BlackBerry smartphones when I try to play songs on my BB it get static

Similar Questions

• BlackBerry smartphones when I try to play music on my blackberry curve it is said "media is not available" I don't know what that means... How can I do without taking out the battery?

  Help please

  'Busy media' maybe, maybe your drive innitializing the selected track ready to play. It hangs on media busy for a long time?

  Strange behavior like this can be corrected with a reboot. Take the battery out while your device is still lights up. Wait 20 seconds or two, then re-inster your battery. Wait reset through (about 5 minutes). See if that helps. If this isn't the case, sorry, can't help still. A reboot solves a lot of problems.

• Apple music showing "unauthorized content" when you try to play songs

  Ive used the streaming service for 6 months on the same device with the same Apple ID.  Today when I tried to play songs in my title the same error popped up when I tried to play any song (so not an issue explicit lyrics).  I tried to sign in and out of my id several times but nothing has worked.  What are the possible solutions?

  I had this problem today and tried the same things. Restart the phone worked for me.

• BlackBerry Smartphones when you try to synchronize, it says: this device is not connected to the internet

  IGet this error message: "the computer must be connected to the internet to set up initially sync settings. Make sure you are able to connect to the internet, and then try again. »

  Computer is connected. Checked with for updates Desktop Manager and we are caught in the Web of Blackberry site. What should I do to make it work now?

  Thank you very much for your help!

  Read this link, is another thread with the same problem

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=5...

  Read what bifocal post.

• BlackBerry smartphones when you try to make a call, I get this message: "unable to connect. Call in progress"

  Until a few days ago this phone has worked in the car (Bluetooth) and elsewhere.

  Suddenly, when I was in the car with the phone, I got a call that I could not access. I tried to connect, but the device did not respond.  However, I could cut an incoming call.

  Subsequently, and still in the car, every 10-15 seconds the phone rang again.  Each time, I was not able to accept the call but managed to put out of service.

  This continued for a while until I've finished my trip.

  Later, I managed to stop the ringing by cutting the storm.

  Subsequently, I was unable to make any calls or receive all.  I get the message: "unable to connect. Call in progress".

  I called the storm of my fixed line and it does not sound.

  A problem really disturbing last night was the alarm.  That has been fixed at 5:00 this morning so that I could watch the broadcast eligible Grand Prix.  He didn't ring and went to rehearsal still sounds do not.

  Why my previously sensitive phone suddenly disappeared into pieces?

  You are welcome.

  Good luck.

• When I try to play games on windows vista I get a message saying "this file does not have a program associated with it for performing this action. Create an association in the control panel of the associations. How can I fix it?

  XXXXXX

  Hi Randy,

  Welcome to the Windows Vista answers Forum!

  I have a few questions about your concerns:

  (a) game in which you try to read?

  (b) is this the case with all games or any game in particular?

  (c) you are trying to play the games that are built with Window Vista?

  (d) what version of Window Vista do you use?

  You can also try the suite of measures to define the association:

  1. open the control panel. (Classic view)

  2 click the default programs icon.

  3 click on the link associated with a file type or Protocol with a program . (See screenshot below)

  4 click the extension file type to change which program .exe association opens. (See screenshot below)
  NOTE: It may take a while to load up

  5 click on change program button.

  6 if the list, select the program that you want to be associated with (opens) the file extension. (See screenshot below)

  (A) check the always use the selected program to open this type of program , and then click OK.

  7 if the program is not listed, then click the Browse button and navigate to the .exe of the program you want to default to open the file extension.

  (a) select the program.

  (b) click on the Open button

  (C) check the always use the selected program to open this type of program and click OK to apply.

  This should solve your problem.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to play a game! all I get is "a debugger has been detected _ unload the debugger and try again.

  I did evry thing I can think and what's on the net
  CAN ANY 1 CAN HELP ME!

  Hi buddy300,
  Welcome to Microsoft windows vista forums!

  a. this happens only with games?

  b. remember that any changes made to your computer before this problem?
  Have c. you installed a software debugger on the computer?

  This problem may occur if one or more of the following conditions are met:

  ·         There are programs (for example, an antivirus program or debugging software) that run in the background and that interfere with the game startup process.

  ·          Your sound card or sound card drivers are outdated.

  ·         His Creative Audigy card is installed on your computer. This sound card may conflict with the game startup process.

  I suggest you do the following:

  Step 1: disable the security software on the system tray and then check.

  (Note: enable security software after the test)

  Step 2:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  Step 3: try the steps mentioned in the article

  Games: Error Message: a debugger has been detected: unload the debugger and try again

  http://support.Microsoft.com/kb/812759

  Step 4: System Restore: -to restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose another restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem and then click Next.

  d. click Finish.

  e. the computer restarts and system files and settings are back to the State they were in at the time where the restore point has been created.

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to play the game, I bought I get an error message saying no pixel shader 2.0 support

  I hope that there's enough information in the title area

  Hello Johndruck.

  Pixel Shader 2 designates a characteristic of the graphics cards.  In this case, it seems that the game requires Pixel Shader 2 but does not support your hardware.

