BlackBerry Z10 Z10 Blackberry and 5 GHz Wifi network

Similar Questions

• HP s 4540: 2.4 ghz and 5 GHz wifi network

  Hello

  I have hp probook 4540 s. I want to improve my network wifi for 2.4 ghz and 5 GHz can so pls u halp me how can I connect with 5 GHz network

  Thank you

  Azadali wrote:
  FCC ID: VQF-RT5390

  It is a Realtek RT5390 wireless adapter pcie with single 2.4 GHz band.

  To upgrade internally, you need to ensure that PCIe wifi candidate adapter requires only a 1 x antenna 1.

  ASUS has done a number of dual-band usb dongles and simultaneous R/T.

  http://www.ASUS.com/Networking/Wireless_Adapters_Products/

• Problems with the WEB BROWSER blackBerry Smartphones, use not wifi network to open some Web sites

  Hello I'm owner of BB BOLD 9900 OS 7.1... for the last two days I am facing a pretty annoying problem with the BB browser.

  It means not affects the device... it just annoys me.

  When I TURN ON my WiFi on my BB with the network carrier Sim already homepage active who has a Active on it and open the web browser BB, according to the website on which I open the web browser chooses between the internet Wi - fi OR internet BIS carrier which is weird. BECAUSE a default if the wifi is enabled, then the web browser MUST use internet wifi network carrier for navigation. YOU TUBE, FB and TWITTER.com all use my carrier netwrok to open bt soon I open BBC.com or CNN or any other site the wifi symbol appears on the right side and so it uses the wifi network... and disappears when I opened THE 3 SITES you tube FB n twitter.

  My knowledge is that when you activate THE wifi network, the WEB browser is intended to USE the wireless internet, NOT the internet carrier

  The next time I switchd off the the carrier signal, and then Turned ON one internet WI - FI and then opened the web browser of BB. so now all the opend website with wifi internet bt as soon as I open YOU TUBE or FB or TWITTER.com it post a comment... .that cannot visit the web page when the carrier is off. Please turn on the radio n try again... I mean IT SHOULD OPEN with internet wifi? WHY do network carrier sim to open the web page?

  I have checkd my browser settings and they are default and also my wifi settings I have reset the... the problem still persists?

  any idea wats going on?

  Please help is needed I'm annoyed about this problem...

  Thank you

  MR. KIWI... Good news... .i went to my carrier service center... Solvedo Problemo!

  Go to your service books and remove directories of service WAP browser in all directories of service WAP 3 I don't know the exact name, but all are related to the browser... WAP config something like dat... Just remove dem... .and HARD restart your fone... and try to use only wifi on your device with your carrier network off...

  mine worked... Let me know on urs... so now, the browser uses my wifi instead of my network provider when both are running...

• 9.3.2 iOS that wake up my iPhone and iPad a cellular connection. They connect to my wifi until I use them. This means that the activity of the Baker all arrives on my data connection and not my wifi network at home. How can I fix it.

  iOS 9.3.2

  My iPhone and iPad wake connected to cellular data so that I have a home network and expect things to happen on my network home. It costs me in the case of the background activity while I'm SLEEPING on my cell the att network connection. How can I fix?

  Thank you

  Barb

  Maybe a WiFi Assist. On the devices go to settings > cellular > scroll all the way down > Wi - Fi help > Toggle Off. See if that helps.

• Can't see the devices connected to 2.4 GHz WiFi

  I recently bought and set up a R6220-100NAS Netgear with the 2.4 GHz and 5 GHz WiFi signals available less than a month ago and updated to the latest firmware, when I ran my initial installation (although I don't know which version it is). I have 1 PC connected to my router and other devices (including my printer) are connected wireless.

  Since the installation of this new router, I noticed that I cannot print on my Canon PIXMA MX892. I was not able to solve this problem, as much as I would like, but so far, I've been able to determine that the printer is only able to connect to my network of 2.4 GHz, and I can't ping from my PC (ping to the IP address response comes back under the name of "unreachable" as opposed to the typical error "request Ping" can't find host).

  I tried ping my Smartphone when it is connected to the 5 GHz WiFi band and had no problems. When I spent my smart phone to the band of 2.4 GHz and ping its IP once again, I got the same message "inaccessible".

  Some tips on how I can still fix this and restore my print capabilities?

  Problem solved. I did a factory reset on the router (and manual reconfiguration) and I can now print and ping on two WiFi networks devices successfully. Looking at the configuration settings that I saved before the reset, it looks like isolation wireless has been activated for the 2.4 GHz WiFi network. It was set to '1' in the .cfg file.

