The attention! "Could not initialize the component of the application security...". »
I started receiving this alert after restart last Saturday (22/02/2014) and freezes before Thunderbird it is fully operational: (incorrect application behavior?)
Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.
I have over 500 GB free on the hard drive and have checked the TTBOMA directory. As recently as this
morning I still once uninstalled using TB TB uninstall utility, rebooted and reinstalled from the Mozilla Web site. Nada,.
Toshiba Satellite L875D
Windows 8
Troubleshooting Info:
Thunderbird
Version 24.3.0
User Agent Mozilla/5.0 (Windows NT 6.2; WOW64; RV:24.0) Gecko/20100101 Thunderbird/24.3.0
Any help out there?
Delete the file cert8.db in Thunderbird profiles folder.
This will remove all the intermediate certificates Thunderbird has stored.
Tags: Thunderbird
Similar Questions
-
Start Thunderbird pop - up said "could not initialize the security component.
Hello
Thunderbird started the following window pops up suddenly. No problem during the morning session.
Draw the attention of
"Could not initialize the component of application security.
The most likely cause is problems with the profile of your application directory.
Please check that this directory has no read/writerestrictions. ETC.»
I checked in the T / B profile folder.
'Certificate Mgr' window is empty (no ads).
So is the window "Mgr Device.
I couldn't find the mentioned restriction "read/write".http://KB.mozillazine.org/Could_not_initialize_the_browser_security_component
-
get the message "could not initialize the browser security component" offers solutions does not
I get a message "could not initialize the browser security component" more a screen empty. 5 solutions offered in aid, only to create a new profile help, but this helps only for this session! So, I'll have to create a new profile each time I start Firefox. This means not favourites, without Add-ons (they require a reboot), etc. I even tried to delete the profile by default, but it does not help. The new profile is deleted whenever I start. What should I do?
I've done this several times. The new profile would work for a single session. Each time, Firefox (or something) would remove the new profile, so he did not; I'm done with the default profile, which was obviously altered. Here's what finally worked. Of after your 1st answer, I saw that the other profiles exist as subfolders in the profiles folder, even if they were not listed when I did firefox.exe - p. So, I got the idea to uninstall Firefox and see if these files were still there. And they were! In fact, records of Mozilla, Firefox and profiles had not deleted with uninstall. I deleted the files, re-installed and now I'm fine and write for Firefox. So, if someone continues to have problems with a corrupted profile, suggest to uninstall and then deleting all records related to Firefox that are left behind.
-
Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
behavior when you access security features.See:
-
I can't add a component from the Add Remove program window as says could not initialize winxp
I can't add a component from the Add Remove program window as says could not initialize winxp
My victory is xp professional ver 2002 service pack 3
It's usually easy to fix, but if you removed all the dll and inf files, you can have a bunch of other problems that you have not yet discovered.
If you mean when you try to use Add/Remove Windows components you see a message like this:
Install was not able to load the master file.
The application could not be initialized.This happens because this file is missing:
c:\windows\inf\sysoc.inf
There is no copy backup of this file on your system and run the System File Checker will not replace the missing file (sorry, that Microsoft committed Support Engineer 'experts').
You will need to get a real copy of your XP bootable installation CD or from a reliable source.
There's a copy on my SkyDrive, you can download - here's how:
I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):
c:\Windows\Inf
Here is the link to my SkyDrive and you can get the file you need here:
https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311
When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file named sysoc when the name of the file should really be called sysoc.inf (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
You must then copy and paste the downloaded folder appropriate on your system.
-
I can't get my Age of Empires 2: Age of Kings drive on my computer.
It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.
What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.
Help, please!
What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.
-
Hi, I recently installed rise of nations pc game but does not work because it says "could not initialize services make sure that your video card and drivers are compatible with the game. What should I do, how can I fix this to get the game to work.
Hello
1. What is the operating system installed on your computer?
2. What is the brand and model of your computer?I suggest you to follow the links and check if it helps. -
I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows? Y at - it an easy fix?
Have you tried to manually install the hotfix by clicking on it, and as an administrator?
-
I've heard fans speed medium speed and high when I don't do anything that would require heavy resources. I tried the two Ctrl-alt-delete and right-click in the taskbar, and it fails to start. "The application could not initialize properly (0xc0000006). Click OK to close the application. "I click OK and it pops up again and then I click OK again and it goes.
I ran AVG and Spybot in safe mode with network but nothing detected... and you erased my memory of page file also.It is simply damaged or make me a bug/virus.HP D220 desktop modelOk. What I wanted to say, this is so that YOU can see the file, you must be able to view hidden and system files. Windows will however see the file any if YOU can see it or not.
