BlackBerry Z10 cell broadcast 50
Can someone advise how to disable the very annoying "cell broadcast 50' appearing constantly on the Z10?
In the hub, click the overflow (3 vertical points, settings, cell broadcast and put out there.)
Tags: BlackBerry Smartphones
Similar Questions
-
BlackBerry Z10 Wifi disconnection and deactivation
Topic: Drops wireless connection and disables wifi radio on TP-LINK router 470N (single band - 2.4 GHz) (Home connect)
Hello
I'm Jay payen
Recently, I have owned BlackBerry z10 and have the latest firmware upgrade version: 10.2.1.2102 updated.
I am Using Wi - fi Connection to connect the app on my phone, but since I started to use BlackBerry z10 he constantly sinks in connection with home wifi router in addition it also disables wifi radio so that even make any another device branch ed on this router disconnected to the router. Solution is to this problem is that I have to restart my router every time.
I tried to change due to changes in my router:
- Mode: since 11bgn mixed with 11n only
- Enabled SSID Broadcast
- Wireless security: of WAP-WAP2-staff staff
- Beacon interval: 100 to 50
- RTS amplifiers: Of 2346 to 2304
I am friends here from my phone to the router address reservation.
Note: My router has the latest Firmware Version: 3.16.6 build 130529 Rel.47286n (v4.0000 H/W Version WR740)
I use Sony Xperia Acros, HP ProBook 4440 s, Sony Vaio portable Devices in parallel, or any hour would not be problem with connection of abandonment until.
So, please help me about this situation.
Modification of the Ant / changes / suggestions are welcome.
My router configuration:
- Wireless Radio: turn on
- Name (SSID): XXXXXXXXX
- Channel: Auto (canal 11)
- Mode: only 11n
- Channel width: 20 MHz
- MAC address: XX-XX-XX-XX-XX-XX
- WDS status: disable
- Beacon interval: 50
- RTS threshold: 2304
- Fragmentation threshold: 2346 (fixed)
- DTIM interval: 1
- WMM enabled
- Persons with disabilities in isolation AP
WAN connection type: PPPoE (AutoConnect)
Phone settings:
- Enable connections
- Hidden off SSID
- WPA/WPA-personal security type
- VPN profile
- Type of band 2.4 GHz
- Auto obtain IP - on
- Using Auto-IP - verified
- IPv6 disabled
- Proxy disabled
- Access point inter Handover - on
Please help me get rid of this situation.
Thanking you.
Good day
Greetings - Jay payen
Hello!
Try turning off WMM, it should help you
-
Dear all,
I am the first time the z10 blackberry user & use the services on network of BSNL (MAHARASHTRA) India.
I am able to use internet for awhile when I swith the cell phone on, but inside a few connection minutes is lost & msg read ischeck network connection & try again & then I don't get the connection. Z10 BlackBerry supports the GPRS of BSNL service provided but I am not able to use internet services please helpPLIs tell me done blackberry z10 will require anti-virus software for the Internet virus threats
Stéphane jeandonnet -
BlackBerry Z10-text to enter in contact with multiple numbers
Hello world
I need a little help with sending text messages from my Z10. First some info about the phone:
- BlackBerry Z10 (STL100-2)
- OS 10.3.1821 (Beta)
- Softwareversion 10.3.1.522
And here's the problem:
Lets say that there is a contact - by the name of Bob - who is listed under its full name under my contacts ("Bob Miller"). This contact has three different cell phone numbers and a normal (private) phone number. When I try to send a text message, I can choose only "whole" contact ("Bob Miller), but cannot choose the specific telephone number where the text message should be sent to. There seems to be no option to develop the different numbers of contacts.
It's a fault in regard to the beta-operating system or what I really need to enter all of the numbers of all my contacts respectively as single entries?
Thanks for your support (and have a good start in the new year)
Blase007
Perhaps, I do not understand. Here's what I see. I'm leaving the hub. Select a dial. Select text. Enter a name. All (by type) phone numbers and email addresses for this contact are listed in a drop down below the name. I record the mobile, etc.
