BlackBerry Q5 carrier bbm blocking on the WiFi connection?

Similar Questions

• BlackBerry Smartphones BB Curve 9300 - how to prioritize between the Wifi connection and the carrier?

  Hi all, I have a question... How do we place on our BB unit to plug into a wireless network from first (if available) to browse and not them connected to the internet all the stuff instead of using our carrier, then at home or at work?

  There are no parameters for this on most devices, the WiFi connection will ALWAYS be priority for communication of data via the connection to the mobile network.

  Some rare machines with capacities AMU have an Option to set this priority. UMA is a service of only a few mobile providers like Tmobile.

• I've never seen the cloud on my watch symbolizing the wifi connection.

  I've never seen the cloud on my watch symbolizing the wifi connection. How to operate when phone and shows are on the same network?

  Hi, Kristian

  If your Apple Watch is not connected to your iPhone via Bluetooth, but it is within range of a WiFi (2.4 GHz) network your iPhone plugged in the front (while it was connected to your watch via Bluetooth), then your watch can connect to this network and still offer some features:

  • How to use your Apple Watch without your iPhone in the vicinity - Apple Support

  To check the status of the connection of your watch, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
  • Slide down again to return to the watch face.

  To test whether your watch is currently able to connect to a Wi - Fi compatible network known as a relief:

  • When within range of the network, turn off Bluetooth on your iPhone.
  • After pausing for a short time, check the status of the connection of your watch as described above.

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• What will I do if the wifi connection is interrupted during the update the new os 9.1

  I already download the new ios 9, but unfortunately the wifi connection and the update of the icloud setting was not able to go forward, what I'll do then its keep on update

  Try to hang the iPad to a computer and see if you can continue installation using iTunes.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• FP 6700: Hp 6700 loses the wifi connection

  Guard 10 Windows printer Hp 6700 lose the wifi connection that requires powering off the coast of the printer running and the cable/modem.  I tried the suggestion given in the forum, but does not solve the problem. The printer is located in 2 feet of cable/modem D5001 model pace and I have the latest software and firmware installed.

  Anyone have any ideas on how to solve this problem.

  Thank you.

  Move the 6700 further pace or connect an ethernet cable to the rhythm of the 6700.

• ConnectionFactory cannot create the WiFi connection

  I tried this code example, and it returns null ConnectionDescriptor when I only have the wifi connection:

  cf = new ConnectionFactory();
  cf.setPreferredTransportTypes(new int[]{
      TransportInfo.TRANSPORT_TCP_WIFI,
      TransportInfo.TRANSPORT_TCP_CELLULAR,
      TransportInfo.TRANSPORT_WAP,
      TransportInfo.TRANSPORT_WAP2,
      TransportInfo.TRANSPORT_MDS,
      TransportInfo.TRANSPORT_BIS_B
  });
  cf.setAttemptsLimit(2);
  cf.setConnectionTimeout(10000);
  ConnectionDescriptor descr = cf.getConnection("http://www.google.com");
  StringBuffer buff = new StringBuffer();
  if(descr == null){
      buff.append("no descriptor");
  }else{
      buff.append(descr.getTransportDescriptor().getTransportType() + ";" + descr.getUrl());
      try {
      descr.getConnection().close();
      } catch (Exception e) {
          System.out.println("===>conn close error:" + e.getMessage() + ";" + e.getClass().getName());
      }
  }
  

  I tested with the mobile network and it works well and returns the connection descriptor non-zero but when I try with the wifi only and always returns null.

  I tried to access Google.com on the bb browser and it opens.

  However, the connection is slow and it loads for a while before opening google. Is this the reason why I get null handle or its something else?

  Well I solved it.

  It turned out that I had activated the VPN profile to the wifi network. When I disable the code works ok.

  But this raises the question why can't make a connection http via wifi with active VPN profile. I can always open google.com in the browser.

  I'll make a new thread for this question.

• BlackBerry Smartphones use Storm 2 as PDA WiFi-Connected (without telephone service)?

  RESOLVED:
  See the second post in this thread for the solution (thanks to wiggler forum member)

  ORIGINAL MESSAGE:

  [I know I am a "retarded" for even bringing this place, but we'll just go beyond the part and talk about what I really want to know here ]

  My wife and I went to an Android (Bionic) for me and an iPhone (4 s) for her. However, his old phone (Storm 2) has recently been replaced because his former 1 storm went wrong on her... and now, since my father thought finally get something to replace his old (not to mention, broken and unusable) Palm device, we thought we might as well give him the Storm 2 and see if it'll work out for what he wants.

  Here's the deal about my father and his PDA... already has a cell phone, so he won't move up to a smart phone, because he does not want to pay the extra money every month just to get a PDA phone when he probably never really use the data service much and all that.

  He wants a phone just to be a phone, and he also wants a PDA... just for the PDA part.

  So, I thought, very well... If he is not willing to move completely in the modern era, then we can at least give him something he can synchronize with Outlook (it works... I already tried) to have its calendar and contacts with him all the time (which it is not able to do with his simple mobile).

