Rear camera / flashlight has stopped working

Similar Questions

• BlackBerry Smartphone camera Zoom has stopped working - trackball does nothing. Very strange loophole.

  I just take a photo using my Curve 8900 still shot camera feature.

  Normally moving the trackball to 12 o clock position zoomed out a bit

  and he moving to position 6 oclock zooms back to 01:00 x

  But today, I noticed that it works at all.   The trackball works perfectly for scrolling up and down in menu lists.

  Also, it works correctly in all directions when you zoom an existing photo.

  It's just that the zoom feature when aiming a shot to take the picture just stopped working.

  What it is on the resolution makes no difference.  I have mine Superfine value and 2048 x 1536 pixels and Flash and the White Balance both the Automatic value.   I can not even a replacement for zoom as Z touch which is not bringing the function.

  Can stop working in the camera, trackball but work in other applications?

  I'm mystified by it.

  Hope someone knows what is happening here.

  --

  Plado

  Dear Plado (that's me!)

  Have you tried the phone then next turn once again as in a reboot of the switch?

  Yes I tried, but it made no difference.

  Have OK you tried to turn off and take out the battery and do a boot cold?

  No, but I'll do and see if it makes a difference!

  Doing a job?

  Yes he did, and the zoom is now working again and has a level of zoom of 1.0 to 2.0 in increments of. 25 x.

  Well I have never! Who would have thought it?

  I'm still none the wiser as to why he needed a cold start or why he's stuck without prompting me.

  It's just one of those things. A kind of BLOB, with eyeballs that palpitate, just one of those things!

  So thank you to all those who felt as you respond to this, the problem is solved, but I still want to know why it stopped working.

  --

  Plado

• QuickBooks 2001 Version has stopped working Windows Vista

  Two days ago, when I tried to open Quickbooks 2001 (I have Windows Vista), a pop up came 'QB has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I closed the computer and several times tried to open Quickbooks without success and have not received a report from Windows.  You have suggestions or reasons why this is happening as I can't use my accounting program at all.

  I use not Quickbook.
  Found this on the web...

  http://EzineArticles.com/?QuickBooks-and-Vista---not-all-versions-of-QuickBooks-are-compatible-with-Vista&ID=331771

  Excerpt:

  Only QuickBooks 2007 and newer versions, are compatible with Vista. Intuit announced on 16 October 2007, investigating third party workarounds for QuickBooks users who use older versions of QuickBooks. However, no other details were given.

  This means that any version of QuickBooks before 2007 is not compatible with Vista

• Web cam has stopped working and is no longer in Device Manager

  on my inspiron 1420 dell webcam has stopped working. I have not found in the Device Manager.
  

  Also, which could be connected, when I start a box opens indicating this device A USB is not recognized - but there is no connected device.

  any help?

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Look here:

  Reload the drivers of web cam and the enforcement program web cam dell downloads for your inspiron 1420.

• BlackBerry torch Smartphone camera has stopped working

  Unit has stopped working, but the video camera works very well - had the phone for 5 weeks.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  Try again

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• import of vio - pov cam divx files hangs: "COM surrogate has stopped working".

  Windows vista 64 4 GB of ram, 2.1 mhz

  First elements 9

  Import divx .avi VIO pov camera file blocks adobe PE9 with message: COM surrogate has stopped working.

  If I uninstall divx then PE9 won't crash, but only audio is present.  VIO said correct codec must be obtained from Adobe.  Is there a fix for this so that my $100 is not lost?

  Unfortunately, DivX and Xvid are not well taken in charge, or not at all. Some have had better luck with pre 9.0.1, but they are few.

  In order to ensure that things are as good as they get, I follow the steps described in this ARTICLE and also make sure you have the latest version of the DivX CODEC installed.

  Of CyberLink PowerDirector seems better to work with images of DivX, than does any program Adobe NLE.

  Good luck

  Hunt

• ThinkPad E520 - camera has stopped working

  Hello

  I have been using the utility of Communications (Lenovo - Web Conferencing) when I bought the laptop a few months ago, everything was fine. But now when I press F5 (shortcut key for camera options) there is a pop up with massage "Utility Communication UI hand has stopped working".

  Everything is fine in Device Manager.

  Is this a hardware problem? Is there a way to check?

  Surgeries wrote:
  Hey, Ante.

  try to install the utility of communication as well as pilots of the unit; Then go to http://support.lenovo.com - download both software and reinstall.

  It's the first thing I did, and it did not help.

  After some troubleshooting I finally decided to use Windows Recovery - restore the system to an earlier time, I went up to what worked Communication Utility (camera). I had save steps 3 and 4.

  I think that the problem happened after I uninstalled a few programs of Lenovo ThinkVantage (Toolbox; Power Manager and access connections).

  I hope this helps someone...

• LifeCam Cinema - LifeCam.exe has stopped working

  Just got a new webcam MS LifeCam Cinema that I ordered, but unfortunately, the software crashes.  The question is not the device itself, because I can see the video in the video settings Live Messenger window, and the test microphone also works.  However, whenever I try to run the software LifeCam itself, I get the pointer for a second, and then it crashes and I get the message "LifeCam.exe has stopped working".