  It was my suspicion from the beginning, but I couldn't find the setting in the router installation options.

• 5 GHz WiFi on E2500 has stopped working

  I had my E2500 with 2.4 and 5 Ghz WiFis with different names, works very well for months until yesterday 5 GHz WiFi stop working and I got my PC back to 2.4 ghz. When I go to the page of the router-> status-> wireless networks in the 5 GHz network shows an empty address, channel by n/a and the width of the channel by n/a, while 2.4 has fill out them correctly. I tried using different settings for WiFi, but nothing has worked. I also tried resetting the device and update the firmware. How can I know that the 5 GHz interface is not faulty and the cause of the problem?

  I found a solution to my problem: I came back the firmware to the previous version (I had upgraded to the latest version 2.0 front) and now the radio works fine. It seems that the firmware has not been properly tested.

  Thanks for your help!

• iMac ceases to recognize WiFi networks at random

  In recent weeks, our iMAC ceased to recognize WiFi networks at random.  We will use Safari or Chrome and suddenly the taskbar will specify "resolving host" and internet connection will be lost.  Within 2-3 minutes, all the WiFi networks that were previously seen in Network preferences will disappear.  If restart us the iMAC, the WiFi network will work very well for 15-30 minutes, then it will be happening everywhere.  It is frustrating to have to restart the Mac frequently! What is also very ironic, is that when WiFi networks disappear for the iMac, our iPhones (2), the iPad and laptops (Dell and HP) always recognize wifi networks. Spoke to the Apple support and made us go to El Capitan, instead to call again, I thought that I would try this community.

  Here is our contact information for operating system and the actions we have taken so far.  Would be grateful to anyone who helps solve this problem.

  Operational details:

  • El Capitan - OS10.11.5
  • iMac (27-inch, mid 2010)
  • 3.2 GHz Intel Core i3
  • Processor: 4 GB 1333 MHz DDR3
  • 807 GB 1 TB storage is free
  • 2 WiFi networks available through DirectTV / AT & T 2.4 G with 5.0 G available
  • I don't have an Ethernet cable plug near this iMac

  When he saw this problem, I tried the following solution:

  • Reboot, obviously works but annoying and not a systemic solution
  • Network preferences > > turn off WiFi and then turn it back on
  • Create the new location and reconnect to WiFi networks
  • Previously on Yosemite and recently upgraded to El Capitan, did not work
  • Remove the preferences.plist, the network.identification.plist, the message files - draw .plist hoping to empty cache network
  • DHCP has changed IP manual and additional figures added to the final figure of IP address on the IP address of my iPhone
  • Changed automatic DNS server to direct DNS server from Google
  • Renewed DHCP lease

  No chance until then wouldn't like anyone's support there!

  Thank you

  a few items from apple are here please read it could help you.

  OS X El Capitan: the problems of connection to Internet

  OS X El Capitan: on Wireless Diagnostics

  OS X El Capitan: If you cannot connect to a Wi - Fi network

• WiFi networks fall too often

  Hello

  This drop router often 2.4 or 5 GHz WIFI networks.
  When this happens, none of my devices (5 of them, including IOS, Android, Windows and MacOS) can't see WIFI networks.
  the 5 GHz range falls more often than the 2.4 but the 2.4.
  They are never at the same time.
  Finally, it is, randomly or if I reboot the router.

  I also noticed that I always see 2 networks of comments that I put in place. Those who never fail.

  Wired connections also abound.

  When I connect to the router config page (URL or via the application engineering) the router shows no errors. In the router settings section, the two WIFI seems to be shown as being active (there is a button refresh here, but I don't know what he does)

  I already have RMA Router 1 times since last November, but the problem never went away.

  I'm getting really disappointing with this brand now.

  I hope that I'm not the only one in this situation and that Netgear will do something about it.

  In the meantime, my brother wanted to buy a new router and I have already told him to stay away from Netgear.

  Hi al59571,

  Please see this article.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23655/~/troubleshooting-intermittent-wireless-or-dropp...

  The router has 1 year hardware warranty for replacement from the date of purchase. You can check the support for this team.

• BlackBerry Blackberry Z10 protect and PIN issues

  Hello

  I recently lost my Z10 at the time I arrived at a computer to try to locate, it seemed that the battery had been taken out of it. I have a few questions however on blackberry protect and PIN.

  So my first question is, if the phone is deleted (I didn't erase my phone using blackberry protect because I don't know the answer to this question) my blackberry protect service be wiped from the phone as well?