What you do see, how will you choose a number, and what happens when you try to select a number?
I'm under PassportSQW100-1/10.3.0.1418 by the way.
-
BlackBerry Z10 Help! OS 10.3.3.746
best regards, I have a problem and you install a beta on my blackberry z10 stl100-2 and now I can not degrade the official version
Do you mean that you have installed the beta on our device? Let's be clear, the BlackBerry does not have beta versions of developer to the user. You have installed.
You will have to wait until the official release. Everything I read, you cannot downgrade to an official release.
-
a good free antivirus is available for blackberry z10
You'll have to sideload if from here.
Here is an Antivirus on the BlackBerry App World, but it's not free.
-
BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug
During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).
During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.
Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...
Is there a way to set the default device for different outputs.
for example
Use the mini as the audio device output by default when the music plays.
When I get a call, use the headset as default device bluetooth for phone calls.
When I hang up, swinging back to the mini taken (because it is the default device for audio)
In addition,
I ordered the bridge thinking music that he could solve my problem.
Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.
Should be able to assign the bluetooth services specific to the results of the default value.
for example Audio > mini plug if it is present as a default value if no, he can use bluetooth
Calls > bluetooth headset.
Hope that makes sense.
Dave
The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...
The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)
I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below
Read this new thread to see the solution to this new problem, if it still exists.
-
BlackBerry Z10 is stuck inside the camera!
On the z10 blackberry, sometimes you can't get out the camera... for some reason any the shot does not do anything and you're stuck out there. The only way out is by clicking on the photo album and then get out of there!
BlackBerry z10 is full of bugs!
Hey everybody. We will all stay on the topic and helps answer that the question has been addressed initially. Thank you! ~
-
Hello
Here to find the solution for my beloved BlackBerry Z10 STL100-3
One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.
Problem: BlackBerry Z30 stuck in a reboot loop
Comments/Details:
1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.
a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load
b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.
2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.
3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.
4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.
After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.
Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.
Kindly help.
Hi J Sanders,
Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.
Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.
However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.
I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).
I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.
I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.
I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.
Current operating system version is 10.3.2.2836.
No SIM or media inserted in it.
Charge the unit and check if all functions work fine.
-
BlackBerry, BLACKBERRY Z10 Z10 Os Downgrade
Hello
my name is Ghislain
I m from Pakistan. I m using Blackberry z10 stl100-2 last night I reset my mobile but my mobile is not on and just the red light flashes, then I try to link blackberry but no installed os not on software update so I'm looking App Autoloader Blackberry os 10.3 and install on my mobile now my phone works, but some applications like photos video, video clip and some applications do not work properly I want to just install my previous OS 10.2 on my mobile please help me for this
Thanks in advance
Unfortunately, ignoring all warnings with that you should have to be made, you have now activated your device in a developer test device. There is no intended for general purpose OS 10.3.3. 10.3.3 OS out there only are strictly for the application development process, and they are severely constrained in their functionality. It is an intentional situation, hamper the OS for the developer of the app to specifically test some things. That's why these OS developer packages are never intended to be installed at someones "daily driver".
In addition, the 10.3.3 Developer OS includes a similar restriction 10.3.2. a... Once you move to the 10.3.3 level, you cannot fall back to previous levels or 10.3.2. It is blocked, just like 10.3.2 is blocked to prevent falling back to 10.3.1 or an earlier version.
You're now stuck on 10.3.3 while BB released a production version of the OS 10.3.3. There is no way around that. The only thing you can do is try to make the OS as functional as you can through these tips:
It will not be perfect, and it won't be complete. Some things may work for you, and others could not. But it is not what it will be until BB releases a bunch of OS 10.3.3 production.
-
BlackBerry Z10 who developed the Facebook app?
Dear all,
Who developed the facebook app for blackberry z10. What is RIM? or Facebook?
RIM developed Facebook for Blackberry z10
-
BlackBerry App Timeplay - blackberry Z10
When I go to timeplay in the worlds of blackberry it says "not available on this device", and I have a blackberry Z10 :'(
TimePlay has not yet been published to the z10... You should contact [email protected] and ask them when they will release it. I sent several emails and messages to providers and almost all of them are updating their applications to the z10...
-
100 - 1. is BlackBerry Z10 BBZ 10 STL it supports 4 G in INDIA?
lunch supernet Vodafone in India with 1800 mhz (FDD - LTE). There is such no information on LTE in my phone.
Gaelle says:
Sorry for this kind of mistakes! Sir, I have just a question supporting FDD (LTE) 1800 mhz band 3 in my BlackBerry Z10 model no: - STL100 - 1?OK... so you were wondering on the capabilities of your device. As the States previous post, as well as what I gave to you in post 3 above, the answer is no.
-
BlackBerry Z10 Ayuda! Videos sin pasar al audio PC
Hola a todos! The problem that I have that're estoy pasando videos some of mi Blackberry Z10 al PC y estos some videos tienen sonido y in otros not to escucha, habiendose el mismo dia recorded. ¿A than can be due? Hay than into account than in mi BB so to escuchan, cuando falla al pasarlo estre PC. MUCHAS gracias.
Buenas noches @angel_cg
Bienvenido a los https://supportforums.blackberry.com/
Estas conectándo en modo masivo o storage you BlackBerry smartphone?
Config / Acceso y storage-> activar Acceso mediante USB-> luego masivo USB storage mode.
Los videos are stored as memoria en? O Micro SD device?
Saludos, comentanos...
-
BlackBerry® Z10 problems receiving e-mail on PC at home
I have a Blackberry Z10 and I can send emails to any computer in the world to the best of my knowledge. When I try to send e-mail to the PC at home isn't going not to spend.
The Z10 and the PC have the same email address and when someone sends me an email it appears on the PC and the BBRY.
I talked to Suddenlink, they tell me it is eather a problem BBRY or AT & t. AT & T tells me that this is a problem Suddenlink and support BBRY let's just say that English is not their first language.
Thanks M-G-K
machine guns-gun-kelly wrote:
I have a Blackberry Z10 and I can send emails to any computer in the world to the best of my knowledge. When I try to send e-mail to the PC at home isn't going not to spend.
The Z10 and the PC have the same email address and when someone sends me an email it appears on the PC and the BBRY.
I talked to Suddenlink, they tell me it is eather a problem BBRY or AT & t. AT & T tells me that this is a problem Suddenlink and support BBRY let's just say that English is not their first language.
Thanks M-G-K
This is not a fault BLackberry, when you send an email to the same address, the e-mail appears in the sent and Inbox on the Z10, it also gets sent to the computer.
Maybe you are looking for
-
How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the iPod Touch from Apple.
-
Re: How to use the recovery on Satellite A60 cd
Hello, I want to give my a60 to its factory settings. I found my recovery cd but I lost the instruction booklet on how to use the dam thing! I did it before, but for the life of me I don't remember. can anyone help? Many thanks, Jun
-
spectrex360: Start button / stop / flashing laptop won't turn on
I just got the HP spectrum x 360 on the Store of MS (signature edition). The power button on the side flashes and it won't turn. I know that the battery is charged, because it is connected and there is a connedtion that the led is lit when the power
-
means of terminal configuration
Hi, everybody, I want to measure a voltage on my device NOR-6356. When I choose the configuration of the Terminal, the only one available for this device is incremental,so I get on the website how to set up the differential measuring system, two imag
-
Service Pack 3 (KB955706) settles - error 36B 7
I am running Vista Business - 32 bits - on a Dell Vostro 400 E4500 2.20 GHz - 3 Gig memory and lots of storage. Windows update says I need KB955706 but it will not install . Error B 36, 7. Any suggestions? It's my first time, ask a question in this