BlackBerry Smartphones DTEK 50 vs BB10 hub

Similar Questions

• BlackBerry Smartphones DTEK 60 aptx

  Hello support BlackBerry

  Can you please tell us if the DTEK60 supports the aptX codec in the bluetooth stack?  It is not in the official specification.  It's the only thing that holds back me a purchase.

  Thank you

  Sorry @llivingstone

  Apt - x is not available on the series DTEK or PRIVATE.

  If this changes I will not fail to communicate because I'm eager to see APt - X to support me

• BlackBerry Smartphones DTEK and device encryption must be OPTIONAL

  As far as I understand BlackBerrys intended to ensure the safety of the box, I think that DTEK and device encryption affects performance and therefore has a negative impact on customers and the user experience and lead to lower sales and higher return rates.

  BlackBerry needs to update the firmware and optional encryption of devices and security DTEK.

  Thanks for your post @Rotkaeqpchen!

  PRIV centred on the security arrangements that we can't allow a user to remove DTEK or disable encryption.

  That being said I capture your request and will share in your name with our train produced for later review. That being the case I'll mark my answer as the solution. To anyone else reading this post which is in agreement with this idea please like @Rotkaeqpchen and my post so I can understand the interest. Thank you!

• BlackBerry Smartphones DTEK led Notifications

  y at - it a soft for led color Notifications for the DTEK.

  Belladog wrote:

  y at - it a soft for led color Notifications for the DTEK.

  The DTEK has only a white LED - color change is not possible

• 3/10/11: Vista update story reported that an update to the Blackberry smartphone failed to install. How can I get this update or at least know why it has not installed?

  Here are the associated error message.

  Research in Motion - other hardware - BlackBerry Smartphone

  Installation date: 10/04/2011 03:00

  Installation status: failed

  Error details: Code 800F020B

  Update type: recommended

  Research in Motion, another update of the software of hardware released in April 2008

  More information:

  http://winqual.Microsoft.com/support/?DriverID=20165724

  Help and Support:

  http://support.Microsoft.com/select/?target=hub

  Hello

  If Windows Update error 800f020b while trying to install updates, an update that you are trying to install applies to a device that is not connected to the computer. Make sure all your devices are connected and turned on, and then try to install updates again.

  Refer to this article for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Using software update to blackBerry Smartphones.

  I had planned an update last night to demand for 2300 hour British. When I woke up, I found my phone was off and the charger was out of my phone. When you turn on again my phone, he immediately started backup software, which was going well until he started the social RSS update. Due to the fact he did not pay all night, it was not connected to a sense of network, it appears 'Social Feeds 0% '. Unfortunately, I can't leave this screen and so it tried to save social stream without connection for the last 6 hours.

  Thank you

  Tom

  Hello and welcome to the community!

  First - reduce the size of the font in your messages... the effect is the same as if you had used ALL capital LETTERS, for which this article could be useful:

  • http://kathrynvercillo.HubPages.com/hub/what-people-think-when-you-type-in-all-caps

  Now to your problem...

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Browser blackBerry Smartphones bing says no network connection. Help, please!

  I just updated my 8530, and now when I open my browser bing, he said: no network connection, but I have all networks enabled and I'm typing this from my blackberry on verizon service, what can I do to fix my phone, can I recharge the old software? Please help me!

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) return Service books (pre-BB10 only devices)

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  Good luck!

• BlackBerry smartphones can not connect BlackBerry Pearl 9105 for PC

  Hello world

  I have the following problem:

  After using my BB Pearl 9105 for almost 3 years, I can not connect to PC more (I still menu with choice of 3 options on my smartphone when I connect, but when I click on that option "usb" or "charge", the menu appears again).

  In addition, the PC does not recognize my smartphone as a usb device. Updated BlackBerry Desktop Software and the purchase of the new Micro-USB cable did not help.

  I can still load.

  Could anyone suggest me how to solve this problem?

  Hello and welcome to the community!

  Here is a list of troubleshooting items... I hope that something will be useful:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone because of administrative permissions
  • KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when user account control is enabled
  • KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when a full version of Roxio® Media Manager is installed
  • KB28456 BlackBerry Desktop Software is unable to detect the smart phone BlackBerry when the USB selective suspend setting is enabled
  • KB28444 The BlackBerry smartphone is not detected by the BlackBerry Desktop Software, when connected by USB to a USB hub or a docking station
  • KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when connected via USB
  • KB02640 Troubleshooting USB connections
  • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  • KB00125 BlackBerry Desktop Software cannot detect the BlackBerry smartphone
  • KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  • KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  • KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  • KB01451 How to enable Sync advanced logging if a wired synchronization fails
  • KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
  • KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  Check also on the incompatible software... it was reported that NTI Shadow Ninja & software can cause a conflict; Remove and reinstall the desktop software BB allows to install correctly.

