BlackBerry phone Z10 battery does not

Hi, I have bb z10 and now updated with the new software its working perfect. the issue is my battery drained and I pluged my z10 with the charger. the phone is not turned on. I press the top of page powern button the red light blinks for 10 seconds and the scrreen shows z10 and it charges to 70% and the phone goes again and he executes the similar action again and again but fails to turn on. now the yellow ligh blinks but after some time he disspear too.

Connect to your wall charger, for several hours, remove the battery for a minute then reinsert it.

Your fine shoujld Z10 reboot.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry completely exhausted Z10 battery does not load when 10 BlackBerry smartphone is connected to the charger or usb

    Hello

    I have a BB Z10, two days ago, while the travel battery got completely exhausted and the phone got turned off. later, I connected to the BB charger and the phone does not charge, I tried to connect it to the USB, but it does still not load... just a constant red light nod. I tried to remove the battery for 2 hours and back and not luck it is plugged. Like I need my phone works, I tried to go to a service center but not able to locate one on the BB site, I bought a new
    BB Z10 battery and it worked fine. I went back to my place and it took about an hour for me and yet once again, the battery discharged and I am with the same problem now. Now, when I connect my Z10 to the computer (windows 8.1) I get a red + green slow light flashing and after say 20 minutes, it connects to the computer and the phone turns... and when I see the phone it says Exiting battery saving mode"" immediately followed by "turning off the appliance" and it loops constantly. "

    Help, please!

    It's weird, but not the first time I heard of this.

    See this: http://www.blackberry.com/btsc/KB36747

  • BlackBerry phone Q10 (q10) does not work after a reset of the safety

    I did a wipe of security that yesterday since I can't make or receive calls, sms messages or anything of the these, cant access my list of contacts, camera or photos. I can't put even in air time so basically its just do nothing. Calls are on the list of calls from well miss that when I click on call, nothing happens and my screen does not show anything when the call is incoming that it sounds yet. I tried a full reboot, registering the phone and nothing works, when I click on an icon, nothing happens even on the tutorial icon and it also crashes network settings

    Try this... let the Q10 power, remove the battery AND the SIM card and the card holders (if present).

    Let the SIM card, insert the battery to reboot and see what all works or does not work.

    You are connected to a WiFi router?  Can you connect to one?

  • BlackBerry Smartphones 8830 battery does not load

    8830 does not load even after 12 hours of charging.  I can't find new battery in any store, I tried Verizon, Best Buy and Radio Shack.  Any ideas?

    I saw at BestBuy, maybe not your battery.

    You can buy another battery to another carrier, Tmobile or ATT as well.

    Get the 88XX - green (lime) (C - X_2) - 900mAh<--is that="" the="" color="" of="" your="" present="">

  • BlackBerry new Z10 updated does not

    I've recently updated my z10 to the new OS update operation and have had nothing but ISSUES since, now the main problem is ive LOST ALL my contacts when I put it on the contacts it's just a white screen with something green circle that circulate in the Middle, for 3 straight hours now... This is not what I paid 700 dollars because I should have stuck with my torch to the least it keep contacts

    I would recommend you do a reload of the BlackBerry OS link

    Plug into your z10 and BBLink
    Then go to preferences and press on the optional software reloads

    Let the process do all your work, and then you begin to define your BB
    And load your backup.

    And let us know if your problem is persistence.

  • My i phone 6 more does not start

    My i phone 6 more does not start. Battery has been fully charged prior to stop phone work

    Did you follow the instructions in the document to support that you logged on the forum of? If so, under what to do then you contact Apple technical support. If you did that?

  • I need to export contacts as vCard iCloud to able to use android phone, but it does not work

    I need to export contacts as vCard iCloud to able to use android phone, but it does not work

    Help, please

    We need more than "does not work" to be useful.

    How do you try? Is there an error message?

  • Connected battery does not support 11%

    Question, that of why the battery is holding at 11 percent, hip but not load? I can do to remedy this? What may cause this etc... ?

