BlackBerry smartphones HELP! OS update stuck on step 11 of 12

Similar Questions

• BlackBerry smartphones HELP! My 9860 is frozen trying to update software

  Hey, I downloaded the software and tried to install it but its been stuck on 6% to backup your data (social RSS) and I can't reboot my device as it keeps going back to the loading screen. I tried to join my bb desktop but it goes just gray and unresponsive when I plug my phone into the laptop, pulled the battery and everything, really stuck to the someone can help? see you soon

  Try to start the machine in safe mode and see if you can cancel the update process.

  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877

  The only other way I know is do what you did, to connect to the computer... and during the connection, insert the battery and see if it recognizes the device.

• BlackBerry smartphone App error 602 stuck in a loop

  My Curve 9360 has been freezing a lot recently so I decided to check the software updates - there were many - but now I'm stuck.

  I finished the backup and installation process, but the phone restarts. Whenever he tries, I get "App Error 602". I tried the sofy and the hard reset, but I'm stuck in the cycle and my phone does not illuminate!

  Help please!

  You can try Safe Mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, if it runs stable, you might be able to perform other activities.

  Otherwise, you should also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry smartphones can not update bb id

  Hello

  I have a situation, I can't update my bb on my phone id (8520) I bought this phone to another user and its information is always that that checks the phone. I get an error message: enter the username associated with this smartphone. I think that's also why I can't receive and accept the invitations when friends add my PIN for BBM. I have not yet set up my email accounts, when I get to the email Setup page I get this error message: your e-mail account is already enabled for use of the company, but I'm not not using any email the company and I did the putting up of my email on my old bb 9000 before. pls help me on this, I know not what to do. I already have my BIS active but im getting this kind of errors... you can email me for any possible assistance, here is my email address:

  Thank you and hope to receive a feedback with you!

  EDIT: For your security, personal information such as email are prohibited. Please see the guidelines of the user   under article ""be sure to." "

  Hello and welcome to the community!

  Time to take a step back:

  • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  The seller must complete their first steps before you try to use anything.

  Good luck!

• BlackBerry Smartphones appworld not updated

  I tried to get appworld but received a message "to continue to use the bb world app I need to first upgrade my current version". After access to the Web site of bb to upgrade, I have chosen update today, then download now, and then click Next after selecting my language. Finally, the download option has come that I chose. message then told me he already excist and asked me if I want to replace it with the new version, I chose to replace. the new message came stating failed download. then I checked the details where it says 907 invalid COD.

  What can I do to fix it now?

  Help, please!

  Hello and welcome to the community!

  Please try this sequence:

  (1) to remove from your BB AppWorld

  • KB10040 How to view or delete applications on a BlackBerry smartphone
  • He asks to restart the BB,

  (2) a Batt Pull reboot (power on, remove the battery, wait, insert the battery, wait), even if redundant to the one you did in step 1.

  3) install a new copy of AppWorld (on your BB)

  • http://BlackBerry.com/appworld/download
  • Yet once, if he asks to restart, do.

  (4) restart another Batt-sweater

  (5) see if it works now.

  See you soon!

• My new Bb 8330 Says JUM error 513 blackBerry smartphones help me

  Help, please... This is my first bb and im new on this, I don't know what is happening, I tried to download something for my bb 8330 for the Desktop Manager and it asks me the password and I entered the wrong password and now my screen went all white and it says JUM ERROR 513 and under him It says RESET. Only option I have is to click just the reset but then it just keeps going back to the same screen. Help, please! What is going, and what can I do to get my phone back to how it was? Thanks in advance

  forget to mention!

  Check the steps below for OS - upgrade

  Step #1

  Before you begin, make sure that BlackBerry Desktop Software is installed on the computer.

  Step #2

  Make sure that you have installed the software for device updated on your computer. Visit this link to get the software for device update the carrier OS download site.

  Step #3
  

  Users can perform a full or selective data backup by using the tool of backup and restore in BlackBerry Desktop Manager using the following steps:

  1. Connect the BlackBerry device to the computer that is running BlackBerry Desktop Manager.
  2. Open BlackBerry Desktop Manager.
  3. Double-click on the backup and restore.
  4. Select backup to perform a full backup or select Advanced to make a backup of specific databases.
  5. Choose a location to save the backup file, and then click Save.

