BlackBerry Z10 stupid but very interesting question on your blackberry microphone remote

Similar Questions

• Yet another (but hopefully different) question about hashCode()

  I hope you can bear with me here, because this issue is long enough.
  
  I was stuck with a problem for quite a while: how to determine a hash for a ratio has / b, involving BigIntegers (and therefore, potentially very large values for a and b ). I would also add that it is a problem of efficiency , not a general.
  
  Curiously, the comparison of the two reports is NOT a problem, as this can be done gradually and includes a few very quick due diligence; but hash - especially focused on the value of hash - a particular problem, since it is to calculate a value that must be equal to any value.
  
  Simplest is, of course, reduce the fraction, then calculate the hash, but I'd like to eliminate the step of reduction (which always implies division, even if the fraction cannot be reduced; and at least 2 if possible) if I can.
  
  If someone ate a pie of brain, I'd be very interested to know your thoughts, even if they are not complete solutions. What worries me here is that my math is simply not up to the problem.
  
  Winston
  
  Published by: YoungWinston on May 14, 2011 22:13

  jverd wrote:
  This will give zero in all cases when N< d.="" so="" at="" the="" very="" least,="" you'd="" have="" to="" test="" first,="" and="" flip="" to="" d.divide(n)="" in="" that="">

  I know.
  50% of the aura N/A Ratio = 0. Then, they will end up in the same compartment.
  But the method of random generation of correct Ratio? Or they must be distributed to the Pseudo-hasard between 0 and 2 ^ 2000?
  Your method strongly favours ratio between 0 and 1 and discriminates against the reports between, say, 25 and 26.

  Published by: baftos on May 14, 2011 22:36

• BlackBerry Smartphones that will sound so stupid, but I need help...

  can someone please PLEASE tell me how to turn my ring volume upwards or downwards? This seems stupid, because I spoke on messenger with it and got on the internet... but I can't lower my ringtone! (by the way I just received this today = D)

  Hi and welcome to the forums!

  Firstly, the volume control buttons are at the top right, two buttons together.

  Then you can use profiles (ringtones) to decrease increase

  Let me you the procedure for you, the curve of which model do you have?

  Thank you

  P.S. There is a big difference between 'stupid' and NEW... 'stupid' not POSER OF QUESTIONS!

• Experiment with 4K. Two very simple questions.

  I recently bought a Panasonic AG-DVX200 and started shooting a few 4K 23.98 and UHD 2160 59.94. After taking the files in a new iMac 5K with a lot of RAM when viewing the video, it is full of moire during playback but seems well when stopped. If I share (export) the resulting file by using the preset of the device to Apple 4 K seems well. Why the video looking for shit in FCPX?

  Second question. I also tried to use the 'Apple device 4K' preset on a timeline of 1080 p and the exported video is superb. As good or better as using the preset 'Apple Device 1080. Is there something wrong in using the device to Apple 4 K predefined in a timeline 1080?

  Thank you very much for all your comments on these forums. It really helps.

  Cheer.

  Tom

  LLA moiré depends on the content. Switch the Viewer to the best quality of reading rather than performance.

  What hen you select 4K check in the settings if you want to come actually 4K. FCP isn't uprez for export.

• 2 very simple questions about 6225 PCI card

  Hello world

  I use for the first time a card PCI of 6225 (80 all entries). This card is linked to two junctions of SCB-68 block and my goal is to use it to acquire 40 Equations signals. Using the wizard DAQ, I came to these conclusions:

  1) the first 8 of my 40 Equations entries go out first to a block?

  (2) the block junction n ° 1 for each differential signal, I need to put a bias resistor 10 kohm between each AIGrnd and the V (-) signal. That's what I did with the other cards X 622. To do this with block n ° 2 too, I have that pin n ° 22, 9 and free to use all of my 32 43 signal. Is this correct?

  I know that these are 2 very basic questions, but if someone could just answer for confirmation, it would be great.

  Thank you very much

  Kind regards

  User

  Hello

  (1) the 8 first entries go to the 1st exit of block as this pdf for Connector 0 shows.  For the last pin of the Connector 1 you will find the information in the screenshot below:

  

  (2) according to your source impedance, you must connect your source as described in figure 4-5:

  

  Or 4 to 6 of the l M-series user manual(page 4-15 to 4-18, so with a coupled polarization resistance also between the positive terminal of the source and AI GND).

  Then if you have a noise problem, you can follow these documents:

  How to eliminate ghosting of my measurements?
  http://digital.NI.com/public.nsf/allkb/73CB0FB296814E2286256FFD00028DDF?OpenDocument

  Reduction of the impedance of the Source of an analog input Signal
  http://digital.NI.com/public.nsf/allkb/CF83426BC3AC514A86256C10005A4771?OpenDocument

  With the help of a Gain (voltage follower) unit with DAQ hardware buffer
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4494

  I hope this helps.

  Kind regards

• I don't sound stupid, but I'm going to lose all my files, games or whatever it is, with the upgrade?

  I don't sound stupid, but I'm going to lose all my files, games or whatever it is, with the upgrade?

  By 'upgrade', what you're speaking of?

  Windows 8 for Windows 8.1?

  Windows 8.1 for Windows 10?

  In any case, you * don't *-however, something can and probably will happen not doing a full image backup just before changing throughout the operating system would be, at best, careless.

  Also - if you mean Windows 8.1 for Windows 10: do not trust a single scan or test to tell you whether or not the upgrade will be successful.  You should check with the manufacturer of each product (hardware and software) to ensure that support them (the real manufacturers of real products in question) is in place for the newer operating system.

• How can I add two very simple Questions to a slide?