    Early in the morning of 10/07/2016 shows 11% battery not charge.

    I plugged last night during the 9 p.m. Mountain time.

    After connecting, I was running Utorrent 3.4.9 of the overnight download of some files.

    A pilot plant was held yesterday 373.06 out ready driver NVIDIA GEForce game date 10/05/2016 - cost very spotless and without incident.

    I have two cables of load. Both worked fine yesterday.  Both are connected to a different location on a different circuit. Overvoltage protected by Belkin.

    Thank you, and here are my coordinates of the system.

    Name of the operating system Microsoft Windows 10 home
    Version 10.0.14393 Build 14393
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    System name XXXXXXXXXXXXXX
    System manufacturer Hewlett-Packard
    HP ENVY 17 Notebook PC model system
    System Type x 64-based PC
    System SKU xxxxxxxxxx
    Processor Intel Core i7-4510U CPU @ 2.00 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
    BIOS Version/Date Insyde F.42, 18/03/2015
    SMBIOS Version 2.8
    Embedded Controller Version 77,53
    UEFI BIOS mode
    Baseboard manufacturer Hewlett-Packard
    Model baseboard is not available
    Name of plinth base
    Role Mobile platform
    Start secure State
    PCR7 Configuration binding is not Possible
    Windows C:\WINDOWS directory
    System directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    The local United States
    Hardware Abstraction Layer Version = "10.0.14393.206".
    User name xxxxxxxxxxxxxx
    Time Zone MST
    Physical memory (RAM) installed 12.0 GB
    11.9 GB total physical memory
    7.90 GB available physical memory
    13.7 GB total virtual memory
    9.38 GB available virtual memory
    1.81 GB page file space
    Paging file C:\pagefile.sys
    Hyper-V - VM monitor Mode Extensions Yes
    Hyper-V - second level address translation Extensions Yes
    Hyper-V - virtualization enabled in Firmware No.
    Hyper-V - data execution Protection Yes

    Hi @gdcgray,

    Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you have a battery problem with an error "plugged in, not load ' and the battery does not fresh at all. It'll be a pleasure to help you with this.

    A remarkable work has been done by you by performing a basic troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

    It certainly looks like the battery needs to be replaced. However, let's first establish that it is the battery and not the connector of battery on the motherboard that is defective controller.

    Please follow these steps.

    Please try a hard reset first. Steps to follow:

    • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
    • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
    • Replace the battery and reconnect the charger
    • Please try to calibrate the battery.
    • Please update the bios from this link http://hp.com/drivers
    • Run the battery from this link: http://support.hp.com/in-en/document/c03467259

    Please run all the tests of components and if the battery is not please take note of the failure code.

    I hope this helps. Please let me know how it goes. I really hope that the problem is solved without hassle and the computer works great. Thank you for being a part of the community of HP. Please let me know if this can help, and if this is the case, please mark this message as a "'Solution Accepted". " Kudos would be also greatly appreciated for my efforts help. You can simply click on the ""Thumbs Up "button. "

    Thank you and have a blessed week ahead!

  • Re: Satellite C660 - 1 M 0 - battery does not work long

    I have a new Satellite C660 - 1 M 0, and after using it for a week, the battery does not as long as compared to the first time that I used it.

    I heard that a charge of initial battery life of 8 hours is required before the 1st use. Is this true?

    Hi richardvdoran,

    The battery time depends on usage and what you do. For example if you run a large number of programs and work with a high CPU utilization low autonomy and requires AC adapter / CC soon. Also surf the Internet needs battery power.

    You can improve the battery life if you use the eco mode power plan. This will reduce the brightness and other things to improve the battery life.

    First battery charge time may be 8 hours but that's different and according to other things.