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. Also apologies if all are not currently available... RIM takes their monte and descends at will as they revise things.

  I hope that something it is useful!

  See you soon!

• BlackBerry smartphones can not open emails

  Hi - I can not open my emails this morning. Can see header, but when I try to open nothing happens. All the patches?

  Hello and welcome to the community!

  If it's for BES, then stop now and seek assistance from your BES admins.

  But if it's for BIS-based email, so with a strong carrier network signal (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books (pre-BB10 only devices)

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should try remove and re-add your configurations for the relevant accounts. Otherwise, you should contact your mobile provider for formal support.

  Good luck!

• BlackBerry Smartphones, sending emails

  Whay can't send emails but I got it from a personal account? I have a BB ID. email come to my area main message and not in the e-mail folder, I put in place.

  Bob

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books (pre-BB10 only devices)

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. IF this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should try remove and re-add your configurations for the relevant accounts. Otherwise, you should contact your mobile provider for formal support.

  Good luck!

• BlackBerry smartphones Add Contact Pro app - download problem

  Hi all

  I have the BB 8520 curve. Last week I bought 'Add Contact Pro' on Blackberry app World. After purchase and during the download I received an error and stopped the whole process. The app didn't download. I sent mail to the developer app three times but no response.

  Can someone help me on how to download again (I did purchase)?

  Thank you

  Atomleaf

  Hello and welcome to the community!

  I suggest that you clear the cache of the AppWorld application.

  For legacy devices (pre-BB10):

  1. open the App World

  2. go to my world

  3. follow one (and only one!) of these steps:

  3. for the BB keyboard-oriented - hold down the ALT key and press on, in the sequence R, then S, then T

  3B. for touch screen only BBs - hold the num-lock (! 123 button) so that it hangs and then press on, in the sequence 3, then 4, then)

  3 c for the most recent (e, g., OS6 and 7) BB s, see this KB:

  • KB24714 How to clear the cache of BlackBerry App World

  4 AppWorld must close.

  5. If your BB locks after issuing clear cache, do a battery pull reboot

  6. return to AppWorld/MyWorld (it can be slow, while it re - sync). .

  If (4) stage arrives not as described, then the empty the cache failed.

  For BB10 devices:

  • KB33818 Applications in BlackBerry World are stuck in a State facility and cannot be cancelled or removed from the download list

  After the empty Cache, then to re - install the app, please see this KB:

  • KB17625 How to install or transfer has already purchased apps from BlackBerry App World for BlackBerry smartphone

  Good luck and let us know!

• BlackBerry® Smartphones email does not not on 9700

  Hello

  Hoping someone can help me here.

  I'm trying to fix Bold 9700 from my mother-in-law.  I know that I had this same problem with my 9700 old a few years ago, but don't remember how I fixed it.

  Its BB was working fine, then emails came only sporadically.  She called Rogers, technical support and they told him to do a full restore.  After the full restoration, she has absolutely no email and when you click on the e-mail configuration in the installation section it goes absolutely nowhere... almost as if it has never been activated.

  I tried

  -a reload of the operating system available (same problem)

  -a return of service books (an email comes through recorded everything, but then nothing else comes through)

  All the other features of the phone seem to work perfectly.  The person of Rogers told him that the problem was because the phone is old and it's broken and won't work anymore.  I do not subscribe to this belief and am sure that we can get it up and going again for her.

  So can offer help here on how to fix this?

  Thanks in advance

  BaseballLady (currently sporting a 9790 and anxiously the BB10!)

  Hello and welcome to the community!

  You have tried a lot of things... Here's a little more perhaps.

  You may want to consider using BBSAK (bbsak.org) to perform the wipe there is able to... sometimes a clean WIPE of this kind, followed by the reload of the operating system, can help.

  You can also try this procedure might limit the specific causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  In addition, after each attempt reloading, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Good luck and let us know!

• BlackBerry Smartphones does not start, quick flashing bright red Please HELP.

  Good then today I swapped from a 7130e to a 8330 (verizon)

  I managed to remove the old political security using Jl_Cmder (which worked fine) and I got rid of the firewall so issue.

  Phone was working fine until I tried to use the device switch Wizard, the operating system of lobbying to halfway through the process of upgrading the 8330 upgrade failed. I tried to upgrade to the latest release 8330AMEA_PBr4_1.5.0_rel101_PL3.2.0.51_A4.5.0.77.exe verizon.

  Now, my device appears to be watered.  It is the twice red light flash every 2 seconds.

  When I connect the device to my PC device manager sees the smartphone connect on the USB hub, but Device Manager never seem to find the device.

