Satellite L500 - how to set up the WIFI connection?

I'm having all sorts of dramas trying to get my new L500 connected to the my Wi - Fi. Receipt the run around of Telstra Bigpond, then Microsoft who are charging me $80 only to tell me that I have to contact Bigpond...

After talking with Bigpond they advised that I need to "configures Intel PROSet / Wireless" because it prevents me to connect to my Bigpond connection...

Can someone throw some light/provide any assistance! I'm getting desperate :(

Thanks - my email is [email protected]

Hey nic,.

You must give us more details about your problem. Your explanation is very deep and so it might be a little hard to give exactly the instructions how to resolve you this problem.

First you make sure if your wireless network card is listed in the device correctly without yellow exclamation point Manager.
Then, make sure that the WIFI is enabled with the hardware switch and FN + F8.

You see the WLAN router if you are looking for WIFI networks at your fingertips? If so, can you connect or you get an IP address?
Also check the DHCP of your laptop configuration and disable the Save function in the energy WLAN Vista power management.

Tags: Toshiba

Similar Questions

  • Satellite M50 161 - how to set up the WIFI connection?

    I use my Satellite as a second computer. My PC is primary and is using a NETGEAR card.

    I used a card reminder in wireless cards because my home office is a bit far from the PC.

    Of course, my laptop has its own part of the ways to get online.

    I've always taken for granted connection. I don't even remember the 1st time I am connected. In fact an engineer could have done to the delivery!

    PC had problems connecting. Host Web server problems. I was expecting sort of my laptop to connect in any case, as it could / should connect to it's own wireless installation to get online. I'm not an expert as you realize.

    It dawned on me while I had no idea how to switch on and connect using the built-in wireless card that not Netgear obviously. Or I'm expecting a lot and the lap top is actually a slave to my PC connection and always will home in on the netgear connection.

    BTW, I'm back online via the netgear but would like to know. Excuse my ignorance...

    Hello

    To be honest I m a bit confused.
    I put t know exactly what you want to do.

    You want to connect the laptop to the other PC via WiFi or connect the Satellite M50 to the WLan router as usual?

    If you want to connect to the Wlan router and then activate the wireless card on the laptop with the WLan switch on the side of the laptop and the FN + F9 key combination.
    Then configure settings such as the SSID, encryption, Mac address, etc. by using windows has the configuration settings or 3rd party software like utility Intel ProSet or Atheros client utility (depending on the Wlan card).

    For more details you can visit the Toshiba Wlan Portal
    http://APS2.toshiba-tro.de/WLAN/

    concerning

  • BlackBerry Smartphones BB Curve 9300 - how to prioritize between the Wifi connection and the carrier?

    Hi all, I have a question... How do we place on our BB unit to plug into a wireless network from first (if available) to browse and not them connected to the internet all the stuff instead of using our carrier, then at home or at work?

    There are no parameters for this on most devices, the WiFi connection will ALWAYS be priority for communication of data via the connection to the mobile network.

    Some rare machines with capacities AMU have an Option to set this priority. UMA is a service of only a few mobile providers like Tmobile.

  • How to set up the 3G connection with "optus" on Portege Z30 - has PT243E

    Hello;

    I'm trying for several days to set up my 3g connection / 4g with my sim card "optus, but I don't not each time."
    I downloaded 'toshiba wireless manager', but my computer does not detect my card.

    Anyone have a solution?

    Thank you

    Try this:

    Remove the SIM card while the device is turned on.
    Then stop it completely, insert the SIM card yet again, and then turn on the laptop with SIM card inserted.

    Then follow this instruction step by step to make the 3G connection:
    How can I configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager?

  • Satellite 4100XCDT: how to set up the monitor

    Hello
    I recently bought a Satellite 4100XCDT, he had no operating system, so I installed Windows 98 Second edition on it. I installed the audio driver and the graphics driver and they work fine, but I can't configure the monitor. Whenever I start it detects TWO monitors plug-and-play for some reason any. I can't see a driver on the Toshiba site and don't know what to do. I tried setting up as a Billboard Mobile, but failed.

    I hope someone can help,
    Thank you.

    Hello

    On the download from Toshiba site there is display driver for Win98SE (version 6.45.5441 - 58.22). Try to use it.

    http://support.toshiba-tro.de/tools/satellite/s4070-90-100/Windows-95-98/Windows-98/display-Win98-64554415822.zip

    Good bye

  • Satellite A105: How to set up the Toshiba control buttons to start iTunes

    I have an A105 satellite comes with windows XP media center is installed. I decided I like to format and put on xp pro.

    Now that I made the switch that I can't get the buttons cd player to control iTunes.
    Before I went to the OS versions, I changed the properties of controls Toshiba - tab buttons to launch Firefox and iTunes.

    Doing so somehow meant that if I was running iTunes and I hit the button to stop the music would stop, etc.
    Now that I have reinstalled the drivers for controls and changed once more the values by default Firefox and iTunes, they both launch when I hit the internet button or when I hit the music button.

    But now, if I'm listening to iTunes and I hit the pause button or the stop button, it launches windows media player!
    If I hit. < or="">>| nothing happens at all.
    I was happy with the way he behaved previously.

    Can anyone help?
    The only option it gives me for audio controls CD is windows media player. Can I change a file somewhere to change this?

    I assume that you have changed the settings only in the button tab, the properties of controls on Toshiba.

    I think you should check the settings tab in multimedia applications.

    Check if it of possible to change the settings in the audio CD command.

