BlackBerry Smartphones type in Japanese on a CURVE 9320

Similar Questions

• BlackBerry Smartphones hotspot icon disappeared on my curve 9320

  Hello after replacing the battery on my blackberry Curve 9320 hotspot icon disappeared on all connections. And now I can't use the phone as a wi - fi Terminal to connect to the internet with my tablet.
  I read that there is a new 7.1.0.523 firmaware, which is equipped with a hotspot of functions. Advise me to download and install it to solve the problem?

  To check you updated the software of the carrier for your device, click on the link below using your computer.

  http://us.BlackBerry.com/support/apps-and-software/desktop-and-device-download-sites.html?displaycha...

  __________________________________
  Click 'Like' If you want to thank someone. If the problem is resolved to accept it as a 'Solution', so that others can use it.

• BlackBerry Smartphones URGENT help! -Locked phone curve 9320

  I just bought the 9320 BlackBerry Curve, I put a phone lock code and it worked very well and unlocked each time but now after being in my Pocket most of the day a few buttons should were pressed and it says phone locked and on the screen it says-"type of blackberry to continue" (he never said this before) I do this, and then it asks for my code, I put in my original code (4 digits) and it says incorrect code, I am now on my last attempt, what will happen if I try and I no more attempts on the left? He will go on lock down and cost me a fortune to get fixed or is there something I can do to avoid this problem

  would really like to help, I thank you for reading

  Hello and welcome to the community!

  What you're saying, looks like it's your device lock password, which prevents you from your device. Only this password can unlock it, but for one reason or another it just is not be accepted. Most often, it is because of the keyboard... you may think that you type a number, but actually, it's a letter, lock shift is power or some other modifier key is not present in the same State as when the password was created. Unfortunately, with just one more attempt there is very little to try... you get only once chance, so the probability of success is low.

  I suggest you remove your battery, wait 5 minutes, then insert the battery, but wait at least 15 minutes before you try anything. Only, you get a chance, so you must leave your BB to be fully started before trying anything.

  If you fail the last time, what will happen is that your BB will wipe itself clean of everything and be as if it were when you received first of all, including the removal of the password. This is a security feature designed to protect valuable data and personal information on the device of thieves.

  Good luck!

• BlackBerry Smartphones no update is available for Curve 9360

  Hello, Im from India, I have a curve 9360 who currently heads the 7.0 version, I want to update 7.1 I checked via the BB of windows platform software, but it says "no update is avilabe" Please help me... Send me your replay valueable to my e-mail "[personal information deleted]."

  Hello and welcome to the community!

  Based on your description, I can only imagine that you tried only the automatic methods of obtaining an updated operating system. These methods are controlled by your operator, no BB, as to what is available to you. If, for example, BB was released at the level of the OS you want, but your carrier delays in approval, then you will be offered through these automatic methods. Fortunately, there are tricks to circumvent this (assuming that some other carrier comes to present the OS level you want, of course). The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry smartphones, I think I nuked my curve

  I was updating my curve using the new version of the Desktop Manager, and everything seemed to unfold.  At the end of the process I got an error message and my BB screen was white with, I think, a circle, triangle and the heart.  They had a line through them with a message 507.

  I looked at the message 507 and deleted my vendor.xml file and tried to reload everything using the apploader.  That did not work.  Now, my screen is black but the light flashes red continuously two times all the seconds.

  When I try to use the apploader or remove applications in Office Manager appears a little box that says PIN: and the password.  Section PIN allow me to type in my PIN code and it is empty.  It doesn't let me do something beyond this screen and I'm stuck here.

  Suggestions that you guys could give would be greatly appreciated.

  Thank you

  Hi and welcome to the forums!

  This happens sometimes with a Bay "nuked".

  Read this procedure, especially step 2.

  It will take you 20 swings to get it.

  Good luck to you!

  Thank you

  Bifocals

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• BlackBerry Smartphones best memory card for video (curve 8330)

  Hello world. I'm new to this forum. I have a curve 8330 and I want to start taking video with her. What type of memory card do I need? And how much video will each GB of memory hold? Thank you!

  Well, let's say that these are all the videos record you on the BlackBerry, because video recordings of different type will use different compression formulas, but fundamentally from those recorded on the device, you can expect, roughly estimated 10 MB per minute.

  Thus,.

  10 minutes = 100 MB.

  100 minutes (1 hour, 40 minutes) = 1 GB

  1000 minutes (16 hours and 40 minutes) = 10 GB

  1500 minutes (25 hours) = 15 GB

  Pretty much.

• BlackBerry smartphones can not disable password on my 9320 curve smartphone

  Hello

  To protect my phone against unauthorised access, I activated the password on my 9320 curve, so that it hangs after 5 minutes. It works well so far.

  Today, I tried to sync my data with my PC via the BB desktop software. Now, this desktop application asks for the password, but does not accept the password that I entered into my phone.

