BlackBerry Q10 I reset my router completely - now everything can connect * except * Q10

Similar Questions

• Unable to connect to my walkman account. Misspelling, now I can connect

  I just created a walkman account yesterday.  Everything works fine except when I try to log in.  I can't remove it the comments so I'll just say I know why I could not connect.  Spelling error.  I tried several combinations of my e-mail with my password & now I can connect.

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  Looks like you are trying to connect to Unlimited Music with your account-SEN. If you encounter any problems with your account, I suggest you contact Sony Entertainment Network for further assistance in this matter:
  http://www.sonyentertainmentnetwork.com/en-GB/support/contact-us/

• I have reset my etec router and now I can not past the prompt 192.168.1.1. My pc is 8 years old and very, very slow

  I tried for two days now to restore my internet connection.

  I tried for two days now to restore my internet connection.

  192.168.1.1 is probably access your router's IP address and it could be a Linksys.

  If you reset your router, we help can'r you. You will need to access the router and configuring PPPoE username and password.

  Call your service provider.

  Why in the world would you reset your router if you didn't know how to put in place a new or know what to do then? It's like taking something apart and not knowing how to wind again.

• Router WRT160N - Macbook Pro can connect but not Internet

  For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.

  My mac has always been able to connect to other wireless routers. My router is the latest firmware.

  I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?

  If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...

  In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Adjust the settings on your router wireless-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  If you have a second see computer/laptop wireless if it connects to your wireless network of...

• Failed to sync to blackBerry Smartphones. Message "unable to complete request. Can you help me

  Hello

  This is my first post. I have a BlackBerry 8310 that worked perfectly until today.

  Question: I had not synchronized for a few days. When I connected today, sync seems to be going smoothly until I got the message "Failed request complete" (in Windows Intellisynch).

  I restarted my desktop and BB many times and still the same error message.

  The only different thing I can think is that I installed Microsoft Messenger today. I uninstall, but synchronization that PB is still there. My office is a Compaq Presario with Windows XP.

  Any help much appreciated!

  Thank you

  Sophie

  PS: I did my due diligence and search the threads on the error message, but can't find any solution.

  Hi and welcome to the forums!

  You need to reset your configuration options in the Synchronization Wizard.

  The attached link is a reference to your error message.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB13998&sliceId=2&docTy...

• I have istalled security code on my router and now I can't print.

  I recently put a password on my router, thinking that my broadband was stolen. Printer dosent my work now, and the router does not recognize that it is on the system.

  OK, you will need to re - install the printer.  If you have Windows you can go to start > all programs > Hewlett-Packard > [your printer model] > add a device.  Add a network printer or wireless when it asks.  You may need to temporarily use a USB cable to connect the new network settings on your printer.

• Changed router and now I can't print

  BT have changed my router.  I use a Mac 10.9. My printer is an officeject 4620. It worked fine before the change in router. I can print to the printer itself, I can print using the HP software (but it ask me to enter the IP address and then enter the router password) but cannot print from any software, that is to say the word. I don't get an error message and the computer seems to try and send it to the printer, but it does not. Someone at - it ideas?

  Hi lynneseymour,

  Welcome to the HP Forums!

  I read your post about not being able to print wireless from the evolution of your router, and I'd be happy to help!

  With regard to the new router you use, what's his name, and model number? How far is the router of the printer? There is a parameter called "Multicast" router, and it must be enabled for printing from a Mac.

  To connect the printer to the new network, you will need to restore the default network settings on the front panel.

  This can be done by following these steps:

  (1.) by clicking on the key icon on the lower part of the front panel

  2.) click the arrow on the button down to network and press Ok

  3.) scroll down to wireless settings and then click Ok

  Scroll 4) to the network by default and press Ok

  5.) click Yes and the default network will be restored

  Then, the printing system needs to empty the old print queue. To do this, follow this document about the reset printing system.

  Do not click on the button to add another printer, the next step is to run the HP installation wizard to perform an automatic wireless connection.