  I did a hard reset-no change.

  tried to reset the values by default using JL_cmder - no change, but got the following error.

  ---------------------------------------------------------

  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2007 Research In Motion Limited
  Connection to the device... debug: COM in the course error
  Open: (0 x 80040001)
  Error: could not open port

  Order is complete!

  To complete the factory reset, remove
  the battery to dream a computer Pocket wipe.

  If you have already saved your
  data, do it now or it will be deleted.

  Press a key to continue...

  ---------------------------------------------------------

  tried to do a JL_cmder wipe - no change.

  tried to connect with no battery and. -No change

  Tried to delete the blackberry smartphone in Device Manager. -No change

  My 3 other mature all connect correctly to the mobile and devices Erzberg and Office Manager.

  PS Yes I remembeed to remove the vender.xml file when you do most of this stuff.

  versions of the software

  Desktop Manager = 4.7.0.32

  Device Manager = 4.3.1.15

  OS before 4.2 issue I think

  Visit this link:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• Update blackBerry Smartphones / Device Manager issue

  Hey guys, I have a problem.

  I recently acquired a Blackberry 8330 and let me start by saying this: it's one of the best machines I've ever held. It is simply amazing.

  I installed the Device Manager and have been using it without any problem. Then, I went and did an update wireless with my phone, the upgrade of the OS. Since I did this, however, the Manager has recently stopped recognizing my device - my computer recognizes him again, as he charges when it is plugged in and I can always access to the hard drive, but for some reason, I cannot use the Device Manager to do anything - down, States in the Device Manager there is no trendy Black Berry as shown by the 'None' exposed next to the Pin number.

  What can I do? I really need to access blackberry via the Device Manager. Someone, please help > _

  Things I've tried:

  -Restart the Blackberry (both by pressing the red button and pull the battery and re insert)

  -Update the device to the more recent version Manager

  -The latest version is uninstalled, then download and install the version provided with the blackberry (4.2)

  I noticed that the CD that came with the device itself does not contain the most recent edition of the Device Manager, if that means anything. It's just weird that the Device Manager has stopped working after I upgraded. Currently, my OS is V4.5.0.175. I've recently updated both my 8310 Black Berry - same question parents. Before, I could access it via Device Manager. Now, I can't. Please help me!

  -Santos

  Ahhhh Yes... interesting... try these:

  Here is the list of troubleshooting atricles... I hope that something will be useful:

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  KB02640 Troubleshooting USB connections
  KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  KB01451 How to enable Sync advanced logging if a wired synchronization fails

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these.

  I hope that something it is useful!

  See you soon!

• BlackBerry Smartphones to Blackberry Manager devices to display the USB PINS

  My Blackberry Bold 9000 is not recognized by my office blackberry Device Manager.  After hours of playing around to try to solve this problem, here is what information I can provide.

  My desktop and laptop running Vista 64-bit.  I had no problem installing the Desktop Manager on my laptop and cable, updated processes, etc. all work fine.  In my view, this allows me to isolate the desktop and not the device or the cable. The Desktop Manager software is to date on both systems.

  When I try to get the Blackberry device manager to recognize my camera on my desk, in the table options of connection under connection, that COM1 is displayed, Disable stateful shown.  USB-Blackberry 9000 (Paperback) appears on the laptop.  I've hunted around these tips and google for a solution to this problem, but I have not yet found one.  Under the Windows Device Manager, "Blackberry Smartphone" is listed under USB controllers when the unit is plugged, and the drivers are updated according to the instructions on these cards.

  The functions of USB ports for the operation of the keyboard, mouse, and external storage.  I tried to connect to all six USB ports in the back and two on the front of my office, without result.  When the device is connected to my desktop computer, Windows recognises the Smartphone and SD card separately as mass storage devices - with the phone powered on or off mass storage device option.

  I have a feeling that this would be resolved if I could get the Blackberry device manager to display a USB instead of COM1 port.  Someone at - it solutions?

  Hey this is my solution... it worked perfectly for me, and oddly enough, this is a difficulty for VMWare (also the difficulty to detect USB devices)

  Try to right click on one of the USB hubs (in Device Manager) and looking at the details of the driver. If usbfilter.sys is in the list then open your registry editor and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter.

  I restarted after making this change, and it works fine now.  Its the first time in the month that I could plug my Curve 8900 using my USB on my PC 64-bit of Windows Vista (now Windows 7).

  KUDO to the population of VMWare for this solution.  Thank God, she also fixed for my BB Desktop Manager! WOOT WOOT!

  Here is a link where I found this solution

  http://BX.BusinessWeek.com/consumer-arbitration/view?URL=http%3A%2f%2Fcommunities.VMware.com%2Fmessa...

  Merry Christmas everyone