  I tried to disable the password protection by clearing the checkbox 'Activate' on the phone, but I can't do that (I can't click the "Enable" box, it remains checked with a lock symbol). I can change the password, but the BB desktop on my pc application does not accept the new password.

  Any idea anyone? Help would be much appreciated!

  Best regards

  Chris

  Hello and welcome to the community!

  I think you have two distinct problems...

  Desktop software rejecting your password entry.

  The password requested by Desktop software and the password you assigned to lock your BB are indeed the same password. But what I suspect is that you have a mix of different characters in your device password and you may not notice how you enter on the keyboard of the BB. For example, if your password

  • AB123

  and if you enter

  • a > b > ALT > 1 > 2 > 3

  the result will be

  • ab1er

  You must enter

  • a > b > ALT > 1 > ALT > 2 > ALT > 3

  in order to close with ab123. Thus, in this example, while on the BB keyboard, you think you type ab123, you actually type ab1er.

  On your BB, when you type your password, you should get a moment where each character is indicated in clear before it turns into a *. Watch carefully next time and you will see a surprising result. It will be the exact characters that you type on the keyboard of your PC, because it is in fact your password.

  Lock symbol on the device password, cannot clearly 'enable' setting.

  There are generally two reasons that the locking device password becomes necessary (this is what means small lock symbol).

  (1) you are part of BES or have IT on board strategy that forces the requirement. Given what you describe on when you created the password, I doubt that this is the case, but... If that were the case, you would never have a choice... the first time you used your device, you would have had to create a device lock password. If, by any chance, you are part of BES, then go see your BES admins regarding if they force this situation.

  (2) you have, after activation of the device lock password, activate encryption or the Protection of the content on your device. Once you activate those, they require the device lock password to operate. For example, you can't delete the device lock password until you have first removed encryption or Protection of the contents of your device.

  Good luck!

• Contacts from blackBerry Smartphones Upload in Excel for BB Curve-

  Help - I got a new pc and new bb at the same time - I downloaded my contacts in excel via an older version of the bb desktop mgr-now can't know how do to download excel contact in the curve via Desktop Manager - ideas?

  Thank you

  You can import excel to Outlook, for a single method, and synchronize your Outlook file using the BlackBerry Desktop Manager.

  Another is to export the Excel file to an ASCII text file and then import it directly (without Outlook) using the Desktop Manager.

  Read this link.

• BlackBerry smartphone reset password forgotten on a curve blackberry 9360

  Hi I got a blackberry curve 9360. I entered the password you gave me with it 5 times but doesn't ' t seem to work, so I think it's incorrect. I don't want to keep trying as only have 10 attempts. Is there away I can reset the phone, so I can add new password. I tried to take it to my service provider, but they say they can't do it.

  Any help would be appreciated

  Thank you

  Chris

  Basically, the device seems new, reset to the factory settings and ready to use again.

• BlackBerry Smartphones two questions / issues for BB curve

  I got my BB curve for two days. My provider said I'd be able to use BACKUP ASSISTANT to transfer my contacts from my old phone to my BB. I have discovered this was not true.

  (1) is it possible to manually enter the contacts on a PC and then transfer them to the BB? (I can type much faster on my laptop than on my BB)

  (2) as - I installed a micro SD. received a message that the card contains errors. Any way to re - format the card while installed in the BB or must it be checked and formatted outside the device.

  You can format the card by clicking on options then on memory card. Click the menu key then format the card. I hope this helps.

• BlackBerry smartphone transfer photos from pc to curve

  Hi, I was wondering if someone can help me please.  I recently bought a BB Curve and I transferred some pictures from my pc to my BB using Roxio Media Manager.  However, by simple drag-and - drop photos to the BB, they are transferred to the size of large file created by my camera.  Therefore, the images are long to load on my BB.  I think it is the reason why, in any case.  Am I wrong?  Is it possible through Media Manager to reduce the size of the photo size before transferring them to my BB?  I appreciate any help you can give.

  Just in case this helps someone else, I answered my own question.  In Roxio Media Manager, you click Tools and then Options.  Under Blackberry, you can change the size for saving the photos in the BB.  Photos now much, much faster loading.

• BlackBerry smartphones unwanted suggestions app on the curve 9380

  Hi bb forum, my problem is with my curve 9380 whenever I have my device off and turn on again once I have many suggestions app undesirable even if no sim card is in the device is the problem with these "spam advertising." I would be grateful if you tell me how I can disable this spam. translated from the German with the hope of microsoft-i :-), it is understandable

  Hello benny7777

  Welcome to the Forums of the BlackBerry Support

  How many 3rd party application that you have installed on your device?

  Remove these free 3rd party applications from your device or upgrade these free apps paid version or full to get rid of those who advertise.

  Good luck.

• BlackBerry smartphones all of a sudden my Curve 8520 no send/receive e-mails or Messenger of BB

  My carrier O2 Irl

  Model BB Curve 8520, Smartphone (Edge Wi - Fi) V5.0.0.681 (Platform 5.2.0.67)

  Hi, hope someone can help!