  I am running Vista Home Premium SP2 x 64, completely up to date with windows update.  I uninstalled the driver from the CD and it redownloaded go web site (did not work).  I checked all the posts on what I could find, the most common suggestion was to uninstall the Nero software, but I don't have any Nero software installed.  Any help to get this thing to run would be really appreciated.  I want to especially this for video recording, to get the LifeCam program to work is essential.

  How many other USB devices attached to this machine?  Are you using non-powered for connection hubs?  I assume that you have already tried to connect to a different USB port on your computer?  Rear ports are better than using all the front ports on most machines (due to wiring and connections, I think).  If you change the Windows ports will really rediscover your hardware and quickly (without downloading) reinstall drivers current.

  Microsoft hardware
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=H5D-00001&OS=WVista_3264&lang=en

  Here is the software available for your product. Follow the link to download.
  "The LifeCam 3.2 32-bit and 64-bit for Windows Vista

  "See the Readme of the LifeCam software

  "Download the update of Firmware for your LifeCam Cinema

  Something useful in the Readme, and did you also update the Firmware?

  For what it's worth, it's only about a week ago when I was offered and downloaded updates via Windows updates for my LifeCam camera.  That always seems to work correctly.

• Auto orientation has stopped working?

  Hi gang,.

  I have a pretty simple application, for the most part QML with class a little c ++ support.

  It worked well, yesterday evening, but it seems that the application has stopped Auto Guide.

  Orient is located in the bar of file descriptor.  However, the application will run out of portrait.

  I do not force orientation anywhere, and this used to 'work' (tm).

  I use the camera in my application, and it is has some debug output that looks like that one car guide...

  The rear camera unit is accessible.
  PpsTimeSettingsObject::newSettingsData() emitted
  NavigationPane: NavigationPaneOnFwdTransitionDone: emitting push transition ended for page: 12 client top: 12
  OrientationSupportPrivate::setSupportedDisplayOrientation: displayOrientation: CurrentLocked
  OrientationSupport::setSupportedDisplayOrientation(): Main application window not active, delaying orientation change until it becomes active.
  OrientationSupportPrivate::onWindowActive(): window now ready, retrying delayed setSupportedDisplayOrientation() call
  OrientationSupportPrivate::retrySetSupportedDisplayOrientation():  retrying delayed setSupportedDisplayOrientation()
  OrientationSupportPrivate::setSupportedDisplayOrientation: displayOrientation: CurrentLocked
  OrientationSupportPrivate::setSupportedDisplayOrientation: successfully changed to CurrentLocked
  OrientationSupportPrivate::setSupportedDisplayOrientation: displayOrientation: All
  OrientationSupportPrivate::setSupportedDisplayOrientation: successfully changed to All
  OrientationSupportPrivate::setSupportedDisplayOrientation: displayOrientation: All
  

  something else I can check or try to get the app autoorienting again?

  Thank you!

  J

  a few questions.  Is the only issue on 10.2?

  also have you changed any code since it has stopped working?  simple small camera untied errors can cause most of the functions of the camera to stop working. (Believe me, it's a pain)

  One thing you can try to do is create a new project and migration manually your code more, which can sometimes cause problems.

  In the code you posted I noticed that the orientation is set to locked.  The orientation of your devices is locked? You can also check the handle bar to see if the orientation is set to orient on the page 'request',

• Import media has stopped working

  All of a sudden my import media has stopped working.  I get the fine window, I select the video I want to import, the window closes, but the video does not matter.  Just before this happened he began to import some videos that I didn't, so I stopped the import process, transcode quit, etc..  So when I started to import the videos I want it only imported and copied one of the 5 but don't copy others 5 in FCP, just left them bound to the camera.  It's never happened before.  I have version 10.2.3

  Close the FCP X.

  Hold down the Option key as you restart FCP X.

  Create a NEW library.

  Try with your wanted clips import.

  Al

• Satellite T130: integrated webcam has stopped working

  Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
  I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
  Thank you

  Hi mate

  I have the same problem, sometimes using my U400.
  This happens if the room is dark for the camera.
  If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
  After that, the image of the webcam should come back again in my case it worked.

• Satellite Pro A300 - 2C5 has stopped working

  Hello

  I have a problem with my Toshiba Pro A300 - 2C5.
  It stopped working today.

  I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
  He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

  When I try to turn it on, the syptoms are as follows:
  -the only light that shines is a power indicator light
  -l' screen does not work at all (it stays black and went offshore)
  -fan works
  -It seems hard disk does not work if Windows does not start
  -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
  -computer does not read my camera memory card

  What shoul I do to get it working again? :(
  Any help appreciated.

  K.

  Hello

  The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
  In the best cases, it could be a RAM error as it happens to one of my friends.
  He spilled coke on the keyboard and after awhile the laptop could not turn on.
  We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

  You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.

• my Skype has stopped working

  I updated latest version of Skype and I use family vista premium, I can always connect but after a few seconds message appears on the screen of Skype has stopped working...

  Looks like you have successfully updated from Windows XP to Vista, but have not updated device drivers. They are virtually all versions of Windows XP. Try firat to update drivers:

  http://www.service.ASUS.com/#! downloads/c1wax

  In addition, uninstall application ASUS Virtual Camera, this virtual video capture device we know conflict with Skype.

  Also, make sure you have the latest version of IE9 Internet Explorer installed.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.