Digital camera is suddenly not recognized by computer

Similar Questions

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.

• Ports USB suddenly not recognized

  I have a laptop with windows Vista on it and it came with 3 USB ports.  After doing some cleanup, defrag and that you back up all of a sudden none of them are recognized.  They appear in the Device Manager but not in the "computer" section  The wireless mouse does not work and our Ipod is not recognized, although it will load.  We did all kinds of update.  Have not uninstalled and reinstalled material... bit nervous about it and don't really know how to do it.  Good instructions on how to do it would be useful if that's what we need to do.  What should we do?

  Any help is appreciated.

  Hello

  Try a system restore to where the USB ports worked.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===================================

  If necessary:

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  For a laptop, using a real computer shop (no leeks and glances at a Best Buy or any other
  Department stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HDR HC3 be not recognized by computer with XP

  My computer does not recognize my camera which is a sony HDR HC3

  If the USB connection is not recognized, try the following steps:

  • Make sure a Memory Stick is inserted and recognized correctly by the camcorder;
  
  
  • Slide the MODE switch repeatedly until the PLAY/EDIT is on;
  
  
  • Value [USB SELECT] [Memory Stick];
  
  
  • Disconnect other devices to your computer;
  
  
  • Try a different USB port. If you are using a desktop computer, try the USB ports at the back of the CPU Tower.
  
  
  • Try a different USB cable, if possible;
  
  
  • Press the RESET button using a pointed object. The RESET button is located on the front of the lid of the cassette compartment.

  If my post answered your question, please mark it as "accept as a Solution.

• Sansa Clip not recognized by computer - new problem

  All of a sudden my Sansa Clip is not recognized by my computer. I use MSC forced for a year and have seen the page referred by others with this problem. Nothing seems to work. Download the new firmware will it correct even if the device is not recognized? How the new firmware can be installed on the device?

  At present the Clip plays already charged music, but I can add more.

  Suggestions? Thank you.

  JEMcQ wrote:
  OK - I'm a model. I used a charging cable not provided by Sansa. This is why the computer was not recognizing the Clip. However, is there a way to NOT use forced MSC to connect? I use it since I updated the firmware to the last spring and my thumb is painful.

  Your firmware has USB mode in the settings? If so, switch to MSC there... problem solved!

• Micro vault not recognized on computer running Vista

  My micro vault is not recognized my micro vault is not recognized on my computer how can I fix this problem. __

  Hey Guyver Micro,

  Ø summers - get you any error trying to connect the device.

  I recommend you to check if the device is detected in Device Manager.

  1. click onStart, type devmgmt.msc in the start search box and press on enter.

  2 see if the device is detected.

  You can run the Fixit which fixes some common problems related to the USB. Open the link below and click it on theFixit button.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB drives suddenly not recognized by Vista 64 SP2

  2 USB drives that work on another machine to Vista (32-bit) are not recognized and do not appear in my computer, but appear in 'remove hardware safely '. These USB drives has worked in my computer up to a week or 2 ago.
  When the disks are inserted a new item will appear in device ("storage volume") Manager who has a subelement ('generic volume') which has a yellow "!" which indicates a bad driver.
  The readers appear in disk management, but any attempt to change the drive letter or view properties gives an error "operation has not completed.
  Try to reinstall the drivers results in a message that the drivers are current, but the problem persists

  Hello

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Applications suddenly not recognized

  Hi guys

  Today, all of the sudden creative cloud is not recognizing my Adobe applications installed, instead it gives me the possibility to install them.

  Only Lightroom and Acrobat DC seem ok. (I have re-installed After Effects)

  Yesterday I was using Indesign, Illustrator and Photoshop, today they appear only in my apps I install list?  I can open applications that are actually installed, but Adobe CC is not to see them.

  I tried to stop and restart Adobe CC.

  I restarted my iMac.

  I've disconnected Adobe cc.

  Nothing has solved this problem.

  Any ideas please?

  See you soon

  Dave

  I contacted live support who helped me with this problem.

• Portege R700 Finger Print Reader suddenly not recognized OS

  Hello

  I've been looking for a solution

  My R700 on Win7 worked perfectly using the finger print scanner. At any given time without cause the
  hardware (fingerprint reader to log on) was not recognized by the operating system more.

  -J' tried to remove the software, reinstalled driver
  -updated it and so on resulting material was not found.
  -J' even deleted all the entries in the register - no go.

  -Finger Print genuine software starts, but only to give an error that the FP-reader is not present.

  Is there a way to remove the fingerprint stored manually by removing the manually.

  The equipment works according to the support. (The machine has been send)
  However I don't want to re-setup of the entire machine (it is a work laptop) just to make it work?

  Intro step by step to achieve this or advice?

  I couldn't find a description on how to manually remove fingerprints (cause I suspect this is the problem) from the software to do this does not start.

  Any input would be appreciated.

  Best regards
  Julian

  If you do not see material unresolved fingerprints or devices in Device Manager, then the device is either disabled in the BIOS or the fingerprint sensor is defective or too loose or there is a spill of liquid causing corrosion.