  My BB is a little more than 1 year and worked perfectly. All of a sudden there's a week my email and messenger has stopped working. I am connected to my wifi at home and use data of O2 in the case plan.

  I did a battery without effect pull.

  I rang O2 helplne twice and they talked me through various operations, but could not solve the problem. Finally, they said that as it was purchased in London (it was a gift, but I have received), I needed to return to the store as it was a problem of BB. Not so easy that I live in the western part of the Ireland.

  If I go to the e-mail settings , it says "your device had a problem connecting to the server.

  In Status of the Service - it is said BB Internet Service connection: not connected

  Connection to the BB Enterprise Server: not connected

  Text messaging works very well. Browser works well too and of course I can access my email from here but it is the major concern.

  Thanks for listen/read my post

  Hi Evelynh20,

  You will need to send me a private message with your PIN.

  Because your HRT is empty, looks like your data services are no longer active, but I can confirm that I am able to verify your PIN.

  Thank you

• BlackBerry smartphone app world without wifi 3g curve

  I bought a blackberry curve 3g yesterday and everything works as usual put. All the email, phone, internet and browsers and bb I'm all work perfectly. And bb app world works WITH a wi fi connection. But when I try to access bb app world without wifi the following message appears "you are currently on a service plan that requires a wifi connection to use this application. If you want to use this application out of the wifi please contact your service provider to upgrade your data plan". A similar message on the data plan is displayed when you try to access the app facebook at any time

  I phoned vodafone and they said that everything was going well in their end, and I have all the correct data plan and bb services and keep me here lead. I don't know what the problem is and I would be very grateful for help. Thanks in advance

  cirode23 wrote:

  I tried the steps you told me but unfortunately the same shows.with again the inscription on the THS message there are a number to choose but I chose the one that was "BOLD" already.

  It actually does not matter... When you re - save, all are re-initialized.

  cirode23 wrote:

  I was looking on the part management of connections the phone and when you turn off WiFi, internet service blackberry and blackberry enterprise server each say no link. I don't know if it's relevant or not, because as I said before browsers all work fine.

  It's quite relevant. When cut you the WiFi, BIS (and BES, if you have one) should get to use your carrier data network. Something is certainly not there... then contact them and insist on climbing.

  Good luck!

• BlackBerry smartphones dreaded 0x3b21 error sync with Curve 8310 DM 4.7 on XP pro 3

  No joy with 4.7 DM to DM 4.6 (4.7 by the grip of way on the recording of "modules" when installing like 4.6 done so!)

  Here's the video:

  http://www.YouTube.com/watch?v=u6tS8vvokEM

  (I have many more like this for 4.6, the DM is facing problems in my humble OPINION)

  CK on:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB01451&sliceId=SAL_Pub...

  (where is the Permanent URL of tracing?)

  I'm not alone in this struggle, so I hope that some will benefit from the demo above.

  I had no SUCCESS in sync my curve for more than two weeks... (I'm looking more to the Iphone and Android now).

  That said, I need of those in the know to decipher this cryptic message. In fact, I need a fix. Let someone else read this and tell me the solution or workaround.

  This is my journal of trace

  Mon Dec 15 20:36:59 2008 - Intellisync Log file.

  Mon Dec 15 20:36:59 2008: error loading system failed - {F64973FB-7CB0-460E-9DCC-36A023757617}.4151 a.\iluptbl.cpp line 245
  Mon Dec 15 20:37 2008: error loading system failed - {F64973FB-7CB0-460E-9DCC-36A023757617}.4151 a.\iluptbl.cpp line 245
  Mon Dec 15 20:37:03 2008: error 0 x 80040107-2147221241-2088370138 a.\olkfolders.cpp line 393
  Mon Dec 15 20:37:03 2008: error 0-2088370138 a.\olkfolders.cpp line 322
  Mon Dec 15 20:37:03 2008: error - 2088370138.0 at la.\OlkFolders.cpp line 152
  Mon Dec 15 20:37:03 2008: error 4237.4237 to la.\callback.cpp line 1103

  Landry says:

  I had the same error occur with DM 4.6 with my Curve 8310. I got the job of synchronization at the beginning, but it has stopped working shortly after. Once I made the debug log, I found the same error 0 x 80040107 a.\olkfolders.cpp. So I decided to create a new Outlook profile and switched DM to use instead and everything is good! Just to let you know, I couldn't even change the Configuration of the synchronization without seeing the error.

  I just got the phone recently so I guess while I was trying to understand the configuration that I had made a change somewhere in Outlook or DM and that caused the errors occur. DM uninstall and delete all settings are a complete waste of time.

  Create a new Outlook profile seems to be the fix for me. And like you, the uninstall has been a waste of time. Moreover, I had no joy with the edition of the Configuration of the synchronization without seeing the error.