  Hello

  I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:

  ====================================================================================

  Scenario of

  The slide must contain two questions:

  Question 1: with two check boxes for the options Yes and No

  Question 2: with five check boxes for options 1 2 3 4 and 5

  A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.

  ====================================================================================

  The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.

  
  

  If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.

  
  

  For reference, I use 8 Captivate.
  

  
  

  Thank you

  
  

  Ross
  

  I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.

  Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training

  Advice - Training interaction - Captivate blog

  BTW, I moved this thread to the Quizzing subspace.

• Very general question VMWare Workstation

  Hi all

  So I have a very general question of VMWare Workstation.  Here's the context: I am with a very small company and we do desktop for windows software.  My development computer running Windows7, and I have an XP Virtual Machine to the test on this platform.

  However, I would like to test the deployment and operation of my software on different versions of Windows 7, Vista, XP, etc.  However, our society cannot afford to spend $1000 on all versions of Windows, we can find.

  Are there operating system free everywhere (which is legal) images that are intended to be used by developers?  Or, you must purchase a full license for all of these operating systems, just to do a little testing?  How do you all your images of BONES?

  I know that this is a very general question (and not technology), but I would appreciate any input all have just general experience.

  Thank you!

  Dan

  MS offers subscriptions MSDN and Technet, containing all kinds of licenses for the use of test and development - according to the level.

  André

• How can I vote for an interesting question on the dedicated forum?

  Hello

  I know that Muse is a brand new application, but there are several relevant question - in my opinion - that should be considered first.

  After much navigation (!), I found a forum where you can vote for these interesting questions users have faced.

  Unfortunately, I'm unable to vote for one of theses messages if I am connected.

  Is there something to do to get this "right to vote"?

  I really want to participate in this improvement, just gimme the tools to do!

  Thanks for your response

  We know a few emails as of late in the ideas of the forums section and thus our Admin had turned off their.

  I have re-enabled them so you can vote and add ideas and apologize for the inconvenience.

  -j

• Entities does not Contribution - very basic question

  Hi guys,.
  
  My apologies for this very basic question: I am very new to Hyperion, with just one week of training! Anyway, I'm building a basic model and have noticed that my features are not in the dimension value roll altogether the [Contribution]. This means that entities do not roll upwards!
  
  It was suggested that problem was that I needed a Sub consolidate in the rules, but I put the attribute 'ConsolidationRules' = n. In the documentation it is defined as "N to use the consolidation by default and eliminations".
  
  I was wondering is there anything else that is needed to use default groups, or do I need to create rules?
  
  Thank you
  G

  Why do you think that's not driving? If your building rules are set to "n" you don't need rules.

  Make sure that your presentation was made to IsConsoldiate. Make sure that you're displaying a "Parent.Child" to total Contribution.

• HP 2540: 2540 very difficult Question.

  HP 2540 very difficult question!  Where to place a document on the glass before scanning/printing? (Upper-corner L, R, L corner, lower corner R, center top corner).

  Hello

  You find all brands (for paper formats) along the coast and a symbol that shows you where is the corner?

  Kind regards.

• I have a HP laptop with Windows 7 (OS) with 64 bit, but very slow. Can you suggest a way to start my fast pc.

  I have a HP laptop with Windows 7 (OS) with 64 bit, but very slow. Can you suggest a way to start my fast pc? Most of the time it doesn't quite work.

  Hello

  There are a number of possible reasons, your computer may run slowly - virus infection or malware, missing to defragment the hard drive, too many programs loading at startup - and all with different causes / solutions. So here goes:

  Virus/Malware - Download, install and run these scanners (only Avast so you do not have your own antivirus installed):

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  Avast Antivirus: http://download.cnet.com/Avast-Free-Antivirus/3000-2239_4-10019223.html .

  Disk Defragging - install and run this app: http://download.cnet.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.html .

  Startup programs - install this application, then select start only the programs you need to run at startup, as your antivirus, firewall, but not your Disk Defragmenter (examples):

  Splash Guard: http://download.cnet.com/Startup-Guard/3000-2239_4-10958203.html.

  Also, your system's drivers are up-to-date? Updated the driver can also slow down your system. Go to HP.com and insert the complete your laptop model number in the search box to find your latest drivers.

  Let me know if these speed up your pc.

  Kind regards

  BearPup

• Downloaded AdobeStock_96500492.jpeg but very bad quality, how cancel and get a credit of 1 image to my account?

  I downloaded AdobeStock_96500492.jpeg but very bad quality, how to cancel the purchase and get a credit of 1 image to my account? When I downloaded the preview, I was informed that the quality had been reduced, but the original is much better. I just needed a texture gold. It is of low resolution.

  Hello

  I've added a license credit to your account as a gesture of goodwill.

  Thank you

  Bev

• I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  Please see this link

  Non profits

  If your institution not-for-profit or charity meets the conditions above, you can browse the education of Adobe software versions. Once you are ready to buy, you will be asked to present evidence or your qualification status when ordering.

• Is there independent configurations, or just that kind of creative things Cloud with monthly cost? I tested the Lr5 before trial and now wishes to purchase the full version, but not interested and won't pay a monthly fee for it. All the opti

  .. .and the same thing here, I apparently just typed in the header...

  Is there independent configurations, or just that kind of creative things Cloud with monthly cost? I tested the Lr5 before trial and now wishes to purchase the full version, but not interested and won't pay a monthly fee for it. The options seem to grow the CC, but would like to know if there is any means possible to get the version stand alone more. Thank you in advance!

  Frustration is closer...

  There is still an option purchase on https://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softwar e_sl_mostpopular.html

  Make sure you only select between upgrade/Full and Mac/Win.