BlackBerry Smartphones BB suddenly not recognized by Mac

Similar Questions

• BlackBerry Smartphones BB Pearl not recognizing Media Card

  I have a Kingston 2 GB MicroSD card installed in my BB.  He works very well for the past month (since I have the phone) and has 4 or 5 images and 5 another 6 ringtones stored on it.  Earlier this week, I had been hanging the phone to the computer with the USB cable and it would ask me if I wanted to access the media.  I would say no and continue on from there.  Then Wednesday, all of a sudden the BB began to no longer recognize the card.  Today, I went into the settings and they are:

  Map of media Support - on

  Encryption mode - no

  Mass Storage Mode Support - on

  Auto enable mass storage Mode when connected - invites

  A memory card is not currently inserted in the device.

  I take the media card and plug in the computer and it is still showing all the files there.  When I plug the phone to the computer, it is not recognized by the computer.

  Any suggestions?

  I found something Spingineer here (http://supportforums.blackberry.com/rim/board/message?board.id=8100&thread.id=11781) and tried.   It worked like a charm.

• BlackBerry Smartphones BBID ID not recognized

  I'm trying to set up an additional e-mail address, but when I try to access the set up menu, the BB tells me my username is not valid and must be at least 4 characters. I registered the username is my gmail address, which is a lot more than 4 characters. How can I access the menu set?

  See if you can do that by typing www.blackberry.com/integrate in the browser on your phone.

  Let us know if that helps you.

• BlackBerry Smartphones USB device not recognized

  My 7105t worked fine until a week ago, then my computer began to send the above message, in the subject line.  I have tried everything I can think of, including reinstalling the software, but nothing prevents the reapparing message and so let me sync.  I hope someone can help.  I use the desktop Version 4.2.1.8 with 4.2.1.9 Device Manager and BBDevMgr (two managers device somehow, is that a problem?), USB driver series 3.1.0.1, 4.2.1.11 and RIM 1.0.0.35 program application loader.  Curiously, when I try to repair thanks to add and remove programs, the computer (Windows XP) can not find the software, which I have reinstalled it using the default settings by it to find me. I am at the end of the roll and you will enjoy all the tips.   Thank you!

  1. remove the USB BB;

  Restart the PC and while it is powered, the battery on the BB, reinserting after a few seconds, and then restart the BB.

  Try everything again.

  2. make sure that your USB cable is connected to one of the main rear USB ports of the PC. A USB hub, or USB Monitor port not a USB port on the front of the PC.

• BlackBerry smartphones alert icon not recognized

  New at this location but recently downloaded the apps from my bb8900 world and since then, I have an alert icon which is an arrow towards the lower left circled.  ITO has the red/white asteriscs that shows you that this is an alert.  Someone can tell me what it is or means and how can I delete it?

  The notice says you have an application that you previously downloaded or purchased in App World > My World, which is ready for an upgrade on your device. Look there for the upgrade.

  To clear the notification on the screen, find the alert message in your main folder, read or delete it.

• Digital camera is suddenly not recognized by computer

  Digital camera suddenly not being recognized by the computer after a year, works perfectly, so I can now download my photos. I tried to reinstall the software of the camera, but says it's already there - not good.  What can I do?  If I need to uninstall the software and reinstall it, please tell me how to do it.  Thank you

  Go to the website of the manufacturer of the camera to get instructions to uninstal/reinatll software for their product.

  Or read this:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/uninstall-or-change-a-program

  Uninstall or change a program

  If the above does not solve it:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Ports USB suddenly not recognized

  I have a laptop with windows Vista on it and it came with 3 USB ports.  After doing some cleanup, defrag and that you back up all of a sudden none of them are recognized.  They appear in the Device Manager but not in the "computer" section  The wireless mouse does not work and our Ipod is not recognized, although it will load.  We did all kinds of update.  Have not uninstalled and reinstalled material... bit nervous about it and don't really know how to do it.  Good instructions on how to do it would be useful if that's what we need to do.  What should we do?

  Any help is appreciated.

  Hello

  Try a system restore to where the USB ports worked.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===================================

  If necessary:

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  For a laptop, using a real computer shop (no leeks and glances at a Best Buy or any other
  Department stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Scanner not recognized by Mac os10.9

  The scanner on my OfficeJet 7500 a is not recognized. I can't scan in the printer, or application preferences. I get the message "cannot open the session. However, I can scan Web page printers using webscan.

  And I can scan to a memory card printer, but the printer control panel does not recognize my computer. It print wireless, and it does not recognize my network to printing purposes.

  Y at - it anyway to get the software I need to get the scanner to run?

  I had this problem sporadically for two years and now the warranty has expired.

  Mac Mini (2012), 4 GB... OS10.9

  Hello

  Please check that the printers supported list and try the following fix:

  http://support.Apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  Kind regards.

• BlackBerry Smartphones Resettofactory does not BES

  The Bold 9900 was used with BES. Now, I like to use without BES, on a pop account.

  I used Desktop to factory. I used LOADER.exe compand line at /resettofactory.

  Nevertheless, after it restarts, and I try to add the POP account, I get.

  Accounts activated

  No active account

  Account activation

  To activate your business account, enter

  information provided by your system

  Administrator in the fields below.

  E-mail:

  Activation password

  View the password

  Activate

  Me doesn't appears not be factory because there is no place to add a pop account without activate BES.

  I just need to go to Yahoo, without BES. Any suggestions?

  Sourcery says:

  I also did a wipe of security directly on the phone. No joy.

