BlackBerry Smartphones music stops playing and analysis of media after unlocking

This issue has been addressed in the other two positions, but does not solve the problem of scanning on my "BOLD" or my Curve 8330.

Current phone is a 9000 "BOLD" through AT & T v4.6.0.167 (Platform 4.0.0.157) running with a 8 GB Micro SDHC.

I activated the password via the options-> password and lock my phone with the side key or a timeout.

When I unlock the phone the media application will be to rescan all media files, and if I was playing music the music stops.

I tried to disconnect the battery when the phone was on, wait a minute and reinsert the battery. By not properly turned off the phone, this resulted in three errors in java.lang after reboot. The icons for SMS/MMS, messages, a personal record and the context was different - it was as if the operating system was not completely initialized. After you restart a second time by the power, cycling, or left alt + right shift + delete, phone recovered to its state before the draw of the battery. I would not recommend pulling the battery on the phone without turning the power off from the first.

I've always had a disabled content protection. Allowing protection content adds a task of encryption on the phone lock. The first time I activated the content protection that he brought a dialog box after that I locked the phone who said he would take a few minutes to complete the encryption and the phone was insensitive until the task of encryption has been completed. There was also an icon animated animating during the task of encryption.

I wiped the phone and restored without any change of behavior.

I switched from Sprint to AT & T because the 8330 did exactly the same thing as above. When I upgraded to "BOLD", I used the same card support for 8 GB of my Curve 8330 with the same data and there is no scanner to unlock until a few days later. I have no explanation why other that upgrading the OS but I don't know how to move to a previous operating system that can solve this problem. I also noticed that since I've updated the operating system, I had a ton of busy icons that appear very often where as before the upgrade I have ever seen one.

Is this a bug with the latest OS for 9000 on AT & T?

Anyone know how to fix this?

I found the solution to my problem. This is a bug in the three versions of the OS, I used.

The cause is to set Options-> memory-> encryption Mode that uses the password of security as the option.

Setting Options of-> memory-> cipher any Mode or device will fix the scanning and music to curb the problem to unlock the phone.

This problem has been me angry too long and I hope this helps other people who were not able to limit.

Tags: BlackBerry Smartphones

Similar Questions

  • Video has stopped playing and has not saved after alert imessage

    During video recording on my iPad, I received an alert from iMessage.  The video has stopped playing and did not save what has been already registered.

    Is this a normal behavior or y at - it a setting I can change to block all alerts being recorded?

    Thanks in advance.

    Hi sabfa,

    If you do not want to be interrupted when you save the video on your iPad, try to activate do not disturb.

    Use of do not disturb on your iPhone, iPad or iPod touch

    Turn on or off the do not disturb

    When do not disturb is activated, a Crescent Moon , or half-moon, an icon will appear in the status bar. There are two ways to turn on or off the do not disturb:

    • Tap Settings > do not disturb. Choose the manual option to activate the do not disturb sign now or set a schedule.
    • Swipe up from the bottom of the screen to open the Control Center. Tap on the Crescent Moon.

    Change your settings

    You can also choose if you want to be disturbed:

    • Allow calls to: allow calls from anyone, person, your Favorites or stored on your device or your iCloud account specific contact groups.
    • The calls repeated: If someone calls you twice within three minutes, the call will not be silent.
    • Silence: select silencing calls and notifications always or only when the device is locked.

    Take care

  • Problems with music (stop) playing and attachment

    Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far:

    (1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'default' on the type of APN, he is able to connect to 3 G, but the ad hoc network is not broadcast.

    (2) simple can not play music... actually, it plays for about 1 minute or so and stops. Music app is still running (I tried embeded music + and Cubed) but the music is stopped, not paused. This occurs when you are using headphones or without, when pluged to feed or not...

    Some of the people with the same problem on other forums.

    Clues?

    Which Motorola could maybe check this? Don't know if this Froyo associated...

    Kind regards

    Tiago.

    Hello.

    on the subject of 1) Milestone 2 has a mobile hotspot, not home (ad hoc mode). If you would link to the Milestone 2 the same way as on your WiFi at home.

    You are able to find the Milestone 2 Hotspot as a router, once it starts?

    (2) first of all, please check if the connected music player is not included in auto taskmanagers builtin off list.

    Then check if the time-out in the connected music player is disabled.

    I had this problem once. After a reset, the player worked fine again, so this might also be worth a try.

    tiago_br wrote:

    Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far:

    (1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'default' on the type of APN, he is able to connect to 3 G, but the ad hoc network is not broadcast.

    (2) simple can not play music... actually, it plays for about 1 minute or so and stops. Music app is still running (I tried embeded music + and Cubed) but the music is stopped, not paused. This occurs when you are using headphones or without, when pluged to feed or not...

    Some of the people with the same problem on other forums.

    Clues?

    Which Motorola could maybe check this? Don't know if this Froyo associated...

    Kind regards

    Tiago.

  • Two blackBerry Smartphones music files play at the same time as a ringtone!

    Hello

    I'm usng a BlackberryBold 9700 (AT & T).

