BlackBerry Z10 my new Z10 camera stops on its own

Similar Questions

• Windows 7 stops on its own without warning

  My pc running windows 7 Home premium keeps stopping on its own without warning - I checked and its not overheating there are a lot of ventilation. I was told that it may be registry settings but don't see why I should pay for a reg cleaner because I do not know if it will solve this problem

  A Reg cleaner will cause more problems than it will fix. If the PC stops while using it, then see the test below tools. If it stops while his idle then you will need to check and change your power plan.

  First try running Memtest86 +, that runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard? Visit their site to support for the latest drivers as the CD that came with the motherboard may have older less stable drivers.

  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  Discover also Nvidia 'Smoke' test or equivalent ATI.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  For overclockers using stock Intel/AMD radiator and cooling fan
  You can expect temperatures of 35 to 40 ° C in idle and 60 to 65 c max when running Prime95
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ):
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  Also has two tabs (memory and SPD) that indicates the actual speed of the memory
  and 'SPD' tab displays the nominal speeds for each memory location that is filled.
  http://www.CPUID.com/cpuz.php

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Satellite M40 stop under its own

  My bodyguard M40 stop under its own - according to the operating instructions is due to internal heat is too high - y at - it something I can do to fix this problem?

  Hey Kimbo

  In my opinion this closure downs are related to bad cooling.
  You should check the modules of cooling because of the dust and debris inside the laptop. It seems that the fan don't twist with maximum performance and, consequently, the critical level of temperature increases.

  The use of the vacuum cleaner against the vents should help. But be careful.
  If you n t know how to do or you don t have much experience you should ask a technician for help.

• BlackBerry Z10 Z10 shutting down on its own

  Hello

  I am facing a horrible problem with my z10, it stops automatically and never starts until I put in charge. I don't have what happened to her. I tried but to no avail. Help, please

  @bhargavsamm

  What is happening is that your gauge from the battery of the device is turned off-sync with the actual load of the battery. Connect to your OEM wall battery charger and although still connected and powered, the battery a minute to restart. After rebooting to load 100% leave.
  Thus the reading resets false accusation. You may need to perform this procedure, 2 or 3 times.

• need to cut pc where it is plugged it said pc saving settings and then that is it does not stop on its own

  PC does not close down on its own necessary to use the band switch am new to all this what happened?

  Hello Brenda,.

  Often we see shutdown problems as the result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process on Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  The following article describes this process in Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• Dell Dimension E521 starts and stops on its own at random times... a lot of attempts to repair/restore without success! What's next!

  Well, it's a bit of a long story, so I'll try to make it as short and easy as possible.

  My grandmother had the Dell Dimension E521 for some time in December of ' 06.  She had filled the C: drive with a bunch of junk and mandated the bureau with many useless shortcuts.  Later in November 10, she told me he had begun to stop and start on his own time at random, so I tried to do what I could with antivirus scan (AVG Free Edition), remove applications and unnecessary programs and try to demand for system recovery short.  While that makes the computer run faster, it still started and closed on itself.  His house has only the dial-up connection (which is almost impossible to update anything), so I brought it to my house for the best connection around 01/01/11 (9 days ago).

  I could update the AVG Free Edition and Windows updates, and it found and cleared, a Trojan Virus.  The Dell still started and shut down on its own.  My next step was to use the disc re - install for Vista Home Basic 32-bit.  He old programs saved in a folder "Windows.old" on the C: drive and completely re-installed everything back to the original.  After I checked in the "Windows.old" folder and recorded something she didn't lose (such as images and videos), I deleted as much as I could out of it.  The only thing I could not remove from it was 4 'driver files '.  For a while the computer trying to run 'chkdsk' on its own seizure began, but froze in the middle of it.  He finally ended the 'chkdsk' once and didn't try again since.  It downloaded and installed updates Windows of 100 or more on its own as well.

  After all, it still does the same thing he has with housing starts and shut downs.  The closure of downs occur not just in the middle of the execution of a given program; they occur at any time at random, even if I use the computer in safe mode.  She always goes through the whole stops the process with the "logging off" and "closing" legends, it is not as if the electric system is down.  The start-up occur randomly as well, even if a stop is purposely through the Start Menu or hold down the power button.  Sometimes, he's trying to start and shut down on its own several times without fully load.