  According to KB21918 and KB18998, you should eliminate BES.

  Actually no, both give a re-read, especially words such as these:

  The factory reset just as the option wipe Handheld performs from the BlackBerry smartphone, with a few minor differences.

  • Wipe Handheld - The wipe Handheld option is made directly on the BlackBerry smartphone (see KB02318 and KB14058). This option removes all BlackBerry application data (emails, address book entries, calendar of events, etc.) and allows the removal of installed Applications and the content of the press card.
  • Reset to the default factory - data Application will be withdrawn and HE are so political. Third-party programs will be NOT affected by this operation. They will remain intact.

  ResetToFactory, via the charger or desktop software, is the method to remove an it strategy. Reference:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, PAHO situation... which I think is that the device has been associated with BES before and is no longer. Once the it strategy is removed, then the unit must be ready to accept the carrier BIS account. You can check if the it policy has been removed through this:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If the company removed and only is offered for the e-mail configuration, then the problem is that the unit does not service the carrier BIS.

  To use the exclusive services of BB (including the ability to Push email, BBM, etc), you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have an email Push-enabled compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), your exclusive services BB will work (for example, you will have a staff/Internet Email added to the email Setup Wizard, your BBM will work, etc.).

  With hundreds of carriers in the world, each with dozens of different data plans it is impossible to say that any plan service could actually expressly provide for. Only carriers can answer this question. The best thing to do is to decide what services you want and then talk to your carrier about obtaining a data plan that allows what you want (to them).

  Good luck!

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• BlackBerry Smartphones Flashplayer will not update

  Hello

  I have a 9860 and he'll write update of the flashplayer needed to view you Tube videos.

  Any ideas of what I should do to remedy this would be welcome.

  Concerning

  Spragz

  BB SmartPhones do not support Flash, see this:

  • KB13156 Adobe Flash support for BlackBerry smartphones

  To use YouTube, you must use their mobile site:

  • m.YouTube.com

  Or get a 3rd party YouTube player app (there are a few AppWorld in).

  Good luck!

• BlackBerry Smartphones youtube does not not on 8320

  I bought used 8320... his t-mobile! When I bought used, and youtube worked! I think it was company cell phone with the it policy... I update its OS several times when I bought when a month ago when I refreshed his BONES... m.youtube.com stop working! I think that the video streaming is stopped working!

  whemever I click on the button look, nothing appears, not a single error!

  Please help me with this =]

  current OS: 4.5.0.81 (108)

  Hello and welcome to the community!

  First, take a step back...

  • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Ensure that all stages of the seller were already conducted, including correct cleaning of the BB of the it policy. From what you posted, which has not happened (the operating system does not remove the it refreshing policy).

  • KB18998 How to reset the factory default BlackBerry smart phone

  Good luck and let us know!

• BlackBerry Smartphones Opera4 does not work on my Storm 9500

  I installed on my Storm 9500 OM4, but when opening it shows ' the Mini Oper application attempted to access a network connection to low altitude. Here afford that?' twice and then the application does not connect to the internet. The phone displays 'edge' only. I don't have a BIS in my country.

  Hello

  One thing you left was how you have responded to the message you received. Did say you Yes or no? Twice?

  In any case, it may be that your BB, which I assume that you have purchased 2nd hand, did not properly prepare for your use by the previous owner. Please see the bulletin:

  • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  In addition, it is possible that they had this BB associated with BES and did not remove the it policy... Review:

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  Further still, your voice-level services work correctly? And you can find a WiFi network to see if Opera works that (as a test please)?

  Please let us know the results of your review of all the foregoing, accurately.

  Thank you!

• Sync gmail contacts OK blackBerry Smartphones, but can not synchronize Emails

  Dear Blackberry community!

  I recently changed my contract mobile and kept my professional Blackberry Curve 9300.

  I managed to configure gmail and synchronize contacts & the order of the day, but I can't seem to synchronize emails.

  It seems to me that the old configuration blocking private Email-addresses is still active, but I don't know where and how to change.

  Thanks a lot for your help!

  Cheers, Inken

  Hello and welcome to the community!

  Of what you say, I read that you had BES enabled on your BB, you have separated from the company/what BES now, but your BB was not properly cleaned of it's political, that continues to limit the things. To remedy this, you perform a specific wiping of your BB as follows:

  1. First of all, review the link of my auto-sig about backups... this process will completely clean your BB and you have to start over.
  2. Once ready, follow this KB to clean your BB of the it policy:
     • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings
  3. When / if you restore, DO NOT do a full restore, restore only those databases that are essential, especially to avoid those who have something to do with the company, BES, political, etc.. If you fail at this stage and all restore, you simply put it on your BB policy and be right where you started.

  Good luck!

• E-mail blackBerry Smartphones aol do not reach my "BOLD" blackberry 9900. has worked well before.

  For some reason some of my aol email is not pushed to my blackberry bold 9900.  Some are, and they take quite a long time.  any ideas?

  Hello Frank

  If you encounter a problem with the reception of e-mail, then try these steps in order:

  1 - Save your pocket computer.

  • KB00510 : How to register a BlackBerry smartphone with wireless network
  • You expect a registration messages in your Inbox messages.

  2 send your Service book

  • KB02830 : Send service for the BlackBerry Internet Service directories
  • (Wait an Enrollment Message arrives in your Inbox for each email that you have configured on your device)

  3. and then do a restart of battery like that pull while the device is powered on remove your battery wait for a min. then reinsert back

  After restarting, please check if it works.