  So what I know is that it's possible, at least in a very limited sense... I have the Storm 2 sync with Outlook.
  However, here's my problem... for a reason, even if the wifi card appears to connect to the wifi here in their home access point, it is not actually get an IP address and can't get out on the internet with the browser integrated into all.

  My question is this...
  Is it because it is not possible (i.e. RIM has configured to disable the card wifi within the unit while there is no mobile phone service connected), or who should run, and I should watch more in the sense of something wrong at the level of the home network?

  The reason why I think that it could be something awkward like that within the device itself, it is my new Android and iPhone of the wife are able to connect to the network wireless home here very well.

  Sorry for such a long thing, goofy needs help, but I thought it is a good starting point. If anyone has ideas and is willing to help, please chime.

  p.s. I am a computer scientist. So I have that aspect covered... at least you do not work with a complete * beep * if you jump here.

  I thought about it. I did a search on google for the specific message I saw in 'wi - fi tools' (which was "no longer valid"ip address ") and found this thread...
  http://supportforums.BlackBerry.com/T5/other-BlackBerry-smartphones/IP-address-no-longer-valid/TD-p/...

  The second post there (from wiggler), gave me the fix I need.
  Thank you!  :-)

• Setup for WIFI calling on the iPhone 6. Cellular data off the coast. Why still increment minutes on cell when outgoing calls over wifi?   How can I prove that I actually use wifi?    I tried to turn airplane Mode to isolate the wifi connection only, howev

  When you use the wifi calling, cellular minutes incrementing always?   WiFi calls = wifi = data cell = off

  Also tried to turn the airplane = mode on. How to track where call is go wifi or cell phone?

  Thank you

• Satellite L500 - how to set up the WIFI connection?

  I'm having all sorts of dramas trying to get my new L500 connected to the my Wi - Fi. Receipt the run around of Telstra Bigpond, then Microsoft who are charging me $80 only to tell me that I have to contact Bigpond...

  After talking with Bigpond they advised that I need to "configures Intel PROSet / Wireless" because it prevents me to connect to my Bigpond connection...

  Can someone throw some light/provide any assistance! I'm getting desperate :(

  Thanks - my email is [email protected]

  Hey nic,.

  You must give us more details about your problem. Your explanation is very deep and so it might be a little hard to give exactly the instructions how to resolve you this problem.

  First you make sure if your wireless network card is listed in the device correctly without yellow exclamation point Manager.
  Then, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  You see the WLAN router if you are looking for WIFI networks at your fingertips? If so, can you connect or you get an IP address?
  Also check the DHCP of your laptop configuration and disable the Save function in the energy WLAN Vista power management.

• Skype 6.16.60.105 drops after that call is place/received the WiFi connection

  Hello

  After the upgrade to the latest version ov Skype (6.16.60.105) - I can't not place/receive calls.

  When I call someone (call or video call) or when anobody calls me - Skype drops my WiFi connection.

  It was working fine before the update.

  On the same wifi network, another laptop with Skype 6.14 works very well.

  Regression problem?

  Any solution?

  Thank you

  Oleg.

  Downgrade from 6.16.0.105 solved the problem. I've done various tests and it works very well.

  So, it should be regression introduced along the road between 6.16.0.105 and 6.16.60.105.

  I wonder if Skype developers know.

• HP 15-AC044TU: how to enable the wifi/connection wireless network in my laptop HP 15-AC044TU win-7 64-bit

  I can't activate the network wifi/wireless connection on my laptop HP 15 - AC044TU win-7 64-bit. I found no adapters wireless network / wifi drivers on the hp site. where can I find it? the key that is used to toggle the wifi?

  Please solve my problem FSA.

  Thank you.

  Hello:

  You need these drivers for W7 wireless and bluetooth for your model...

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• Satellite M50 161 - how to set up the WIFI connection?

  I use my Satellite as a second computer. My PC is primary and is using a NETGEAR card.

  I used a card reminder in wireless cards because my home office is a bit far from the PC.

  Of course, my laptop has its own part of the ways to get online.

  I've always taken for granted connection. I don't even remember the 1st time I am connected. In fact an engineer could have done to the delivery!

  PC had problems connecting. Host Web server problems. I was expecting sort of my laptop to connect in any case, as it could / should connect to it's own wireless installation to get online. I'm not an expert as you realize.

  It dawned on me while I had no idea how to switch on and connect using the built-in wireless card that not Netgear obviously. Or I'm expecting a lot and the lap top is actually a slave to my PC connection and always will home in on the netgear connection.

  BTW, I'm back online via the netgear but would like to know. Excuse my ignorance...

  Hello

  To be honest I m a bit confused.
  I put t know exactly what you want to do.

  You want to connect the laptop to the other PC via WiFi or connect the Satellite M50 to the WLan router as usual?

  If you want to connect to the Wlan router and then activate the wireless card on the laptop with the WLan switch on the side of the laptop and the FN + F9 key combination.
  Then configure settings such as the SSID, encryption, Mac address, etc. by using windows has the configuration settings or 3rd party software like utility Intel ProSet or Atheros client utility (depending on the Wlan card).

  For more details you can visit the Toshiba Wlan Portal
  http://APS2.toshiba-tro.de/WLAN/

  concerning