  Again, sorry this is so long, but I would like to know if there is anything that can be done to get this thing to CUT IT OUT because my grandmother wants as his computer back!

  Well, it's a bit of a long story, so I'll try to make it as short and easy as possible.

  My grandmother had the Dell Dimension E521 for some time in December of ' 06.  She had filled the C: drive with a bunch of junk and mandated the bureau with many useless shortcuts.  Later in November 10, she told me he had begun to stop and start on his own time at random, so I tried to do what I could with antivirus scan (AVG Free Edition), remove applications and unnecessary programs and try to demand for system recovery short.  While that makes the computer run faster, it still started and closed on itself.  His house has only the dial-up connection (which is almost impossible to update anything), so I brought it to my house for the best connection around 01/01/11 (9 days ago).

  I could update the AVG Free Edition and Windows updates, and it found and cleared, a Trojan Virus.  The Dell still started and shut down on its own.  My next step was to use the disc re - install for Vista Home Basic 32-bit.  He old programs saved in a folder "Windows.old" on the C: drive and completely re-installed everything back to the original.  After I checked in the "Windows.old" folder and recorded something she didn't lose (such as images and videos), I deleted as much as I could out of it.  The only thing I could not remove from it was 4 'driver files '.  For a while the computer trying to run 'chkdsk' on its own seizure began, but froze in the middle of it.  He finally ended the 'chkdsk' once and didn't try again since.  It downloaded and installed updates Windows of 100 or more on its own as well.

  After all, it still does the same thing he has with housing starts and shut downs.  The closure of downs occur not just in the middle of the execution of a given program; they occur at any time at random, even if I use the computer in safe mode.  She always goes through the whole stops the process with the "logging off" and "closing" legends, it is not as if the electric system is down.  The start-up occur randomly as well, even if a stop is purposely through the Start Menu or hold down the power button.  Sometimes, he's trying to start and shut down on its own several times without fully load.

  Again, sorry this is so long, but I would like to know if there is anything that can be done to get this thing to CUT IT OUT because my grandmother wants as his computer back!

  Hey tkkcc70

  Here's how to remove the windows.old folder in vista as well as windows 7 after you have saved the data of it

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  read the information below, to see if you can run dell diagnostics by pressing F12 at startup to try to find the problem

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Walter, the time zone traveller

• BlackBerry Z10 camera clock

  I can't find an answer on this. Feel free to point me to a post previous or new OS version conversation that covers this.

  The new passport for Blackberry is a timer for the camera function. What is a feature of OS or hardware? It seems this would be a BONE, it should be available on the Z10, too.  I think that the Passport is running 10.3, but I have not seen anyone that's 10.3 load on another device indicate that the camera now has a timer function.

  To sum up, three questions:

  -What Passport OS run?

  -made BONE to give the camera the timer function?

  -If so, is that OS loaded on my Z10 enable this feature?

  Thank you.

  It is a feature of OS 10.3 and not exclusive on the Passport. I have a Z30 running OS 10.3.0.1052 and it has the peculiarity (which is accessible by opening the camera by pressing the three points at the bottom right).

  I hope that helps you.

• BlackBerry Z10 camera asking constantly for iCloud password

  Hello.  Greetings to all.  I'm new to this forum.  I have Z10, bought the relase day, Feb 10.  I have iCloud (Apple) account and have all my default calendar, contacts with this account information.  When I synced for the first time, all my entires of calendar and contacts appeared.  Subsequently, every now and then, peripheral Z10 asks the iCloud password, which is very frustrating.  Any solution for this?  Please suggest me.

  Hi Rama,.

  Welcome to the BlackBerry support community.

  Please try changing your iCloud password, then updated on the device as a test.

  Let us know if you continue to be invited after making these changes.

  Thank you.

• Fault of blackBerry Z10 camera

  My camera showing z10 livelihoods cannot start after the software update 10.3

  I suggest you do the hard reset first: connect your phone to wall charger and when turned on, remove the battery and leave it for 10 minutes. Reinsert the battery, switch on and check if you can use the camera now. In some cases, the media card is the cause. So you want to remove your media card to see if it has the camera effect.