    I imported all the contacts from my previous backup.

    I copied a mp3 file from my PC to the device memory. Set this MP3 as ringtone for all profiles. I have not set a ringtone tailored to any individual contact.

    But when I get a call, as well my custom ringtone and the 'Ringer_ClassicPhone' play together.

    In addition, a "Ringer_ClassicPhone.mp3" file is created automatically to

    "' / Memory/home/user/ringtones/Ringer_ClassicPhone.mp3 device"

    Whenever I get a call... I get two hear two sounds... it very annoying... can someone help out me?

    Thank you.

    Do you use another program alert or notification such BeBuzz or Aerize alerts on your device?

    Any other third-party application that sounds?

  • Windows Media Player has stopped playing and ripping of CD

    My Windows Media Player 11 has stopped playing and ripping of CD. I insert the CD, you are prompted to rip, but sometimes even before the CD auto-éjecte without playing or tear. XP OPERATING SYSTEM. Do you want?

    The following links may be worth a visit:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    It is possible that your optical drive needs some maintenance or replacement.

  • Windows Media Player stops playing and will not rip

    All of a sudden my windows closed media player just works fine. He'll read that cd is inserted and it will start playing the first song, but after 1 minute and 3 seconds it stops playing and gives me an error of the cd (no cd) is damaged or dirty (BUT I tried two new CD). Also, when I try to rip CDs, it won't work. It tries and then gives errors. I recently got a new driver, and it worked perfectly. I had trouble with my hard drive and had to replace me. This is the first time I tried to use Windows media player to play a cd, since the hard drive replaced and have had these problems. Please please help. I don't know what to do. I works on Windows Vista Edition Home Premium. My computer is up to date on all updates and I'm stumped. Thanks for any help you can provide!

    Uninstalling and reinstalling Windows Media Player:
    Step 1.
    Uninstalling Windows Media Player:
    1. go to start and in the search type "Turn Windows willing or not.
    2. click on "Turn Windows features on or off".
    3. search for multimedia and uncheck the brand in the face of Windows Media Player.
    4 restart the computer
     
    Step 2.
    Reinstall Windows Media Player:
    1. go to start and in the search type "Turn Windows willing or not.
    2. click on "Turn Windows features on or off".
    3. find the multimedia functions and place a check mark in front of the Windows Media Player.
    4 restart the computer.

    If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

    Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Windows Media Player settings

  • Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

    original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

    Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

    update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • 9650 blackBerry smartphones began to play the sounds of start/stop

    My phone has decided to start playing the sound at startup, shutdown and when I plug in my headphones.  It will do in silence and all alerts off profile as well.  No idea how I can get it to stop?

    Thanks in advance...

    Hi jhanka and welcome to the community of BlackBerry Support Forums!

    It seems that you have sound enabled on your BlackBerry® smartphone event.  To disable this feature, go to Options > Advanced Options > accessibility and change sounds event at no.

    Let me know if this worked for you.

    Thank you

  • Sync blackBerry Smartphone Music Sync and media on "BOLD"

    Hi all

    When I go to Blackberry.com on my "BOLD" there is a link that says "sync your music iTunes office with your blackberry smartphone: find out how.

    When I get the link to download on my PC for the media sync... It does not seem to do anything.

    Anyone who has tried this and got positive results?

    Get it solved!  Just need to reboot my computer for the program to take effect.  Thanks for your help gents

  • My bb bold blackBerry smartphones get more heated and stops loading

    I have a bb bold 9780 which is about 9 months old... recently I started having this problem with my battery to reach extreme temperatures of 45 c and then sign shows a card that supposed to happen when my battery is fully charged, but gets to 40% and does not load then... I have to put my personal number near the ac to cool up to 29 c to recharge it. even the battery life is very poor... She is barely 4 hours on a full charge... I have 2 batteries... I have a 9000 "BOLD" and I of the 9780 and the two we live the same problems...

    Thanxx in advance

    Hello and welcome to the community!

    It is possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

    1. Get a known good and already fully charged battery... use it in your BB and see what happens
    2. Get access to a BB good and the same known... use your battery in there and see what happens

    The results of this will show if your BB or your battery that has the problem.

    What you describe, it is likely that your BB, which is the root of the problem... to test, I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    It is also possible that your BB has a problem at the level of the material which is the cause... and, of course, the internet remote diagnosis and operating system/software recommendations will be nothing if this is the case.

    Good luck and let us know!

  • BlackBerry Smartphones music player goes into mute after every song?

    Hi everyone, I hope someone can help me with a problem I have with my Storm 9530. Whenever I listen to music on it (which is most of the time), unless I'm actually in the form of playing under the application of the music, the sound cut when switching to another song. It is not only stop or pause playback; It actually cuts the song, so if I don't notice it happened for a few minutes, half of the song will be played and the sound does not return unless I increase the volume. Someone at - he heard of that happening before? I know it's a relatively minor issue, but it is rather annoying. She also can't when I'm listening via speaker - I have the problem if you are using the handset speaker or headphones.

