keyboard, screen and mouse work erratically after update

Similar Questions

• IPad 2 Air battery drained and does not load after update 9.3

  Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

  I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

  I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

  I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

  Any suggestions are welcome. TIA.

  Well, I had the camera to load up to 61% where it is blocked again.

  Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

  I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

  Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

  Hope the above helps someone.

• Microsoft Wireless Keyboard 800 & 1000 mouse, work intermittently when connected to my new PC, but work very well on my laptop also under win7

  I recently got a new PC and my wireless keyboard and mouse combo made by Microsoft have not worked properly on my new computer. Sometimes, they work fine then other times it's like the keyboard and mouse cuts in and out, make miss me not type letters or the mouse past on the screen. They work fine on my old laptop that runs windows 7 as well. I reinstalled the drivers with those newer. I disconnected all my other stuff without wire and the problem persists. I plugged into different USB ports. I'm only a 1 m from the PC. I have no idea wat the problem would be, but I can assure you that keyboard and mouse work perfectly on my laptop.

  Thanks for any help

  Hi Sean89dunn,

  Method 1
  I suggest you try the steps from the following links:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Method 2
  If the steps above fail, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Lock keyboard and mouse or never dies updated 64-bit logic

  I recently updated my computer to Windows 7 32 bit, Windows 64-bit. Continues to feel something strange. My mouse and keyboard blocking either upward or right dies. I tried to dust off my PC, I tried to reinstall the drivers, the search for new drivers, even reformatting the PC, but nothing works. I was told that there could be something stopping electricity to travel on my USB slots, I find this doubtful however. As I've said a few times they simply to lock, the red light of my still shines laser mouse and my keyboard lights also light up. If I reconnect to another USB port, sometimes they work. The pc makes the little noise that when something is connected. It is even said that it installs the drivers... There is a 50% chance of it remains nonfunctonal or he started working for a while yet. Sometimes it's just one or the other who turns off, it is not always both at the same time. I also tried connecting USB keys and a portable hard drive USB slots that malfunctoned to see what is happening. They get registered very well, but if I try to put the mouse and keyboard in his place, I get no such results until I restart.

  Hello

  (1) did you check connect the keyboard and mouse to another computer?

  (2) what is the number of brands and models of mouse and keyboard?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  I suggest to start the computer in Mode safe mode with network and check whether you are faced with the same question. If the problem does not occur in Mode safe mode with networking you perform the clean boot to find what service or startup item is causing the problem.

  Step 1:
  Restart your computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-HK/Windows7/advanced-startup-options-including-safe-mode
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  Step 2:
  If the issue happen not in Mode safe mode with networking, try to set up your computer in a clean boot state and check to see if the same problem happens.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  Hope this information is useful.

• Because I downloaded the update of firefox I have more the firefox screen and will work not all of my favorites. Why?

  After I downloaded the latest update firefox I knew he disappeared. The opening of the screen is no longer the fox logo. The area of search in the toolbar indicates that leads research. And I find that not all my favorites still work. Example-I have to go to att to access my e-mail. That's fine if that's the way it is supposed to work, but if so I would like to know how to change my home screen - or at least the first thing I see when firefox opens on the site of att that I usually use my computer for e-mail. I'm also used to use google search and I'm an old lady of cat crazy I'm not really ready to change the way that I am familiar with my computer.
  Ideally, I get photo fox with the google search screen and click on the marked bookmark mail back on my computer?
  I'm not computer unless it is as it always has. Thank you, dawn

  Hello dawn, please be aware that there are malicious sites that will trigger the update of fake reviews/popups that try to get you wrong download software bundled with adware. never click on such websites or run these files offer - updates are managed automatically by firefox and do not download any file to it (always manually, you can check if you're up-to-date by going to firefox > help > about firefox).

  Please try these steps to find your firefox:

  1. Reset firefox (this will keep your bookmarks and passwords)
  2. then go to firefox > addons > extensions and where there are still extensions listed there, disable them.
  3. go to the windows control panel and remove all installed software recently where you don't know what he has or other suspicious looks.
  4. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

  Fix Firefox problems caused by malicious software

• wired keyboard and mouse not recognized after sleep

  TL; DR after waking from sleep, the wired Mac keyboard and mouse are unresponsive.

  I have a new Mac Mini.

  OS X El Capitan 10.11.2, 16 gb Core i7.

  I had a keyboard and a compatible bluetooth mouse, but I had the problem that after the Mini for sleep, the keyboard and the mouse were not detected.

  I bought an Apple mouse wired and wired keyboard.

  I have the same problem.  If I SLEEP the Mini, when I wake up it (short press on power) or the keyboard or the mouse are recognized.  It's like I have no connected.  If I disconnect it from the usb and the re - attach they are not always recognized.  I have to press power to force power off and restart and then my keyboard and mouse are recognized.

  Sometimes when pressing the power button to wake up from her sleep, I also get a "flickering" image monitor, which improves if I turn on and off to sleep a few times, or restart.

  It is very annoying, any ideas?

  Try turning off blue tooth - it seems to me the pop up screen searching for the mouse Bluetooth turn on the lock.

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!

• My MS Wirless Desktop 2000 keyboard and mouse work on my iMac with OS Lion 10.7.3?

  With regard to MS Wirless Desktop 2000 (kyboard and mouse)

  I'm using an iMac with OS 10.7.3Lion.

  Microsoft Wireless Desktop 2000 (keyboard & mouse) I just told bot that's software works with OS 10.4 thru OS 10.6
  It will not install on OS 10.7.3?

  Hello

  Probably best to check with the material support of Ms.