  Step #4

  To perform a clean installation of the BlackBerry Device Software, do the following:

  1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
  2. Double-click The Application Loader icon.
  3. Click Next to start the installation process.
  4. Type your BlackBerry smartphone password, if prompted, and then click OK.
  5. Click on the checkboxes corresponding to the names of the applications you want to load, and then click Next.
  6. Click Advancedand then click the check box next to delete all already installed applications.
  7. Click on Next.
  8. Click the check box next to do not automatically back up the application during the process of loading data.
  9. Clear the check box next to the backup and restore applications installed wireless.
  10. Click Next > Finish.
  11. Once the process is complete, the load succeeded message. Click close to return to BlackBerry Desktop Manager.

• BlackBerry smartphones help me

  can someone help me my blackberry strom isn't the top flashes a fire and then the red light comes on and it keeps doint this

  I recommend that you try to update the software on the phone.

  http://us.BlackBerry.com/support/installpc.jsp

  If you get stuck, then force detect the BlackBerry smartphone using the Application Loader
  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10144

• BlackBerry smartphones can not update AppWorld 907 invalid COD

  Hi guys. I bought my Torch 9800 (v6.0.0.570) in 2011 and so far the problem is still not resolved. Everytime I open the AppWorld

  -A message appears: "To continue to use Blackberry App World, you must upgrade your current version."

  - Then I download the update.

  Whenever the 99% achieved download bar, suddenly a message appears "907 invalid COD".

  I can't even delete my BB AppWorld. There is no option "Delete" in "Application Management" or "Modules".

  Hi Firdaus92

  In this case, it is advisable to upgrade the version of your operating system to the v6.0.0.756

  Search and download your OS and everything above applies

  By sdgardne 

   

  However, here's what I propose...

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry smartphones help on my 9650

  Pls help my phone hangs and sometimes its White wallpaper with error info nd will restart my device... I'm tired pls help

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry smartphone App world updated the blackberry torch 9800

  When I clicked on app world he said that she needed an update. Whenever I click on update, it will get at the end of the app world update then it will say "update failed". I can't use app world anymore because I can't update and it won't let me not use app world unless I update. Please help me.

  Hello Stephaniexo

  Welcome to the Forums of the BlackBerry Support

  If you encounter the problem of BlackBerry App World update, then please try this:

  On your home screen the unit go to Options > device > application > locate and remove BlackBerry App world in this list.

  KB10040 : How to view or delete the application installed on a blackberry smartphone

   

  Once deleted perform a battery pull reboot by removing the battery whiel your device is turned on, wait a min. and then reinsert this return. Finally, after the reboot, use your BlackBerry browser and navigate to www.blackberry.com/appworld/download and download the latest version available for your device.

• BlackBerry Smartphones help please error 552 more being not recognized by computer on 8520

  Hello

  I was wondering if someone could help I have tried everything to fix the error 552 on my curve 8520 but nothing works, and now the phone will not connect to my laptop, I tried apploader now it says device current is updated, office says unable to connect to the device (from the outset) software and the phone does nothing except sitting on a white screen with "software reloading 552" written on it.

  Could someone please help?

  Hi Davidemmy2

  Welcome to the Forums of the BlackBerry Support

  As your device does not detect that you can try the Application loader to force detection of your device to load the operating system, please see the Knowledge Base Article:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

   

  But remember, in this process, you will lose all data in your device, I hope you have your backup.

  Further information: KB18751 : error "Reload Software: 552" appears on the smart phone BlackBerry.

• Oh the blackBerry Smartphone help me, I had a lot of problems with my brand new BB bold 9870

  Hi all

  I thought about putting in place BB is so simple, just as it should. I read step by step how to install etc email account, but to set up my e-mail account does not work, my BBM will not work, I can not send or invite message to the other members of BBM surveys, I can't open my social network. If my email set up doesn't work not does not matter but please help me at least my BBM work, can someone send me BBM message, just to try. He thought Blackberry smartphone, that's really smart?

  Hello

  I answer you yet once here. Due to a problem with BIS, you should deal with this problem. Call your network for more information on this.

• BlackBerry smartphones help on bluetooth

  Hi I'm new to the Forum of support I am owner of a 9300 and all works well, it is just that I have canoe receive all type of files via bluetooth to other devices, but I'm able to send files with other devices. my encryption is disabled also wen connect another device I disable encryption iin the properties of the device too. but still I am not able to receive files. instead some a / v remote service begins... but no receipt of file... CUD smbady help me

  Hi and welcome to the Forums!

  See this KB:

  • KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones

  Replace the instructions appropriate for your other device instead of the transmitter unit KB section in the KB. Unless you're on BB OS 6, do not jump 'BT help to receive' step on the BB receiver... nothing will transfer if you do.