  My next question is PINS more still Z10 accompany the material they come up with? I want to know that if my friends and I try to add the PIN code, it'll still be a valid PIN / work. I hope that if I am able to show someone the phone and uses it, I'll be able to get the police to work with the service provider in the phone tracking to the bottom/blacklist it. I realize that on past generations of BB PIN was closer, but I read a few other places that there is a way to eliminate even the pine TREES. I wonder if it is true and also if Z10 are less permanent?

  Any help would be appreciated, I usually try to go through something to bring the person who took my life more difficult for phones. It is essentially the only thing I can do to make me feel better about the situation.

  Also on a side note: in blackberry protect, under manage devices, the State of my still active said Z10. But I can't locate, view messages or make it ring.

  Thank you advance to anyone who takes the time to answer!

  Hello again,

  I decided to do a little investigation when my curve 9320 I was using before I get my Z10. I supported it upward and wiping it on entering the password wrong 10 times. Then I tried to locate once he dried, turned on and connected to my network. No luck once the phone has been cleared, I couldn't follow it or get in touch with her anyway to protect. I guess that my once I've left is now trying to keep a trace on the PIN...

  Pretty disappointed that protect no longer works when the phone is deleted. I was hoping she could be removed only by connecting to your blackberry ID on the phone or the computer to remove it.

• BlackBerry Z10 tries to remove newly BBID Z10 configuration and use an existing BBID

  Hi, I recently bought a new Blackberry Z10 camera. I started setting up. I wanted to create a Blackberry user ID if I entered an email address that I use frequently. I got an error message stating that the e-mail address is already in use. I thought that I never used a Blackberry ID/product/service forward. I couldn't understand why this email address was used, then after you have re-entered it a few times I decided to try using another email address that I use as often. I put the BBID using another email address, however I have not confirmed it yet. A few hours later, I realized why Blackberry gave me an error message on the first email address, I tried to use. On two or three years I created BBM on my Iphone with a Blackberry ID for text messaging. I used a couple of times and didn't use it thereafter. The next day I went in my email account to see the email confirmation for the BBID I put in place a few days ago. Rather than confirm the BBID, I saw an option: If you did not create or do not recognize this account, remove this BlackBerry ID. Which is what I did. I deleted it. Because I didn't use this BBID. Then I tried to connect the Z10 with the BBID, I created three years ago (before logon on the phone I have to reset my password on the site Web of Blackberry). I could not log in with the old BBID, I created while all the information is correct (I can log on to the Web from Blackberry site, see my profile and settings). The phone tell me the username and password is wrong when I click on the button check that it is just for the opening session with my information screen. The problem is that the phone keeps the profile settings and e-mail address since when I put in place a few days ago and I can't get rid of it, because it is associated with the phone. I read on the forum somewhere, that, in order to get rid of a BBID who is on the phone, I would need to do a reset and community support of Blackberry. Not sure if this is true. The issue is when I try to do that, I have to enter the password that I deleted so I'm stuck BBID. Don't know what to do. I'm all new to Blackberry and would appreciate any support you could give me to solve this issue.

  Hello and welcome to the community!

  Unfortunately, you are now in a difficult situation...

  Mioprincipe wrote:

  I read on the forum somewhere, that, in order to get rid of a BBID who is on the phone, I would need to do a reset and community support of Blackberry. Not sure if this is true.

  Indeed, this information is true. The only way to remove the association between a device and a BBID must WIPE the device. But... you've discovered...

  Mioprincipe wrote:

  The issue is when I try to do that, I have to enter the password that I deleted so I'm stuck BBID. Don't know what to do.

  This means that the device must execute the last branch 10.3.2.xxxx of the operating system, which includes the anti-theft function required by the Government, which requires that before a device is deleted, the anti-theft function BBProtect be first to be defeated before the wipe. Without this step, after the wipe, the same BBID is required (to prevent a thief using the device at all).

  Here is some useful information (all the "official" BB staff):

  • http://helpblog.BlackBerry.com/2015/06/getting-started-with-anti-theft-protection-in-BlackBerry-10-o...

  If you purchased your appliance from ShopBlackBerry, Amazon (U.S. / UK) or the Porsche Design Store, please communicate with BlackBerry using the details on our page contact us.

  Contact us blackBerry > http://blck.by/1MxtqPR

  If you bought your device with a wireless service provider, or a retail store in person, or online, please contact them for assistance.

  When you contact your point of sale, please have the following prepared;

  DO NOT PUBLISH THIS INFORMATION IN THESE FORUMS

  -Your BlackBerry ID
  -Proof of purchase such as a reception
  -A copy of your wireless bill that shows your phone #.
  -A copy of your ID issued by the Government

  Good luck!