  • Equium L20 battery does not load

    I have an Equium L20 what battery does not charge. The Windows Powermanagment says he is in charge, but the percentage increases ever, I tried different batteries with the same symptom as a result.
    Battery LED is orange glowing as if his load but no matter how long I leave it on charge, percentage does not change. Windows detects the battery as well with all the correct information... I tried to remove the battery, to no avail. .
    Is it a software or a hardware problem?

    Published by: ADMIN on June 7, 2008 08:12

    Hello

    I also believe that it is hardware problem. There must be some problem with electronic power electronic board. Particular component? This component is placed on the motherboard, and I don't really know if you can exchange it separately.

  • Satellite L655 new battery does not charge

    Satellite L655 new battery does not charge

    Hello halik

    It is not easy to say what the problem is here.
    Purchased new and original Toshiba battery with the same part number (model number).

    New battery is recognized by the system?

  • Satellite L30 - battery does not charge

    I have a Satellite L30 and the battery does not seem to charge.

    The battery keeps flickering light with yellow outside. I can use the laptop when I am connected but when if I'm moving to much the battery seems to lose the connection to the AC adapter.

    I don't know if it's the battery or something else.
    Can anyone help?

    Please, remove the battery and use laptop with AC adapter only. I imagine that you will be able to use your laptop properly. When the laptop is ON put the battery back in place and let us know if the battery led will continue to Flash.

    If Yes, I'm pretty sure the battery is dead and you need a new.

  • Satellite L655-13V - battery does not charge

    I have laptop Satellite L655-13V and the battery does not charge while I plugged the AC/DC adapter.
    and give me this status: "plugged in, not charging."
    And when I connect the battery only work on computer, and when I connect the AC/DC adapter only without battery the computer works also.

    But when I connect the battery and plugged to the AC/DC battery adapter not charging and give me this status: "plugged in, does not support".

    Please, help me to overcome this problem.

    Hello

    Leave the AC adapter plugged into the laptop for a longer period of time.
    In many cases, the battery may not start to demand immediately, as his deeply discharged.
    In this case the adapter must be connected to the laptop for a long period of precharge the battery, then the battery should start loading as usual.

  • battery does not last long in i pod classic 80 GB

    battery does not last long in i pod classic 80 GB

    Replace the battery. You can do it yourself, the parts are cheap online, or find a company that will be maintenance for you.

    TT2

  • Aspire V5 battery does not charge

    My Aspire V5 battery does not load.

    I don't know how old is your system, but I know that I had to replace a few chargers for my children, laptops...

    Unfortunately, no matter what the company. If it is not used only on a desktop and it never moves a cord of the charger can scoop on...

    It could be the PORT where the charger plugs or it could be the lead from the charger. Sometimes you can find the brake by the feeling of the line, and sometimes you can't see something wrong. If you knjow someone with the same type of system as yours, you can try charger of them and if it works, then you know it's your Charger if it don't then it maybe as I said the PORT when you plug...

    James

Maybe you are looking for

  • Direct print from laptop computer connection

    I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the p

  • Satellite Pro M70-113: the modem speed is too slow

    Hello I have a satellite pro m70-113 laptop.The problem is that I am not able to web surf, when you are connected to the Toshiba software modem that is integrated, because the speed is too slow.Connecting about 40 Kbps, but I can't even open the yaho

  • Windows Vista does not

    I have Vista and once automatically download some windows updates today, the PC will try to configure the update (3rd) and it starts at the beginning and it seems that I am stuck in a loop, it's on my laptop... any suggestions anyone?

  • keyboard, screen and mouse work erratically after update

    I've updated windows Sunday, Jan 12. After the update, keyboard, screen and mouse work irregularly. When I turn off my connection wireless internet everything works ok again.

  • Autonymous 1300 AP wireless bridge - BVI1 and bridge group Question

    Hi all I am setting up two 1300's as a bridge wireless, but I' am not going to use in the network, vlan 2 vlan 1 is my managent.  Does this mean that I won't be able to manage the wireless bridges because only the Group 1 bridge can route ip? I confi