• D230 JVC DV camcorder suddenly not recognized by the computer

  I have a JVC D230 DV camcorder. I have had it for several years and have never had a problem connecting to my computer. Yesterday, I tried to connect the camera to my computer via USB. The computer does not recognize the camera. In a few moments, a message appeared on the screen that a new JVC driver had to be downloaded and installed, and that the camera wouldn't work if it was done. I downloaded and installed the driver. The computer still does not recognize the camera. I contacted JVC. The answer was the following: "JVC does not all drivers for Windows Vista." They suggested that my problem is caused by a Windows Update. I would like to know if something is known on this problem. It seems unlikely that I am the only person suddenly unable to download videos and images from a camera to a computer. The last time that I downloaded from my camera to my computer was in May. I have not had any trouble.

  Thank you.

  JVC advised me to connect the camera to the computer with a firewire cable that this connection uses no drivers.  Fortunately, it worked.  Thank you for the help and advice you gave me.

• the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

  At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

  Hi mstradt,

  1. which version of the operating system are you using 32-bit or 64-bit?

  2. What is the model of the camera number?

  3. you try to use the camera of Sony for the first time?

  4. How do you try to connect the camera?

  You can first try connect the camera with the different port and check if it is detected.

  Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

  You can also visit the following links and see if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why Windows Media Player suddenly not recognized my portable device even if the device is connected and is displayed in my computer?

  Until a week ago, Windows Media Player and my portable device of Sanza fuse got along beautifully when sudden WMP ceased to recognize the device.  This despite the fact that the Sanza is correctly connected and appears in the personal devices from my computer.  The Sanza even shows on its screen that is connected, but it's like OMP no longer sees it? Any thoughts? This who could I have inadvertently done to cause this painful ' divorce? Thanks for any help.

  Hi Cynthia,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. are you able to play other files using Windows Media Player?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• HP 355 G2: Camera and Microphone not recognized on laptop HP 355 G2 (JOY62EA #ABU)

  I bought this laptop on 13 August 2015, but I managed to fix my Samsung laptop & kept the HP in its unused box as a spare.

  I decided to upgrade to Windows 10 before July 29 but before I did I checked the laptop to make sure that everything worked and now I find that the webcam internal or the internal microphone works.

  In Device Manager it is not an audio inputs and outputs, nor is there an entry for Imaging devices & YouCam5 says also that there is no webcam connected.

  Video controllers & audio game it shows

  AMD High definition Audio Device

  CyberLink WebCam driver virtual

  Realteck Audio Definition High

  All three are displayed as smoothly and drivers are shown as being up-to-date.

  After trying many fixes, I came to the conclusion that it is a hardware failure, unless anyone knows differently.

  If I upgraded to Windows 10 & then send it to repair will be HP accept for repair because I can't turn round before July 29.

  P.S. The laptop is in his out-of-the-box factory status not being hit & no added software.

  Any suggestion will be welcome, thank you for reading my post.

  @Caravanj

  Create your recovery for existing installation media.

  If you can get the system to migrate to Windows 10, the "digital license" for Windows 10 will be registered for you by Microsoft.

  You can, if you wish, to migrate to Windows 10 and then use the "Back" feature to "undo" migration.  Your digital license is still in 'security' when you are migrating (yet) at a later date.  If you "turn" the computer will return to its original Operating Sytem - no worries for repair.

  You can install Windows 10 later with the following caveats:

  If the motherboard is replaced, it is likely to be a problem with activation - motherboard is part of Microsoft digital key management.  This does not mean that you can never go back to Windows 10; This means that you need to maybe talk to Microsoft and explain your situation.  At the very least, you may have to go through the "phone activation" - not painful, just painful and a lot of typing.

  If you are migrating, and then the 'return' feature hesitate (fail), use your recovery media (as you did) to retrieve the original installation.

  OR - Contact HP: explain the situation.

  HP Contact Information - sales, Technical Support, other Contacts - USA / Canada

  Contact HP support - USA-

  HP technical support / Service delivery - some English Speaking countries

  Including the United Kingdom and Europe

  From a post of @Sunshyn2005, contact HP technical support:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter product number OR select Auto Detect your computer
  Step 3. Scroll down, to find: "still need help?  Fill out the form to select your contact options.
  Step 4. Scroll to the bottom, the contact options click on HP > phone number click on Get

  File number and phone number appear on the screen.

  HP customer support - product warranty check

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Card not recognized on computer after upgrade to Vista

  I have windows XP, I've upgraded to windows vista now my computer does not recognize the photos on my memory card from my camera. It worked when I had xp. How can I get my computer to read the memory card?

  Photogenic salvation,

  See the article next/troubleshooting information about your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Western Digital external hard drive not recognized in Vista

  This computer is Windows Vista Home Premium (32-bit) with Service Pack 2.

  I have connected an external Western Digital (My Book).  Sometimes the HD appears in devices such as WD My Book IEEE 1394 SBP @. Device Manager, and sometimes it isn't. ????

  No matter, it NEVER so appears as a disc when I look in Windows Explorer. ???

  Help, please!

  Thank you.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldbring at least for an external hard drive and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.