  If you mention the particular game and this specific graphics card we can know if it is indeed the case, in which it is not that you can do about it.  Or if something happens.

  If you don't know what graphics card you have to take a look at http://www.windowsresource.net/vista/guides/hardware.php

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Hardware acceleration... When I try to play solitaire?

  I have Windows 7, Vista, because 2 people above have. When I try to play regular Solitaire or Spider, I get the following message:

  "Hardware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game." Make sure that you install the latest video card driver and that hardware acceleration is turned on. "Apparently I have the latest driver for the video card and do not have the slightest idea how to check hardware acceleration...". Thanks for any help.

  Hello

  Thanks for posting the query on the Microsoft Community forums. I understand that while you try to read the Spider or regular Solitaire game, you have an error message indicating that hardware acceleration is turned off or not supported by the video card driver.

  This problem can be caused if hardware acceleration is disabled.

  Method 1:

  Follow the steps to enable hardware acceleration.

  (a) click Start, type display in the search box, and then click Properties to display in the list programs.

  (b) If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.

  (c) click the settings tab and then click Advanced.

  (d) in the performance tab or on the Troubleshooting tab, move the hardware acceleration all the way to the right (Full position).

  (e) click OK and then click Close.

  (f) If you are prompted to restart your computer, click Yes.

  Method 2:

  I suggest you update the video card driver.

  Follow the steps to update the video card driver.

  (a) click the Start button.

  (b) type devmgmt.msc in the search bar, and then click ok.

  graphics card c) Expand.

  (d) right-click on the graphics card and click on set to update driver.

  Method 3:

  I suggest you check out the link.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you find that you cannot play the game please post we will be happy to help you.

  Thank you.

• There is no sound when I try to play the songs of desktop PCs.

  There is no sound when I try to play the songs in my library or radio.  The speakers are very well because I can play from iTunes radio on the internet and local music. I've deleted and reinstalled iTunes, restarted my computer and I know that the sound is turned on. Curiously, it seems that the song moving forward and does not in fact (the blue line streaming lights up blue when I select a song or an advance to the next song.

  See the replies in this thread:

  iTunes no sound

• iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

  I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

  When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

  I use Windows 10 and iTunes version 12.3.1.

  It's the path statement where the music is currently located on my hard drive:

  

  If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

  To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

  

  Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

  Thank you!

  Now iCloud is down, if something happens on the end of apples.

• When I try to play a song on mediaplayer it pause and when you press play there is no sound

  original title: when I try to play a song mediaplayer it go to pause, but it works but no soundit didn't tell paused when I press play?

  I want to play music, but when I press on play stopand breaks but the cursor for the song Carry on, but he didn't have his establishment?
  It's on media player

  Hi Barney,

  1. who is the operating system installed on the computer?

  2. what version of Windows Media Player?

  3 is the issue limited to any specific track/song?

  4 did you do any change in software on the computer before this problem?

  Try running the troubleshooting Windows Media Player tool and check if the problem persists.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• I don't hear my song when I try to play this one?

  Hello!

  So I will try to make a pop-up/lyric type animation in Adobe Flash Professional (I guess it's Adobe now animate) where a song is playing, the lyrics of the song get stressed when the singer says the word (in simpler terms: karaoke)...

  However, when I try to play my animated film of the middle (do not use the test of Ctrl/Enter the video method, but hit just reading the timeline), the song will not play. I can hear the song when I start the animation from the very beginning and not elsewhere (which is super annoying because without a solution to this problem, I continually have to listen to this song over and over).

  So please help me save my mental health by finding a solution to this mess.

  Thanks in advance!

  assign property sync of your sound to flow, no event.

• I can't hear any sound when I try to play music online

  I can't hear any sound when I try to play music online

  Hi estherchery

   

  1. are you able to get sound when you play these songs on the hard drive?

  2. have you tried to play music from another Web site?

   

  You can check below if the steps - help
  a. open Internet Explorer, click the Start button. In the search box, and then type Internet Explorerin the list of results, click on Internet Explorer.
  b. click on Tools and then click Internet Options.
  c. click on the Advanced tab.
  d. under the multimedia section, check the box playing sounds on Web pages .
  e. click OK.

  Also make sure that you have not set the volume on streaming sites to cut and are correct.

   

  I hope this helps.

• Satellite Pro L - error message when I try to play a music CD

  When I try to play a music CD I get this error message >

  + "The version of this file is not comparable with the version of Windows you are using. Check +.
  + system information from your computer to see if you need a x 86 (32 bit) or x 64 (64 bit) +.
  (+ version of the program and then contact the software publisher.) » +

  He plays on my old XP 32 bit office but will not play on computer laptop 64 bit Windows 7.
  The CD is not a commercial manufacturing, but it is important for me.

  Any ideas please?

  Pete

  Hey,.

  Try your hand at playing the CD with Windows Media Player or player exactly?

  You can try to play with VLC media player. It s my favorite player because he plays all audio and video files and it s freeware :)