot my PC. So I restart and reload the desktop software and low, and here I thought I should do the exact same device update that I had done a few hours ago!

  The unit works fine as far as I can tell. Would it be a bug in the desktop software? A glitch in the OS device? Or should I re - update the tour just to be sure (where he actually has not worked right the first time)?

  If you need more info, let me know what you need.

  OK, well... Sorry, the operating system is not updated. The Tour launched with OS.40 and, last week, Verizon started pushing notificiatons for update of Os.53, so what is updated to the device, the operating system was NOT.

  so... my recommendation - do a full backup in the first place with the Director of office and then allow the upgrade of operating system continue.

• BlackBerry 8310 Smartphones import contact issues.

  Hello, I had some problems with my 8310 for the last 9 hours or more. First of all, I'm trying to import my contacts from a csv file into the 8310 using the BlackBerry Desktop Management software. I tried these steps, even if they were terribly wrong. I found here: http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB11194&slic...

  1. Connect the BlackBerry smartphone to the computer.
  2. Open BlackBerry Desktop Manager and double-click Intellisync. (I still saw nothing that reads Intellisync.)
  3. In the Intellisync® window, click Configure PIM. (Again it is Intellisync with another unknown word PIM)
  4. Select the address book check box, and then click Choose.
  5. Select ASCII import/export , and then click export.
  6. Click Browse and enter BlackBerry.csv for the name of the file. This will create the BlackBerry.csvfile.
  7. Click Open. When you are prompted with the message that this file does not exist, click Yes.
  8. In the section select Application, click OK, and then click OK in the Configuration.
  9. Click on Synchronize now. This will create the CSV file with the field mapping to add contacts.
  10. Add the contact to the CSV file and repeat step 4.
  11. Select ASCII Import/Export , and then click import.
  12. Click Synchronize now. This important contact with the CSV file to the BlackBerry device.

  So what I got to do is the following.

  1. Click on synchronize
  2. Menu left click on sync
  3. Click Sync out next to "configure my sync for my office program settings.
  4. Check the address book.
  5. Click Setup
  6. Exporting importing ASCII > next
  7. One-way synchronization device< ascii="">
  8. Then, I put the options delimited by commas and quotes (I don't know what it is)
  9. Next > finish > Ok
  10. Then I click on synchronize in the left menu.
  11. Check the synchronize Organizer data. And click on synchronize.
  12. It works for a second and gives me the following:

  "Error Code 0 x 80040057 check Documentation.

  System specs

  Windows 7 Build 7100.

  Intel Core 2 e5200

  2 GB of Ram

  ASUS P5KPL-CM

  I'm so lost and so frustrated with this thing, it's unreal.

  Thanks in advance for the help.

  Problem solved! I figured out that the header of the csv file was not fair. They must have a header of category on them. You can do this:

  1. export to a csv data file you want to import your old software
  2. Adding one of the elements of data to your blackberry
  3. export data from blackberry to csv format
  4. copy old data first to the new file csv file properly formatted CSV of blackberry.

  I repeat if you have this error Error Code 0 x 80040057 check the Documentation. Is your solution.
  

• BlackBerry Z30 BlackBerry Presenter smartphone software

  How to get the app for BlackBerry Presenter smartphone for z30 software

  BB10 support for it.

  You can use the HDMI output to connect to a projector with a DVI or VGA adapter directly or

  Software package for the Smartphone blackBerry presenter can be installed on smartphones BlackBerry 7

  Snip on link

  It is not possible to install the package of software, available at http://us.blackberry.com/smartphones/accessories/presenter/, on a BlackBerry smartphone BlackBerry® smartphone BlackBerry® Presenter 7 running. This is due to the device BlackBerry Presenter being abandoned and unofficially supported on BlackBerry 7.

• BlackBerry 10 Blackberry OS 10 software update

  My blackberry Z10 is running on 10.0.9.348. And I try to install whatsapp requiring less 10.0.10 or above. The problem is that I can't update the software and I check for software updates each time I get a massage that I have the latest version of the software.

  What should I do to update the software?

  Thank you.

  Hello and welcome to the community!

  Each carrier controls updates to their users... yours simply did not updated yet. There are tricks to try to force it, but they come with the usual precautions - some reports exist users doing this 'force' and make them unusable BB on their domestic carrier network (changes to the radio file and other, which are not compatible). But, if you want to make the attempt, here are the tips:

  • http://CrackBerry.com/how-get-latest-BlackBerry-10-software-your-Z10-even-if-your-carrier-hasn ' t-push...

  Good luck!