  Wireless Desktop 2000 - details<-- system="" requirements="" -="" macintosh-based="">
  http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#details

  The system configuration required

  Windows computer | Macintosh computer

  Computer operating system

  Windows 7, Windows Vista or Windows XP (excluding Windows XP 64-bit)

  Hard drive

  100 MB

  Other

  • USB port
  • Microsoft IntelliPoint v8.0 and Microsoft IntelliType Pro v8.0

  Internet access required for some features. Local telephone and long distance may apply.

  Download the software required for full functionality of all features.

  Internet access required for software installation: www.microsoft.com/hardware/en-us/downloads

  You must accept the terms of the license to download the software.

  2 alkaline batteries (included) required AAA.

  Computer operating system

  Mac OS x v10.4.x - 10, 7

  Hard drive

  30 MB

  Other

  • USB port

  ====================

  Microsoft Hardware support
  http://www.Microsoft.com/hardware/en-us/support

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  The keyboard and mouse are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  (If the device is defective, you can check with the vendor or Microsoft).

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 OR 1-800-642-7676 for MS material.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard and mouse USB freeze after sleep

  Hello

  every time my pc from sleep, I wake up the keyboard and mouse freeze and stop working. They only way to do their job is unpluging and pluging the usb cables. I use windows vista 64 - bit SP2, rx250 mouse logitech and microsoft keyboard comfort 2000. The drivers and software are later. (Downloaded from the site Web from Microsoft and Logitech).

  All the solutions for that?

  Thank you!

  Hey guys, I solved the problem with the mouse.  I have the keyboard and mouse plugged into the back.  Initially, I had the mouse and keyboard connected, in this configuration to include only the mouse was frozen.  I went there where their vertical connected to each other, that is to say the keyboard on top of the mouse on background.  that resolved the =)

• After loging in I end up with a black screen and mouse

  whenever I turn on my computer it starts as normal until it come to the login screen, I log in and the welcome screen come but after that I end up with a black screen and a mouse. I tried to stop programs from starting when windows does and have even deleted some programs that I thought that maybe boging my computer down when starting upwards. I ran out of other things to do.

  Thank you:

  Trevor

  I think the problem could have solved its auto but thatks for assistance. If it come back I'll for shure back to you.

  Thank you

  Trevor

• HP Pavilion PC 11-n010tu x 360: update Windows 10 - touch screen and Rotation works not

  Hi, I wonder if anyone can help?

  I upgraded my Windows PC 8.1 to Windows 10.  Since the upgrade of the touchscreen / screen rotation functions are no longer available or work.

  I noticed that the touchscreen HID device is not installed and I think the same for the rotation of the screen.

  Installation / upgrade didn't / Dopes not recognize that the device is a touch screen and model when checking windows itself declares there is no stylus or touch input available for this view?

  I remember a similar problem with the upgrade of Windows 8 to 8.1.  Can anyone suggest how the features of screen rotation and touch screen can be restored?  He was under the rpevious windows version?

  Any help is appreciated.

  Thank you

  Loaded the latest drivers from HP today and the problem seems to be resolved.  Operation of toch screen is back.  Screen rotation is back.  Thank you HP.

• computer laptop dv2000: keyboard locked and not working mouse proerly

  my computer keyboard laptop dv 2000 is locked and mouse clicks brings only the property window or opens the menu of the control panel. My os is Windows vista ultimate. I tried a hard reset by removing the battery. external key board and mouse .no use .all United together can help me. It will be a great help.

  Hi @pxj

  I understand that you are having problems with the keyboard and the mouse. I'd like to help, but I need more information. Please report the number of complete product for your laptop. See the following if you need help to find out who.
  How can I find my model number or product number?

  For the time being to visit these pages and see if something is applicable or useful.

  The problems of keyboard - windows.microsoft.com

  HP laptops - troubleshooting (Windows Vista) USB device

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• Unable to scroll 1 pixel (Alt + mouse wheel) more (after updating FF from 12.0 to 20.0.1) - is there a solution without Add-ons?

  Since I need a pixel of ScrollBar of the browser window, in FF 12.0 I used:

  MouseWheel.withaltkey.action = 4

  MouseWheel.withaltkey.numlines = 1

  MouseWheel.withaltkey.sysnumlines = false

  and I was able to use Alt + wheel to scroll the content of only 1 pixel.

  However, after updated to FF 20.0.1 Alt + mouse wheel stopped working so I try to reactivate the feature, but without success. According to me, there were a few changes from 17 FF:

  https://wiki.Mozilla.org/Gecko:Mouse_Wheel_Scrolling

  Pixel scrolling seem to be now removed from suggestions, action = 4 once upon a time "Document scroll by a number of pixels (given by the numlinesrequired property)" and now it says:

  ' Note that unlike 16 or earlier, you cannot specify the unit values of delta such as scrolling by pixel, line or page. That is, you cannot specify the value of deltaMode of DOM WheelEvent with all preferences. Under Windows, the unit of scrolling is online or page with the mouse wheel. »

  Is there a solution to re - activate a pixel scrolling without having to install Add - ons (each add-on for smooth scrolling some other behavior changes)?

  There was changes in the prefs of mousewheel as a result of the implementation of the DOM3 (Bug 719320) scrolling mouse wheel.

  I don't think that it is possible to replace / adjust the amount of scrolling when you use a modifier key for a certain number of pixels.

  There is only the delta multipliers that change the number of lines (33 changes scrolling amount to one-third), so probably closed you can get is to assign the action to the modifier Alt 1 (or 1% of the default).

  You can change mousewheel.*.delta_multiplier_y prefs (vertical axis) to change the vertical scroll amount.

  • MouseWheel.system_scroll_override_on_root_content. Enabled-> true
  • MouseWheel.with_control.delta_multiplier_y