In autoruns, in my opinion, you have not clicked on 'options', then 'Filter Options '.
Make sure that all check boxes are cleared in 'Filter Options '.Tomorrow, I would like for you to delete infected tasks Manager by HP. And copy the Dell2 for HP-infected Task Manager. Just in case the task manager has been infected and start actually malware.
So, tomorrow,
-Alex
-
Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond. I'm not as technical as most of you, but I am unable to even get the software to install. I get an application error installation "the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP. Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...
Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26
-
Hi I was wondering if someone out there could help,
My laptop is a packard bell Windows xp, when I turn on the laptop it does not completely load, it will take me to a black screen with the error message error lsasss.exe - request "the application could not initialize properly (0xc0000006). Click OK to close the application. But when I click ok nothing happens except disappears from the message bar and im left with a black screen. can someone tell me what to do?
Hi beavarney,
· Do you remember any changes made on your computer before the show?
Security Authority Subsystem Service LSASS (local), is a process in Microsoft Windows operating systems that is responsible for enforcing the security policy on the system.
Method 1:
I suggest to start the computer in safe mode, you can check the link for the steps below: a description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222
Method 2:
If you are unable to start the computer in safe mode then try last known good configuration. Link: How to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I try to install Yahoo Mesenger and it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?
Hello DennisUSMC,
Look at the thread in Yahoo Answers.
http://UK.answers.Yahoo.com/question/index?QID=20091129190055AA1nEspHe suggested to uninstall other versions of Yahoo messenger before installing the latest version. If it does not help to solve your problem, then go to Yahoo support.
http://help.Yahoo.com/kb/index?locale=en_US&page=product&y=PROD_MSNG&PIR=qWKr06VibUkWf.Qpynpw1MiIKLy_mnW1Xh_iz.es9b2DJRQQvLHTQmISincerely,
Marilyn
-
The said software "could not initialize the databases" and does not sync my BB. This has happened for a week. I reinstalled the Desktop software, reset to factory settings, restore a backup file, did a hard reboot by removing the battery, tried to synchronize an element (calendar, contacts, tasks, notes), at one time, updated BBM all to nothing does not... Help.
Looking at the synchronization log, he said this...
14:49:29.765 CRSyncUtil::BackupCacheDBs: error copy of the file 'C:\Documents and admin Local Settings Application Data is in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Data\4_65538_PR.tdc' to 'C:\Documents and admin Local Settings Application Data is in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Data\4_65538_PR.tdc.sav': 0 x 00000070 (there is not enough space on the disk.)
I looked at this file and at the time I started to get into trouble. It was enormous... I have moved out of the directory and tried to re-sync. It worked!
-
Original title: Virtusa Tennis 4
Virtua Tennis 4 error message has
"Fatal Error!"
Could not initialize the Games for Windows Live. This application will be closed.Hi Ravikumar,
Of Virtua Tennis are what version you try to work with?
It seems that Virutal Tennis version is not compatible with Windows 8.1, you can check the Windows Compatibility Center.
See also:
Make the programs more compatible with this version of Windowshttp://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
However, uninstall the "games for Windows - LIVE redistributable Microsoft" and 'Microsoft Games for Windows Marketplace' and resettlement of http://www.xbox.com/en-US/Live/PC/DownloadClient allowed little such users mentioned by ' GeraldLuger answered December 30" provided article.»
Virtua Tennis 4 - games for Windows LIVE
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/Virtua-Tennis-4-games-for-Windows-Live/81e86e55-6d8c-4703-B09E-190306110238Hope this information helps. Response with status so that we can help you.
-
When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.
Hello
Please see failed to initialize the installation program
"Installer initialization failed." I have tried everything what it but no dice.
I hope this helps!
Maybe you are looking for
-
Sound does not work on Satellite A300
I have a Toshiba Satellite A300 Windows Vista. The noise stopped working. I reinstalled the operating system and reinstalled the audio device on the site of Toshiba download drivers but I still get the error. "No Audio device detected". Under the win
-
Voltage corresponds not counter in the terminals on SCB68 with PCI-6254
Setup: I have a PCI-6254 measuring 10 channels, differential all connect. 0-4 and 16-19, with SCB-68 2s and armoured and other cables. Entered 0-4 have pressure sensors that turn off 0-10 V air-conditioned and equipped with the same commune. The se
-
Max and Min value for each column
Hello! Can someone help me to change my. VI? I want to get the Min and Max value for each column in the table in the appendices. Then I need to create two tables 1 d - the first with the min and the second with the max value.
-
Windows Firewall does not, what to do
I install windows xp pro - and the firewall does not open. What can I do?
-
FIX for the problems of HP4500 ink cartridge!
I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind