BlackBerry Z10 by selecting a network type. (select 3g only)

Similar Questions

• BlackBerry Z10 regarding problems of internet connection on blackberry z10 using sim network connection & Derek bsnl

  Dear all,

  I am the first time the z10 blackberry user & use the services on network of BSNL (MAHARASHTRA) India.
  I am able to use internet for awhile when I swith the cell phone on, but inside a few connection minutes is lost & msg read ischeck network connection & try again & then I don't get the connection. Z10 BlackBerry supports the GPRS of BSNL service provided but I am not able to use internet services please help

  PLIs tell me done blackberry z10 will require anti-virus software for the Internet virus threats
  Stéphane jeandonnet

• BlackBerry Z10 Z10 suddenly stopped synchronization of calendar and contact - link gives BB cannot communicate with connected mssg but displays device

  I think that BB link updated the software in March 2015.  I had been very good sync with my laptop Windows 8 with the Outlook calendar and contacts, but this week it stopped.  BB link watch Z0 connected, but says cannot communicate with the device.  I tried the solution of knowledge base - leave plugged phone with a USB cable, power phone off, then back on donkey wait 3-5 minutes for the pilots to complete loading - but none help.  I rebooted the computer and the Z10 several times, but no luck with the synchronization.  Any help is appreciated!

  Try the following steps, which will completely remove all traces of BlackBerry-link device driver entries and may solve your problem:

  1. Uninstall the BlackBerry link.
  2. Open the Device Manager by pressing the Windows key + R on your keyboard type devmgmt.msc , and then click OK.
  3. Click view , and then click Show hidden devices on the menu that appears.
  4. Expand the BlackBerry section by clicking on the + symbol next to it.
  5. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
     • BlackBerry smartphone
     • BlackBerry smart phone
  6. Expand the network adapters section by clicking on the + symbol next to it.
  7. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
     • BlackBerry smartphone
     • Tethering BlackBerry smartphone
     • Virtual private network of blackBerry
  8. Restart the computer.
  9. Reinstall the latest version of BlackBerry link.
  10. Try to reconnect your BlackBerry Z10 to the computer and see if she is able to communicate with the BlackBerry link.

  After back and let us know if it works for you.

• BlackBerry Z10-text to enter in contact with multiple numbers

  Hello world

  I need a little help with sending text messages from my Z10. First some info about the phone:

  • BlackBerry Z10 (STL100-2)
  • OS 10.3.1821 (Beta)
  • Softwareversion 10.3.1.522

  And here's the problem:

  Lets say that there is a contact - by the name of Bob - who is listed under its full name under my contacts ("Bob Miller"). This contact has three different cell phone numbers and a normal (private) phone number. When I try to send a text message, I can choose only "whole" contact ("Bob Miller), but cannot choose the specific telephone number where the text message should be sent to. There seems to be no option to develop the different numbers of contacts.

  It's a fault in regard to the beta-operating system or what I really need to enter all of the numbers of all my contacts respectively as single entries?

  Thanks for your support (and have a good start in the new year)

  Blase007

  Perhaps, I do not understand. Here's what I see. I'm leaving the hub. Select a dial. Select text. Enter a name. All (by type) phone numbers and email addresses for this contact are listed in a drop down below the name. I record the mobile, etc.

  What you do see, how will you choose a number, and what happens when you try to select a number?

  I'm under PassportSQW100-1/10.3.0.1418 by the way.

• BlackBerry Z10 (Z10) how to disable the synchronization of emails?

  Hello

  I currently have a Blackberry Z10, and I wonder if it is possible to disable the synchronization of e-mails, without breaking the connection of data.

  I already tried to manually synchronize emails, but this solution is not to me... emails continue to download automatically.

  Can anyone suggest a fix for this problem? Any help will be appreciated.

  Thank you

  The method will depend on the type of e-mail account you use.  If you use Outlook.com (or Hotmail, Live.com) email ActiveSync, you can go to settings > accounts > select the e-mail account.  Scroll down and toggle "Sync Email" to off.

  Email IMAP (such as Gmail, it is a little different.  It is not a power switch.  If you don't want to switch to manual, you can change the password of account - which would be "unsync" your e-mail of the device.

  For two of them, you would essentially be re-sync all e-mail when you re-connected and incurring data charges.  If you want to do, I'd be on WiFi when the re-login.