  You can check the status of the camera using BlackBerry Expert virtual: choose a test > front and rear camera test.

  Note: you provide your phone number in your profile, which is not recommended because it's public forums and that there might be someone send you spam messages. Changing Menu settings on the top left of this page.

• How to install a .bar file in my Blackberry Z10 camera?

  Hi all

  I have a .bar file, now I want to install in my Z10, but don't know how?

  Kindly help me.

  Hi erAjayGoyal,

  The bar of the folder you created using momentics?

  Or - someone gave you a bar of file?

  If you have created the folder bar - then is your device in mode 'development '?

  (mode settings/security & privacy / development)

  A previous thread:

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/installing-bar-file-to-BB10/TD-p/...

  Please notify.

  -gary

• BlackBerry 10 camera settings advanced BlackBerry Z10 camera

  When I see apps like ProShot and Nokia camera and features they provide on Windows phones, I really feel that a lot could be done with the camera of 10 of BlackBerry. BB10 camera still missing features like the definition of ISO and speed of stutter like we do in manual mode in not even expensive phones Nokia Lumia.

  Is there by any chance possible for BlackBerry to introduce these advanced features to BlackBerry 10 camera in future updates?

  Give your comments or suggestion here www.blackberry.icanmakeitbetter.com could help speed things up.

• Password blackBerry Z10 camera stuck 'on '.

  Failed to add a Microsoft Exchange ActiveSync account to my Z10. Since then, the device requires a password to unlock. Under Settings/Security and privacy/device password, it says "political COMPUTER requires password device to be together.", and the on / off toggle is grayed out.

  I want to disable the device password. There is no Exchange account for me to remove the device because adding that he had failed.

  Any suggestion is welcome.

  Hello mitcheubanks,

  Sorry to hear that you have a problem with the removal of the password.

  To clarify, under settings > accounts there is no account balance?

  If you drag to the bottom of the top of the window (where you see the settings, Bluetooth, Wi - Fi etc.), you see a Briefcase icon or the icon of the balance? If Yes, are you able to tap into? You see the icon of deletion?

  Thank you!

• BlackBerry Z10 camera cannot be started

  Well when I restart the device, the device starts, but the background is all black as if something is blocking the violence... Then when I close the application icon of the camera becomes transparent, and cannot be opened. The second time I open it it says camera cannot be opened... I did everything, including for sure... Nothing works... Help, please?

  No, I don't have it.

  What I would honestly recommend returns to the unit. Being a nine, you don't need the headaches of something doesn't work is not out of the box like that. Exchange it for a new job.

• BlackBerry Z10 camera in use, can't use the camera

  I have 4 programs that use the camera and now nothing works as it says that the device is used with another program.  I've deleted all the programs, but still couldn't use my camera phone.  I have given all the programs I deleted and still no change.  Any thoughts?

  Programs that use the camera are Panorama 360, waze, flashlight and Skype.  I kept offshore for contact problems associated with Skype Skype

  jefferyh wrote:

  I have 4 programs that use the camera and now nothing works as it says that the device is used with another program.  I've deleted all the programs, but still couldn't use my camera phone.  I have given all the programs I deleted and still no change.  Any thoughts?

  Programs that use the camera are Panorama 360, waze, flashlight and Skype.  I kept offshore for contact problems associated with Skype Skype

  What operating system do you use? Have you tried to re - start the phone after removing the above programs?

• BlackBerry Z10 camera Flash problem

  Hallo,

  I don't know when and why it started, but my flash is not working when I take pictures in dark places.

  I can't put in seting flash ON or OFF. The option is inactive.

  I tried the app BB virtual Expert. It works is to test the flash and the camera takes pictures with flash.

  I think some app has changed the 'register' in the OS. I uninstalled all the 'Free Flash' a 'torch', but it still does not work.

  Can you help me?

  THX a lot

  Karel

  Hello

  It's because of the shooting mode selected. Menu flash is active in the 'normal' only shooting mode. In any other mode shooting long process enabled so device cannot use flash such long period of time