    It didn't happen straight out of the box, either - it just started happening a few weeks after I loaded my music on it. I ran diagnostics/security analysis on my computer and on the media card, and both are free of malicious software or corrupted files. I called Verizon Wireless and their technicians could not offer anything that either short-term to Exchange my Storm for a new - I did, but, now, a few weeks after I had a new, I started having the same problem, so I think there must be a setting that I've accidentally changed - but I went through all the options and I can't find something that seems like it would be applicable.

    I really appreciate any insight or help someone of you can give. Thank you!

    Chris

    back up your device with DTM

    close DTM

    Make sure that DTM is version 4.7 or 5.0

    Click on start-run and type cmd

    Press enter

    type:

    CD c:\program files Research in motion\apploader

    Press enter

    type:

    /resettofactory Loader.exe

    Press enter

    This will reset your device to factory settings

    When she returns to the top, test your music and see if you have the same problem

    Performa selective restore

    Open DTM, click Backup/Restore - advanced

    on the left side, click file - open

    Select the backup wemade earlier

    Select ONLY the important databases on the left and send it to the right

    avoid data bases related to the media and all related options

  • Email to blackBerry Smartphones has stopped working! The problem is NOT solved!

    My BB 9780 was working fine a few weeks ago and then stopped my emails.

    I have not added any application or change anything

    I tried this service book record thing, out of battery, removal of e-mails and trying to set them up again (which doesn't work now) and nothing

    So no idea?

    I'm tired of these bugs... I would really like to have a phone that can receive emails, otherwise it will become a big paperweight

    Hello and welcome to the community!

    I know you said you tried some things, but I don't know if you've done these steps exactly. Therefore, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

    (1) registry HRT

    • KB00510 How to register a BlackBerry smartphone with wireless network
    • Please wait a 'registration' message reach your Messages application

    (2) remove and return Service directories

    • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
    • If you do not have access CMIME, continue deleting
    • KB02830 Send the directories for the BlackBerry Internet Service
    • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

    (3) restart to take batt

    • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If not, then you should try remove and re-add your BIS configuration for these accounts. Otherwise, you should contact your mobile provider for formal support.

    Good luck!

  • BlackBerry smartphone email set up and old problems owner

    My brother gave me his old storm. I put my t mobile account chip and bought the data plan and most of the functionality seems to work (I think).

    Email my brother is still in the e-mail button and blackberry cannot connect to the mail server so that I can enjoy his email and put mine.

    Also when I make a call the "My number" shows the number of my brother.

    Is there a way to fix this. He needs to unregister somewhere. He needs to go to his carrier Version to change something?

    Hello and welcome to the community!

    Stop, go back and start over with this:

    • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    Make 100% sure that your brother has completed all its stages before trying one of yours.

    Good luck!

  • BlackBerry smartphones how stop SPAM?

    My business has migrated to Exchange to Google Mail.  I have disabled the link between Exchange and my 8820, then GMail App. installed Google Viola, my GMail is synced with my BB.  So I downloaded Google Sync to get my calendar to synchronize, but now I get hundreds of emails from 'network '.  I found a few articles from the KB and tried these, but the instructions do not match my menu options.  How to stop the madness?

    Normal 0 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui)} / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

    Step 1

    ----------

    All the books of office service remove the BlackBerry smartphone.

    1. in the start screen on the BlackBerry smartphone, click Options

    2. click on Advanced Options

    3. click on maintenance book

    4. in the list of service books, select the desktop [CMIME] service book

    5. display the menu and select Remove

    6. in the list of service books, select the desktop [CICAL] service book

    7. display the menu and select Remove

    Step # 2

    ----------

    If installed desktop manager with option integration with "Blackberry Enterprise Server or BlackBerry Desktop Redirector" then it could happen. If either of the e-mail or redirector settings is displayed, BlackBerry Desktop Manager to uninstall or change the configuration of the BlackBerry Desktop Manager to support the BlackBerry Internet Service.

    In your PC Go to Control Panel -> click on Add/Remove Programs -> select Blackberry Desktop Manager -> click on Change/Remove -> click on modify-> then select the check box for Enterprise Server/redirector instead check the box next to Blackberry Internet Service.

    This should solve the problem.

  • BlackBerry smartphone app error 603 and BBDS does not recognize my device

    Here's the situation: the battery ran out on my unit earlier this week. When I started to charge, the unit will start automatically restart. Before restarting, the messages "error app 603' and 'reset' appeared. If I click "reset", the whole process starts again.

    The previous messages in the forum I read about 'error app 603' suggested I should restore the device settings or reinstall the operating system. I tried to connect my device to my laptop via USB cable, however the computer will only recognize the connected device with a chime at the beginning of the discount to zero, followed quickly by a chime of disconnection being rebooted. The computer or software Deskstop BlackBerry recognizes the device while it is stuck on the '603 error message' app.

    What else can I try?

    Hello and welcome to the community!

    Here's a knockout who deals with this error:

    For the charging of the OS, you can better use this method... on a PC (you can't do this on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. Sorry, already a moot point counts with the error.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    (6) work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of step 6, your BB presents "507" error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

Maybe you are looking for