BlackBerry 9000 "BOLD" Smartphones constantly disconnecting from the network.

Similar Questions

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• BlackBerry Curve 9300 Smartphone disconnects from the network - no BBM, email etc. - send or receive

  My Curve 9300 worked very well during the past year, and all of a sudden the phone seems to disconnect from the network without code error etc. Accordingly, no calls or output can be made / received, emails and BBM surveys the same question. All indications are that the service is running. The SW is version 6 and apparently is up-to-date. Any suggestions?

  peterle8295 wrote:

  My Curve 9300 worked very well during the past year, and all of a sudden the phone seems to disconnect from the network without code error etc. Accordingly, no calls or output can be made / received, emails and BBM surveys the same question. All indications are that the service is running. The SW is version 6 and apparently is up-to-date. Any suggestions?

  Hello guys

  Welcome to the community

  Sorry to hear about these issues. Please, try to contact your carrier and check your Blackberry data Plan.

  Ron

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A200 Win8 64bits - Atheros AR5006EX disconnects from the network at random

  First of all, sorry for my bad English.

  Hi, I installed W8 a few weeks ago and I have a problem with the WiFi. The adapter disconnects from the network at random. Not a protocol TCP/IP fail because I don't lose the connection to the internet, I lose the connection to the network for everyone.
  Simply disconnected from any wifi network.

  I have read that wifi chips Qualcomm have problems with drivers in W8. I tested many pilots and all do not work properly.

  Any help?

  The wifi card is: Qualcomm atheros AR5006EX and the laptop is: Toshiba satellite A200-1TP.

  Drivers I tested (and didn't work):

  http://drivers.Softpedia.com/get/network-card/Atheros/Atheros-AR5006EX-WLAN-driver-300119-for-Windows-8-x64.shtml

  Thank you!

  Do you have these problems with the operating system supported?
  I mean A200 is pretty old machine and certainly not supported for Win8, so it can be a problem with all of this, especially with the drivers.

  Let's see if someone else has the same machine and have the solution to this.

• Current file to use when it is disconnected from the network wireless/wired - shared network drive

  Hello

  We have a problem where we receive a "file in use" message when you are disconnected from the network. To reproduce the problem, what we do is:

  (1) connect to the wired network wireless disabled with

  (2) create a test document

  (3) to enter text and save on network share

  (4) remove the network cable

  (5) add additional text

  (6) reconnect the network cable

  (7) try to save the file to the network share

  At the beginning by clicking the X is the new message you want to save. Click Yes and the message arrives until the next time you hit the Hit of X no. and he loses the last change.

  From here we then go up to the network share, open the file and it comes up with "file in use. Open read-only. File is opened by us (Administrator account), and there is NO temporary file in the shared folder.

  Tried so far:

  -Run net config server/autodisconnect:-1 for trying to stop it disconnect the share

  -Checked pane, pane preview and off 'display the description of the pop-up window for folder and desktop items '.

  -Windows Update

  We try to reproduce on wired connection, because it is easier to reproduce that disconnects wireless. Seems to have an impact on several operating systems. Share folder is shared on a Windows 2008 R2 x 64 machine.

  Is this a known problem or is there something that we can configure to try to prevent the locking file after logging out? Ideally, we want the decline to go unnoticed and provide uninterrupted service to the user, unless they are trying to save during the fall.

  Thanks in advance for comments :)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• After time computer disconnects from the network

  When I connect to my domain I can open my outlook uses exchange server without password, share my printer on the network, and access to network files.   After some time the printer is disconnected from the network be connected (always available for me no network) my email brings me a password and all shared network files ask me for a password.

  My computer is windows xp pro, we have 2 other xp pro connected machines that do not have this problem.

  I also never lose my internet or the ability to access any network files that I just asked for a username and pword after a few minutes.

  Only way to fix the printer and the problem is a reboot and relog in.

