BlackBerry Smartphones "BOLD" not blocking when sheathed

Similar Questions

• BlackBerry Smartphones "BOLD" not wanting to do what I tell him

  first... Yes this is my first post and im asking for help...    I want to thank everyone who cares to take their time to offer me, some random, a bit of advice

  I have a "BOLD"

  try to connect to a vista pc

  I was not able to get the "BOLD" for a synchronization with the Office Manager, but I was able to get the vista machine to recognize the device... and were able to move files from pc to "BOLD".

  but now I have a video recorded on my "BOLD" I want to put on my PC...   But now, I just realised that nothing ive photos or video taken with the show "BOLD" upward on the pc... I can see the things I put on the "BOLD" with the pc.

  I just deleted my Office Manager... and installed Blackberry USB and Modem ENG (DM4.6, B13) drivers

  I am looking for my office installation disk so I can try to reinstall the Manager... but all I really want is to be able to see my "BOLD" photos and videos on my pc

  Check the below motion picture. It shows how to explore the memory of the device.

  

• The names of blackBerry Smartphones Contact not displayed when calling

  Hello

  New in BB, moved my SIM Nokia in the 8900.

  I have problems with names not displaying not when they call the number is entered differently (depending on whether I'm foreign or in Thailand). Some numbers are saved under the international numbers (+ 66829...) to other entries like (0869...).

  The number is certainly in my BB as + 668612345678, but if they call when I'm in Thailand the number will appear as 0861234567. To get around it, I'll have to get into contact and add an additional number for each contact has + 668612345678 and 0861234567.

  Is anyway to work around this problem?

  It all depends on how you have your game of smart dial.

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• Schedule of blackBerry Smartphones does not open when you click on

  When I click on the calendar icon on the homepage it does not open, it crashes just the phone.  I am trying to delete all the entries in the calendar (in thousands of duplicates).  I have no idea what to do.  I did several battery grips and I went and checked the CPU usage (it's so slow) and found between the OS and the calendar they use, increased by 90%.

  Thanks in advance,

  Torch 9800

  AT & T

  BIS

  If you deskttop manager is installed on your computer, connect your phone and go to device > delete data > selected data > calendar (all) and delete... This should remove entries from your calendar completely and should fix this... If you restore a backup of your calendar, however, the problem will come back then you will need to put entries by hand sorry

• BlackBerry Smartphones "BOLD" updates fail when 'Connecting to Boot ROM.

  I tried to update the software of my phone rebooted Desktop Manager several times with the new version.  Everything is fine until it gets to "Reading Boot ROM" and he has a 'fatal error' - update process ends and nothing else happens.

  I'm new to BB but have tried researching the problem on several sites without finding any information.  Thanks in advance.

  Well, I solved just my own problem.  It seems that my Dell XPS 420 has 2 USB ports in the front, but none of them either A) have enough requires to be able to properly connect the "BOLD" or B) the "BOLD" USB 2.0 and before XPS 420 are 1.0.

  I have connected the bold faced back (motherboard integrated) and now I'm car along the city of update.  Thanks for the help.  xD

• Name of the Contact to blackBerry Smartphones does not appear when someone calls?

  I have a BB 8520 curve and whenever someone rings me it just displays their number and not their name so I never know who's calling. How to solve this problem?

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• BlackBerry Smartphones can not access Media card with BB Desktop or Media Sync 9700

  The other day I received a Reburbed Bold 9700 update.

  I use Ver 6 Deskstop OS and the 9700 is running device code latest version 5.

  I have a Kingston 4 GB media card that I know is in place because the 9700 recognizes it and when I go to files and select the media card, I can see all the files on the card and when I take a picture it is written on the card so I know that memory is very good and he sees the 9700.

  The problem I have is BB Deskstop or latest version of Media Sync to see so I can transfer files to and from my PC and the media card.

  The error message that I receive on the two applications, it's that I have to turn on mass storage Mode.  When I look at my memory settings:

  Compression - enabled

  Map of media Support - on

  Mass Storage Mode Support - on

  Auto enable mass storage Mode when connected - Yes

  I formatted the card successfully on the BB.

  I tried another card memory (2 GB) and also properly formatted as well.

  I also tried another USB cable into another USB port.

  I had a BB hard reset by pulling on the battery... several times.

  I had another before Blackberrys and have never had a problem of access to the media card.  I would have thought that it is easier on the 9700.

  I did search endlessly on the Web and saw other people with similar problems but many were so simple that the card is not seated properly and it also had the symptom that the BB is not recognizing the media card.  My BB recognize media cards and use them, but I can't access the card through my PC.  I understand that I may not see a pendrive pop up in Windows Explorer, but I can't understand why the BB Desktop or Media Sync cannot access.

  I know that both of these applications communicate to the BB cause I get requests for passwords and the desktop, I can view all my applications and I used to update the device until the last OS level during the troubleshooting process.

  I just wanted to see if anyone has experience this problem and has tips, if not I will contact AT & T or go into a local store to see if they can help.  I just think I'm missing something that I can take care off instead of my own.

  Thank you!

  Hello

  Have you tried to connect the device on another computer?  If another computer to recognize the device, it may just be a case of bad USB drivers on your computer.

  Here are some KB articles that may be able to help:

  KB19717 - BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer

  KB10312 - impossible to display the map of support using the BlackBerry smartphone

  You also need to remove the USB ports on your computer (using Device Manager), and then restart the computer to reload the correct drivers.

  An alternative to this is to simply use a microSD card reader which allows you to use the microSD as a flash drive.