• BlackBerry Z10 Z10 MEP0 - locked Sim Card

  Hi all

  I have a very simple problem, but it doesn't seem to be documented

  I have a Blackberry Z10 with my french carrier Orange

  I've received from them a network unlock code (an official)

  I tried this code 10 times and now my camera works fine, but refuse to unlock the network

  I introduce the original SIM card, but it will not unlock the net work. I can't use my phone, even with my Orange SIM card

  "One or more of your network codes are blocked. This preveting your device to use the Mobile network. Please contact your service provider.

  When I contact my service provider "Orange EN" they do not understand and ask me to contact Blackberry "

  What can I do?

  After ten attempts have been used, you only a few choice to unlock the device.

  There are three ways and only three, to achieve this goal.

  * Purchase a MEP code MEP unlocking unlock Internet provider. Be wise and be sure to buy one with a good reputation and good reviews and comments.

  * IF your unit is under warranty, contact your technical support service provider. Tell them that you have this problem that needs to be remounted at the RIM customer service level. I'll warn that most of the technical support people carrier assume first and think that you are talking about security of the release device, and you have to convince them of the contrary and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device that had the code MEP attempts exhaustion and should (and you have to ask) to have the case escalated to a medium technical level RIM.
  * If your camera is out of warranty, contact directly the RIM. See the information to reach us from the Web site: http://ca.blackberry.com/contact/ the options that you want to select to talk to the BlackBerry customer service are 3 (for requests of information, orders, billing, e - RMA etc.) then 5 (e - RMA and warranty).

  Make sense? Good luck.

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• Reloading the blackBerry Z10 Z10 software stuck on logo Blackberry, continuous restart loop, did not help...

  Hello

  Here to find the solution for my beloved BlackBerry Z10 STL100-3

  One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.

  Problem: BlackBerry Z30 stuck in a reboot loop

  Comments/Details:

  1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.

  a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load

  b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.

  2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.

  3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.

  4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.

  After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.

  Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.

  Kindly help.

  Hi J Sanders,

  Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.

  Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.

  However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.

  I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).

  I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.

  I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.

  I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.

  Current operating system version is 10.3.2.2836.

  No SIM or media inserted in it.

  Charge the unit and check if all functions work fine.

• How to change the title for the alert box using javascript in Blackberry Z10?

  Hi all

  I developed 10 Blackberry webworks using the emulator to ripple and Blackberry Webworks SDK 1.0.4.11.In I use box alert and drop-down list in Javascript... When you use those Blackberry Z10... It displays the title for the alert "JavaScript Confirm" box and the "Select"dropdown list... So I want to change the title for these controls. Please me... Thanks in advance...

  Kind regards

  Marimuthu_P

  Alerts are native OS controls and you can not change the titles.

  You can use the WebWorks dialog API to create custom if dialog boxes:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.UI.dialog.html

• BlackBerry Z10 my contacts are acting weird! (dublicate and cannot delete contacts)

  Dear all,

  Today, when I went to my contacts on the Blackberry Z10, I discovered that each contact was dublicated!

  I tried to restart the phone, but I faced the same problem.

  my phone is linked to Google Contacts, so I went to Google Contacts online and there, everything was fine.

  So, I decided to delete my Google account and start again.

  After you remove the Google account, I discovered that there are still contacts on my phone that were not deleted!

  So, I've selected all the contacts and press DELETE... but they have not been removed.

  I had to go and delete one by one.

  After that I can find contacts 'empty '! just empty enteries with no data at all. I had to go and and delete as a.

  What is happening with the Z10

  Hey yasserhy,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  Go to settings > accounts and remove contacts from Google.  Then restart the Blackberry Z10 and add Google contacts and let me know if you are still receiving duplicates.

  I look forward to your reply.

  See you soon.

• Cannot change network type in Windows 8

  How can I change a network or private so that file sharing is allowed? I thought that you could click on it from pop to subwindow network on the right side of the screen, but only my physical network connection is listed.

  More details:

  I have a physical Ethernet connection which is defined as a private network. Sharing files and any other communication on my LAN works fine. I also have a virtual connection through LogMeIn Hamachi which is defined as a public network. I can't find a way to change this. How to change network type in Windows 7 does not work in Windows 8.

  Once, I was able to change the type of Ethernet from the public to the private network by selecting that I wanted to turn on sharing. Although now I cannot access the menu to change that pop on the pane by clicking on the icon of simple network. I was also able to do it once with the Hamachi network, but only the physical card network seemed to save the change after a while. At a time the network Hamachi was not identified, but he has switched back to show as a public network. That's if everything goes though temporary and can be another problem together.