  The next step is to run the HP Setup Assistant to start an automatic wireless connection with a usb cable.

  Follow the steps under "optional: I installed my printer... to move to a wireless network connection" to install the software of the printer for a wireless network connection.

  I will be looking forward to meet you and thank you for visiting the HP Forums!

• I had a change in router and now I can not connect wireless network printer

  HP Deskjet 3050 has

  Windows 7

  I got a router change and now can not conect my printer on the wireless network. What should I do?

  Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

  All the best.

• I got a new modem and the router and now I can't print wireless.

  I have a Photosmart 8450 printer.  My operating system is Windows7.  I tried to follow the Scan doctor, but I guess I'm not tech savy enough to understand.  It worked fine before the new modem and the router.  She is 'offline' and I can't understand how to put line.  Thanks for any help and easy enough for me to follow.

  Hello raedene715.

  Thanks for the transcript, it was useful.

  Please, check the network cables and connections (side of the printer and router). If possible, try a different network cable.

  See you soon!

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• I reset my router, now my two wireless printers will not print wireless.

  I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router.

  I have a different brand printer that works wirelessly now.  I don't understand why HP printers attached to the network.  Printers are c4780 and 4500.

  I tried your solution but still could not solve the problem.  I called HP support.  After a few minutes they determined that since it was an old printer and I recently updated my software on the computer and did a upgrade to the router, when I reset the router was not compatible with my printer.  They also suggested that I try with an old computer,.

  So, I ordered a HP OJ8600 at a great price and will move the printer on another computer.

  So Bravo are so your information, even if it was my fault for failing to provide more complete information, and given that the printer works somewhere else and I have a compatible printer on the way, I consider that this problem is solved.

  Thank you very much for your help.  I appreciate it.

• tried to re set now I can't get past a loading error "the proxy server refuses connections."

  I tried the "reset Firefox" button and now I can't get Firefox it loads. Get error "the proxy server refuses connections." I'm not on a LAN, just a computer at home, how can I fix?

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• BlackBerry Q10 data wipe complete, now the options for specific contacts in his text...

  After a number of issues with my contact lists of duplication, overlap and texts sent in duplicate, level 2 at verizon support has me do a data wipe that solved the problem. now I can't make a sound, specific text for contacts. the option disappeared completely. any fix for that? Thank you!

  Hello Nancyragazza

  In blackberry 10 do not always have the possibility of placing a tone notification for each contact, in this case, we expect the launch of OS 10.2 list official and which will be accompanied by many improvements and new features, as well in other applications.

  Kind regards.

  Bravo * don't forget to give to these people who help and advise you about your questions * Can
  Accept as Solution to * comment *.

  @gutijose14

• BlackBerry 10 like the Q10 and now want to buy a bunch of Fitness that I can connect to it...

  I recently got the new phone of Q10 - classic keyboard with touch screen.  Best of both worlds.  I like it.  Past iPhone to BB.

  Now, I want to get a fitness tracker that I can pair it with my phone.  I'm setting things to have android on BBQ10, but do not seem to have the ability to download Amazon Apps Store.  What are my options here in the purchase of an adaptation of the band I have with my new phone?  I don't like really what group is - I want just that he could pair up with my phone.  Help!

  Hi @charlesz1972

  If you use BlackBerry 10 OS version 10.3 or later, I can confirm that the bands of Fitness such as Fitbit Flex that uses Bluetooth Low Energy are supported. I use a Fitbit Flex myself with the Fitbit app that I've been able to install since the Amazon Appstore. Thank you!

• Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Hi, Rlayhee,

  Printer brand/model?

  Start > Control Panel

  Select the Printers folder

  Right-click on the printer icon, then select open

  Are there pending print jobs

  If Yes, click on file > cancel all Documents

  Close the print queue and the printer folder

  Try printing again

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printer (if any)

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Restart the computer to Windows to reinstall the drivers

  Go to the manufacturer's website and search for driver updates

  Try printing again