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Disconnecting from the network home

  Win 7 I have a stand-alone computer (not other computers) with a USB - connected printer and a connection to a modem (without router) via a network (?) (not USB) cable.  I have no other computers or printers.  Win 7 connected me to a network home, maybe because my printer is compatible with wireless (but I have no WiFi - or interest in functionality).  If I disconnect the home network I lose the internet connections or printer?

  My apologies but I found your statement at the opening a bit confusing.

  Your home network is connected to the modem, a local area network, and is a type of HOME that helps your computer share with a reliable source, connected to your modem/router.

  A HOME network is essentially the default setting...

  A PUBLIC network limited with any computer that can be attached to your router/modem to share files.

  If your printer is connected via a USB cable, disconnect from the network will NOT affect the communications between your computer and the printer and the printer will do what you expect it to do.

  However, you will lose Internet you disable the network connection.

• BlackBerry 9000 "BOLD" Smartphones software crash

  Our company has some Blackberry 9000 "BOLD" (with the top of the page mail and mail easy)

  Each phone has suffered some crashes (fortunately rare) during normal operations: the led turns red, the black of the screen and is necessary to remove the battery and restart.

  Data on BONE are:

  v4.6.0.125 (Platform 4.0.0.134)

  Kernel v3.8.5.48

  Micro Edition 1.0.115.175

  Can you tell me if RIM has released a update?

  Thank you

  Fabio Bianchini

  Manager Sistemi Informativi

  EDIT: Remove personal information

  My HH OS is updated then your one - v4.6.0.162 (Platform 4.0.0.155).

  What duty service do you use?

• BlackBerry 9000 "BOLD" Smartphones shows 1 unread email problem

  Yesterday, my 9000 "BOLD" began to show that I had 1 unread email (the icon at the top of the main screen).  The e-mail tab folder EVERYTHING was not a red stars indicating unread messages and when I go to the email app and press U for unread I get the message "No Unread Messages in the list"

  Today I received emails 34 icon went to 35 unread, I opened all the 34 for today and the icon still shows 1 unread.  I also highlighted all the emails, them marked as read and then scored as reading and still the icon shows unread 1!

  I tried a battery pull to clear the icon but that did not work or the other.

  Please can someone advise how to clear this?

  Thank you very much

  Bob

  Tips to clear the message unread... try them in the order.

  (you probably have a RECORDED message, unread).

  If you have a new icon rogue Message on your home screen, or a negative number (-1), one of these solutions could erase or reset:

  Try these options:
  The main Messages folder and select today's date, click on the menu button and then select Mark prior opened.
  * Hard Reset BlackBerry now ALT CAP (right Shift key) and DEL (or with the BlackBerry power, remove the battery and reinsert the battery)
  Messages > saved Messages
  Messages > view folders, check each folder (calls, SMS and MMS, and boxes, saved missed boxes, browser, phone logs etc.)
  * Scroll at the top of the folder, on the title menu, click or tap to MARK PRIOR OPEN date
  Change your theme and see if it persists and return to your desired theme. (Options > theme > select.)
  * Connect to Desktop Manager > backup/restore > advanced. On the right pane is the list of the data on your device. Scroll to the e-mail highlighted messages database, and then below, select TRANSPARENT. This will clear your system of all messages.
  * Clean and reload your OS.

• Disconnected from the network when during a Skype call and a game at the same time

  Separated from: Skype calls randomly disconnects any Internet on computer

  Sorry to drum up an old thread but I've seen this same issue. Whenever I'm on a call on Skype and an online game, I get dced much.

  It's a wi - fi connection and I have to reset my wireless router to restore the link.
  Win7
  64 bit
   
  And Yes, this happens only when you use Skype.
  Thank you!

  Hello

  -What is the online game you play?
  -What browser are you using to play online?
  -Did you do changes on the computer before this problem?
   