  I hope that this info is another starting point for you!

• BlackBerry smartphones can not connect BlackBerry Pearl 9105 for PC

  Hello world

  I have the following problem:

  After using my BB Pearl 9105 for almost 3 years, I can not connect to PC more (I still menu with choice of 3 options on my smartphone when I connect, but when I click on that option "usb" or "charge", the menu appears again).

  In addition, the PC does not recognize my smartphone as a usb device. Updated BlackBerry Desktop Software and the purchase of the new Micro-USB cable did not help.

  I can still load.

  Could anyone suggest me how to solve this problem?

  Hello and welcome to the community!

  Here is a list of troubleshooting items... I hope that something will be useful:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone because of administrative permissions
  • KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when user account control is enabled
  • KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when a full version of Roxio® Media Manager is installed
  • KB28456 BlackBerry Desktop Software is unable to detect the smart phone BlackBerry when the USB selective suspend setting is enabled
  • KB28444 The BlackBerry smartphone is not detected by the BlackBerry Desktop Software, when connected by USB to a USB hub or a docking station
  • KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when connected via USB
  • KB02640 Troubleshooting USB connections
  • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  • KB00125 BlackBerry Desktop Software cannot detect the BlackBerry smartphone
  • KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  • KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  • KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  • KB01451 How to enable Sync advanced logging if a wired synchronization fails
  • KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
  • KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  Check also on the incompatible software... it was reported that NTI Shadow Ninja & software can cause a conflict; Remove and reinstall the desktop software BB allows to install correctly.

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. Also apologies if all are not currently available... RIM takes their monte and descends at will as they revise things.

  I hope that something it is useful!

  See you soon!

• BlackBerry smartphones can not get incoming messages in Facebook

  I'm unable to receive incoming messages in the facebook message box. The messages are giving, but I can't receive. Ask for help!

  Hi and welcome to the forums!

  KB27993 Facebook for BlackBerry smartphones is is more updated of the new RSS

  «On some occasions, that the Facebook® for application smartphones BlackBerry® is therefore more updated news FEEDS even when a manual refresh is complete.» Users of blackBerry smartphones who not know this problem may be able to view existing comments or other profiles of FaceBook® friends".

• BlackBerry smartphones are not able to put songs on my storm... Phone not connecting

  I installed the Desktop Manager and when I click on the section media says I need turn on mass storage. I have the memory of mass, but it is not always connect. What can I do to fix this because I really want to put more songs on my phone.

  My phone is not fully install on my computer because it says there is a problem with the drivers of Bluetooth devices, I don't know what it is for, but I guess that its important. Where can I find the drivers to install on my computer?

  Any help is appreciated.

  Hello brend82 and welcome to the community of BlackBerry Support Forums.

  Take a look at this article from the BlackBerry Technical Solution Center

  KB19717 - BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer

• BlackBerry Smartphones Blackberry 9650 Bold - not charging

  Hello

  There is a problem with my Blackberry 9650 "BOLD" (right now, she is evacuated to the point when the unit cannot be switched) load. After connection of the charger, diod red shine for a few seconds and then turns off. After that, normal charger photo with flash appears but it is stuck and not move not... (I can not specify my OS version and free size / applications installed on my device is now disabled...)

  What I tried:

  -Leave the charger of the day after, I did several times and nothing happened. Tried the wall charger and USB charge, none worked.

  -Purchase new charger, old charger was a sort of Motorola or regardless of the brand, it worked, but I recently bought original Blackberry charger, but it has not solved this problem.

  -Buy the new battery. right now I use an unofficial battery, it has solved this problem (I had before with also original battery). Buy new solves the problem for a few days, but then I accidentally emptied my battery at 0%, resulting in the same problem as before.

  -Leave the battery on the unit fo 24 hours and then put it back inside

  -Various boards 'disconnect the battery with the charger connected and then put again".

  Right now, I've tried almost every Council or tip Uncle Google spits when I ask for help, if I appreciate any help that can solve this problem...

  Thanks for your help.

  Hello and welcome to the community!

  Unlike older battery technologies, they do not run out. This has been known to damage, including making them useless. Since you solved your problems with a new battery, but exhausted while the problems returned, I would assume that your new battery was also damaged, and yet another replacement is your next step (and not allowing it to exhaust).

  Good luck!

• BlackBerry smartphones can not download blackberry appworld on my bold 9780

  connected peripheral to my wife to downlod app world and all wifi he said the module does not support download fails... and when I try to download it through my office option, the following message appears: download via a USB connection is not enabled for this product. Please visit our mobile download site using the browser of your BlackBerry® smartphone.

  pls help

  Hello

  Using your BlackBerry browser test down load App World 3.1 from the mobile site.

  http://mobile.BlackBerry.com

  Let us know how it goes!

  Thank you

  Bifocals

• BlackBerry smartphones can not turn on my "BOLD"

  Had my Blackberry "BOLD" for a few months now and keep recently to 'lose' my ISP.  Can access the net ok.  Remove the battery and put back set the claimant instantly, until today.  At out the battery and put it back in and now I can't turn on my "BOLD".  There nothing... no lights, not even when plugged into the charger.  It is quite dead.  Any suggestions on what to do now?   Thank you

  Finally I talked to my ISP.  They took me by diagnostic checks and asked me to try different ways to load but still no lights.  They decided that the handset is dead and launch me a new.  Thought I would update you pack the same thing happen to you.  Kudos to thouse that resembled my question.

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?