  • How to set up the WiFi Windows Vista

    Title of the Moose: pensioner frustrated

    I have the O2 broadband & router, a laptop HP Vista Home Premium and now a Canon Pixma MG6150 printer. I am trying to set up wireless printing and the printer asks me for the WEP consisting of 5 to 23 characters; but on the router, the specified WEP key is a letter and 9 our thought to temporarily use the Ethernet cable (provided with the router) to connect the laptop and printer - would this work? Otherwise, no help here please?

    Hello

    I suggest you check out the link below to set up a wireless router in Windows Vista.

    Set up a wireless router

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

    To choose a network locations see the link below:

    Choose a network location

    http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-a-network-location

    You can also check:

    http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

    If you are not able to find wireless networks, then check out the link below to fix the problem.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

     

     

  • Satellite Pro A210-1AZ - I lose the WIFI connection for no apparent reason

    I am connected to a wireless network with my A210-1AZ. There are 4 wireless networks in my area, belonging to other people on my street. I connect to my network, and everything seems to work fine...

    Up to an hour, I just lost the connection without apparent reason. I click on the ' Connect or disconnect ", and he cannot find + all + 4 wireless networks. I press refresh - nothing. I go to Device Manager, disable then re-enable the best to the wireless network device. Can I do "connect or disconnect", and it shows all 4 networks back. If I connect... for another hour... then I have to do it again.

    It seems worse when I use the network a lot, that is to say. Download large files, sometimes after 10 minutes. If it is fairly inactive, it lasts not more. But it always happens in an hour or two.

    It becomes really annoying!

    Please do BIOS update to the latest version. The problem should be solved.
    By the way: card WLAN that is listed in the Device Manager? Intel or Atheros?

  • Satellite A100 - after only 15 minutes the WIFI connection is lost

    Hello.

    I have a Satellite A100.
    Well whenever I connect to a wireless network, after 15 minutes or if my connection is lost (each time) and I have to reconnect.
    Also at this time my network icon is spent hence time is.

    What can I do?

    Hello

    You should try to update driver wlan:

    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Read this number for more information:

    http://APS2.toshiba-tro.de/KB0/FAQ84025B0000R01.htm

  • Satellite L10 - 195 - could not get the WIFI connection to the internet

    Hello

    I downloaded and installed the latest dirvers for wireless cards and EThernet for my laptop but I can not get the wireless to connect to the internet!
    Please help me before I crush my laptop. :]

    Thanx

    PS: Anyone know if there is one special way (other than the function keys) to swith the wireless on?

    Hello

    This may be a stupid answer, but on my laptop there is a switch on the front of the laptop that needs to be enabled for the wireless work. I saw this as a first step, and it doesn't seem to be well documented. Good luck.

  • How to set up the multimedia keys (only the last 3 buttons)

    Hello

    How to set up the multimedia keys (only the last 3 buttons)? The first button works, you open the browser and the other open WMP.
    But the last 3 buttons (play/pause, Stop, forw/rewd) aren´t work with WMP. How can I fix?

    Thank you

    Hello

    Can you please tell us what model of laptop Satellite A do you have?

  • How can I set up a wifi connection?

    Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

    How can I set up a wifi connection

    Hello jamesjones882

    Please see the link below for setup of wireless networks. Thank you.

  • How do I get the WiFi hotspot neighbor list and configure parameters programmatically using WiFi

    I develop for BlackBerry 10 devices and here's my requirment applocation

    1 extract the list of neighbors WiFi hotspot.

    2. get the WiFi connected details (bandwidth, the name of HotSopot etc.)

    3. change and set up the WiFi device programmatically (not manually by the user of the device settings)

    For the details above is it possbile to develop applications using html5 or it required native SDK only?

    If someone possbile please provide some technical details how reach aboe task.

    Thanks in advance.

    I would never recommend something else of the native, take a glance has the lib of wifi service, may be of some use.

    https://developer.BlackBerry.com/native/documentation/device_comm/WiFi/cascades_wifi_overview.html

  • where can I get advice on how to set up the iPad for a partially sighted person

    Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

    Paul,

    Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  • How to set up the password disk HARD on Equimum L40-141?

    Hello

    Can someone tell me how to set up the hard drive on my laptop password above please?

    Thank you
    Jane

    Hello

    Have you checked the settings in the BIOS?
    My BIOS contains an option for the HARD drive password parameter.

    But just a question; Why do you want to set the HARD drive password?
    Is this really necessary?

    You need to know if the HARD drive has been fixed, and that something will go wrong, I mean that if you would forget the HARD drive password, the HARD drive would be locked and is no longer usable.
    So be careful with this password if you want to know my opinion; Don t pay.

    Welcome them

Maybe you are looking for

  • I used Microsoft for years.  How can I use my files and store and add to them with the I mac

    I used Microsoft for years.  How can I now access my stored info and edit and add to my files with my Apple I Mac. Having problems to work with files in the mac I used microsoft years how can I access my stored info and edit and add to them on the Ma

  • Satellite A50-522 - how to remove BIOS password?

    Hello I have a Toshiba Satellite A50-522 of Spain and there a startup password.How can I recover the password? Or how can I reset the password to start? Thanks in advance!

  • Why is my imac printing docs pdf with squares instead of text

    I use OS X 10.9.5. When I want to print a pdf document was sent to me from an external source (for example, my electricity bill) the document is printed with squares where the text should be. Sometimes if I get an overview of printing, it will look O

  • Problems with disk Satellite pro 4200 hard assembly

    I have problems with a Satellite pro 4200.The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possib

  • Upgrade memory on the Satellite L300

    I bought a L300 satellite in August 08 in Australia. It came with a single module of memory 1 GB which is now inadequate.I got 2 x 2 GB modules but cannot make it work with the two climbs. Reports of the mounted but 4 GB Vista BIOS restarts the first