  I don't want to make an exception in my firewall, or make registry changes that specify all unidentified networks are established privately (two suggestions I found on the web so far).

  So it took me a while to find this also, I fixed it by searching for troubleshooting as suggested above. In troubleshooting search box (top right) type homegroup, and then select the resolution of the problems of the residential group, even if you're not using home group, part of the diagnosis allows you to change the type of network from public to private/home, I jumped the diagnostic network also step and allowed me to very easily change the type of network.

• Cannot change the network type

  I change my NAT to bridged networking type.  But now I'm trying to change the option change back and back is not selectable / greyed out.  What causes this?

  Stop the virtual machine. VMware Fusion to quit smoking.

  Open Mac activity monitor. In the search field, type vm

  Kill all processes that start with vm or vmnet.

  Once disabled, start the merge and check if you are able to edit the virtual machine networking

• Why when I backup after selection keep only last system only the old image image is maintained?

  Why when I backup after selection keep only last system only the old image image is maintained?

  Hello

  ·         What operating system is installed on the computer?

  ·         The computer is connected to the domain network?

  If you are using Windows 7 then you can try the steps mentioned below and check to see if they help.

  When you schedule a backup on your computer, all the backup files would be automatically and replaces the old backup data.

  You can follow these steps below to remove the system image backup.

  1. open the control panel (all items view).
  2. click on the backup and restore icon.
  3. as the backup, click on the link manage space.
  4. to select a backup location-
  NOTE: This is for which the backup of files the user is located in. If the backup location is already displayed, go to step 5.
  (A) under the backup location, click Browse.
  (B) go to the backup location and select it.
  (C) continue to step 5.
  5. under backup of user files, click View backups button.
  6. Select the period of backup that you want to remove, and then click Remove.

  See also:

  Learn more about the system image backup

  http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

  Should what backup settings I use to maximize my disk space?

  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

• BlackBerry Z10 Facebook app is full of *.

  The facebook app for blackberry z10 was supposed to compete with the iphone one (courses, it was a joke).

  no possibility to chat

  no control over what type of stream to get (most popular or most recent)

  and no ability to add a place to retrieve

  the Z10 version is worse than my old 9900!

• BlackBerry Z10 Wifi disconnection and deactivation

  Topic: Drops wireless connection and disables wifi radio on TP-LINK router 470N (single band - 2.4 GHz) (Home connect)

  Hello

  I'm Jay payen

  Recently, I have owned BlackBerry z10 and have the latest firmware upgrade version: 10.2.1.2102 updated.

  I am Using Wi - fi Connection to connect the app on my phone, but since I started to use BlackBerry z10 he constantly sinks in connection with home wifi router in addition it also disables wifi radio so that even make any another device branch ed on this router disconnected to the router. Solution is to this problem is that I have to restart my router every time.

  I tried to change due to changes in my router:

  • Mode: since 11bgn mixed with 11n only
  • Enabled SSID Broadcast
  • Wireless security: of WAP-WAP2-staff staff
  • Beacon interval: 100 to 50
  • RTS amplifiers: Of 2346 to 2304

  I am friends here from my phone to the router address reservation.

  Note: My router has the latest Firmware Version: 3.16.6 build 130529 Rel.47286n (v4.0000 H/W Version WR740)

  I use Sony Xperia Acros, HP ProBook 4440 s, Sony Vaio portable Devices in parallel, or any hour would not be problem with connection of abandonment until.

  So, please help me about this situation.

  Modification of the Ant / changes / suggestions are welcome.

  My router configuration:

  • Wireless Radio: turn on
  • Name (SSID): XXXXXXXXX
  • Channel: Auto (canal 11)
  • Mode: only 11n
  • Channel width: 20 MHz
  • MAC address: XX-XX-XX-XX-XX-XX
  • WDS status: disable
  • Beacon interval: 50
  • RTS threshold: 2304
  • Fragmentation threshold: 2346 (fixed)
  • DTIM interval: 1
  • WMM enabled
  • Persons with disabilities in isolation AP

  WAN connection type: PPPoE (AutoConnect)

  Phone settings:

  • Enable connections
  • Hidden off SSID
  • WPA/WPA-personal security type
  • VPN profile
  • Type of band 2.4 GHz
  • Auto obtain IP - on
  • Using Auto-IP - verified
  • IPv6 disabled
  • Proxy disabled
  • Access point inter Handover - on

  Please help me get rid of this situation.

  Thanking you.

  Good day

  Greetings - Jay payen

  Hello!

  Try turning off WMM, it should help you