  Good luck and let us know!

• BlackBerry smartphones HELP! -Application error 606

  I'm relatively new to the whole community of smartphone, and I fear I actually broke my Blackberry!

  I noticed that e softwareupdated was available for my Blackberry, so I chose to download it. The problem is my phone kept freezing in the process, and I was getting a little impatient. Finally, my phone told me that there was not enough memory, so I should delete some applications to make room. So I selected a few to remove, and my phone froze AGAIN. Now, if at all, it has frozen or not, I'm not sure... Maybe I'm too impatient for the life of a smartphone.

  In any case, I decided to take out the battery to reset the phone, I have grown really tired and has to work in the morning, I so wanted to just turn my phone and turn it on again, put my wake up and go to sleep. As I just re - turn the phone on, it starts to load up as it usually does, then a screen appears:

  "Blackberry 5.0.0.496 platform.

  Then it lists a whole bunch of items in the phone, in alphabetical order, the first being "Addressbook."

  Then, in seconds, the screen goes all white and a small message will appear "Error App 606" and it gives me the only option of resetting my phone. I click on reset, and it's a cycle... The phone seems to be loading as it normally would, and then he'll come back to this screen of the Blackberry platform, then the App error 606.

  I ring my network provider in the morning to see if they can help me, but I was wondering if anyone of you here would know about this at all? I feel so stupid for the cause!

  Hi xxjadey_babyxx

  If your device is not detected so you had to force the detection of your device by using the Application Loader. But remember in this process you will lose all data on your device, I hope you have your backup device, follow this Knowledge Base to recover your device:

  KB10144 :How to force detect the BlackBerry smartphone using the Application Loader.

   

  Please try it and let us know of your progress.

   

   

  Prince

  ______________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• BlackBerry smartphones HELP! Bold 9780 - nothing worked

  Hello

  Really hope someone can help with this problem.

  I recently upgraded my 8330 to a Bold 9780 (v6.0.0.285 platform 6.5.0.54) on the Bell Canada network - when I woke up this morning and turned on my phone, it took a good 8 to 10 minutes from the home screen to load. Once he did charge Finally I had a dozenor so error messages that all seem to be tied to Java.

  I did a traction battery and tried but unfortunately got the same result.

  Here are some of the messages I get:

  Eception exception: Java.lang.error

  Eception exception: ApplicationRegistry.waitfor (0xf405d42294c6940e) timeout

  Eception exception: Java.lang.error

  Eception exception: ApplicationRegistry.waitfor (0x1c26ebcd7b130582) timeout

  Eception exception: ApplicationRegistry.waitfor (0xf405d42294c6940e) timeout

  Eception exception: ApplicationRegistry.waitfor (0x7491f7b6ae80681a) timeout

  Eception exception: Java.lang.error

  Eception exception: ApplicationRegistry.waitfor (0xf405d42294c6940e) timeout

  Eception exception: ApplicationRegistry.waitfor (0x79a47873b7e8b4e0) timeout

  Etc.

  Once I clicked ok to all these errors, I have very limited access to the phone. I can make/receive calls, open my calendar, messages, camera, but I can't launch BBM, Facebook application, Twitter App, etc..

  
  

  One last thing, when I connect my BB in Blackberry Desktop Software, I get the following error message: Blackberry Desktop Software can not communicate with the connected

  Grateful for your help!

  Steve

  Try to remove the flash memory card and restart full by removing the battery, see how it works. If not helped to take the next step.
  Try resetting the device (it will remove all of your information) Options-Security-security wipe, select also remove all the installed application.
  After this wait until startup normal device then only necessary restor of information (AddBook, SMS, messages)
  Try it, if not helped it will mean reinstall frimware.
  Soory I am writing device

• BlackBerry smartphones help help, thanks

  I can't reinstall my bb Apps in my bb9800 please I need help with this. I deleted it accidentally

  Hello and welcome to the community!

  To reinstall your applications, see this KB:

  • KB17625 How to install or transfer has already purchased apps from BlackBerry App World for BlackBerry smartphone

  For more information, registration keys, see this KB:

  • KB18646 How to locate and enter the license key for an app purchased through BlackBerry App World

  If not, please provide exactly what is happening... 'can't reinstall', has nothing to really to diagnose. If you try the above, please provide accurate results of each stages, with specific characteristics, including the content accurate and complete this error messages.

  See you soon!