  Method 1: If the issue is only with Internet Explorer while playing online games, I suggest you to follow the steps from the link and check if it helps.
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
   
  Method 2: To the question connects to Skype calls are disconnected, I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: after the troubleshooting steps, see step 7 of the binding of boot is a way of putting your computer to normal startup mode.
   
  Method 3: If the problem persists, I suggest you to contact the Skype support for assistance.
  https://support.Skype.com/en/category/CONNECTION_ISSUES/
   
  Hope this information helps.

• HP Officejet 5740: disconnects from the network

  IMac El Capitan & Airport extreme router

  Printer will connect and stay connected while Mac is turned off.

  Turn on the Mac and the wireless connection is lost

  In some cases "impossible to find the network" in others, bad IP address.

  Have you tried wiring printer to the router (ethernet USB) same results

  Also tried hard wiring for Mac

  and finally no. son... basically all with the same results.

  Have tried all the suggestions reboot router, Mac, printer...

  Connects and disconnects...

  Need help

  I wanted to leave you hanging...

  Contacted Comcast and said that my modem is too old and it to replace.

  Now, I have a new modem/wifi combo and everything works.

  It reminds me of the guy who bought a button of his jacket and ended up having to buy a new jacket for the button!

  In any case thank you for your patience, and all's well that ends well.

• Get the latest data of Variable shared before disconnecting from the network

  Hello.

  I use Shared - published network variables for my communication between two PC's. Each LV software will pass the data to another.

  Sometimes the wireless connection to become really bad and the network connection stops.

  I want to get the latest data. Currently my VI will show the value '0' on the variable shared data once the connection is cut.

  I tried using shift, but she registers the same results.

  Can someone show me how I can stay past data when the network connection is disconnected.

  Thank you very much.

  Kind regards

  Hello Fan, Ravens

  It works! Thank you very much.

  Kind regards

• Connection Wi - Fi Windows guard disconnect from the network.

  We went from ISPS to Fios a few weeks ago and my dad's computer is having issues staying connected to the Wifi network. It is running win XP Edition family. It works for about 10 minutes until it is "Impossible to connect to preferred wireless network. When I opened the network available to try to reconnect, it does not work. It says "waiting for network" but never connects. Then I hit cancel and have to make my way to the properties of internet protocol tc/pic, then click OK, and it connects to the network for 10 minutes. Rinse and repeat. But the trick is before you go to properties of internet protocol, I have TO let it fail in the connection to the network is available.

  Another thing, if I have it configured to obtain an IP address and DNS of the server automatically, it is stuck on the 'acquisition of network address' forever. never connects. I have to manually set the IP address and DNS servers of the internet to work for 10 minutes... then the above questions.

  I have no idea how to solve this problem, then the internet will only work! Help, please!

  Hi patoons,

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have security software installed on the computer?

  Follow the methods below:

  Method 1:

  Disable security software and firewall temporarily on the computer and then try to connect to the internet.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Follow the steps from the link below: Troubleshooting network connection problems:http://www.microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

  Method 3:

  Also, try to reset the TCP/IP Protocol and check the results: how to reset the Protocol (TCP/IP) Internet:http://support.microsoft.com/kb/299357

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The VM that is disconnected from the network.

  A VM in our environment VI3.5 disconnected about twice monthly since network (is more accessible). There is no log information in the VM logs or Windows logs on a network problem. If the virtual machine is disconnected I had to remove the tick 'connected' (in the VM/edit settings) and set the scales again. After this procedure, the virtual machine is back in the network and works very well. The virtual machine is a virtual machine (VMware Converter 3 Enterprise) P2V.

  No idea what could cause the problem?

  Help would be appreciated!

  Hello

  I saw a strange behavior on two VMS (converted), they changed their AMD PCNET Family Ethernet Adapter network card driver (or I think they did, not 100% sure that we forgot to check this last after they have been converted) which resulted in 10 Mbps on the adapter (not disconnected) check your network adapter driver.

  If you have not already done so, remove all hidden devices (clean your VM).

  It will not help you at all, but I tried =)

  see you soon