• BlackBerry Z10 Z10 kills my Devolo WiFi network

  Hi all

  got my Z10 two weeks ago and I am very satisfied with the unit with the exception of a question which is a kind of show stopper. Whenever I connect the Z10 to my home Wifi network, after a while my entire network goes down. All devices of lose the connection, and I have to power cycle the WiFi access point to fix. This only happens with my Z10 so I disabled it's Wifi for now until I have a solution. The model and the brand of my WiFi AP is Devolo dLAN 500 WiFi. I have already sent an email to the support of Devolo and I await their response. Reading through here and on crackberry forums it seems that I'm not the only one with this problem. I tried setting fixed channel, WPA, WPA2 etc but no matter what I do, the problem is still there. Is there anyone with a similar setup / problems, please give me a shout.

  Thank you very much

  Gerry

  If this can help someone; This problem seems to be resolved by installing the firmware Devolo 3.0.0

• Synchronization of calendar software blackBerry Z10 Local and 2 Playbooks

  Is there a way to sync Z10 cal and 2 Playbooks with link. There is a checkbox sync calendar/contacts but the link won't let me check box. Thanks in advance, perhaps an upcoming feature.

  To the last link help 1.2.3.23 no way to save local calendar other than Z10 is yourself. This is the last struggle with problems of calendar and e-mail because I went out and bought 3 paper calendars and they work great. Anyone want to buy a 9700, Z10 and 2 Playbooks?

• HELP blackBerry Smartphones: I BIS, but BBM and Gmail only works on network and NOT on wifi

  Hi all, sorry in advance if this problem has already been postponed.

  I myself recently had a bold 9900. Everything worked well, but I met a pretty big problem which I spent hours looking for fix on the internet today, but nothing helped. So I decided to make an account on here to see if anyone can inform me personally with a solution. My carrier is O2 (UK), but I use the sim card while living abroad in Czech Republic. I don't meet with this problem on my previous BB (torch).

  I buy a monthly BIS data plan and it is still active at this moment - it is clear from "EDGE" that appears at the top right of my screen when the network is enabled or "3 G" (with the blackberry icon) .
  When the network is running - my BBM, Twitter/Fb apps, Gmail, browser all works fine (as it should) because of my BIS.

  The problem:

  Once I turn the networkand activate wifi WE, my BBM and Gmail work & the BB icon disappears from the top corner, instead of move slightly down to accompany the icon of intensity of the wifi (which would always be the case on my previous BB) right.

  What is even more strange, given that BB icon is still missing, is that my BB Facebook and Twitter apps still work fine with wifi on, just like the Explorer... So why not BBM and Gmail?

  (Which makes me ask: I thought that the BB Facebook and Twitter apps necessary BIS to work?)

  Anyway, once I enter the 'wireless network' > menu > 'Troubleshooting' > "Wifi diagnostic", the following errors are displayed:

  (1) UMA connection error. Status: Error of wireless network

  (2) infrastructure blackberry connection error.

  I tried to return the directories of service, which made no difference.

  Help, please!

  Well Yes, I tried yesterday (restore to factory wireless settings) does not. I have now restored the mobile to factory settings and I'm relieved to say that the BIS now works just the wifi.  

  Thanks for your advice anyway.

• BlackBerry smartphones, I am able to update the Date and time on WiFi?

  With a 9800 smartphone (3g, WiFi) 6.0 Bundle 278 (v6.0.0.141, platform 6.4.0.64)

  I'm running a few tests with my camera and I took out my Sim Card. I would like to know if I can update the Date and time on WiFi only?

  Note, I am able to navigate successfully.

  No, you can't do a simple navigation with wifi only

  Update on time is made by the carrier or by the RIM servers. No SIM means no access to these data.

• [Issue] How data is transferred when you use BlackBerry (NFC) Tag? WiFi Direct? Bluetooth 2.1? Bluetooth 3.0?

  Hello

  I saw a bunch of videos of demonstration of tag BlackBerry of all the cool things you can do with the NFC, but it wondered, what happens if all my other antenas wireless, WiFi and Bluetooth, are out of?

  NFC can be used to transfer data, but it is not good for large quantities. I looked a little further and I found this cool video showing the difference to use Bluetooth 2.1, Bluetooth 3.0 high speed and Wifi Direct to transfer large files, such as videos. BB10 already does support Wifi Direct? Bluetooth 3.0 high speed?

  I hope that BB10 supports ALL the performance and maximum compatibility.

  I don't know where to post this question so here's. Please move was a better place. I think that the community needs a session of general development for wider issues.

  See you soon!

  Hello

  Tag BlackBerry, and the APIs available for developers will automatically perform the best way to transfer the data. NFC supports something called "connect transfer" and are the largest payloads or certain types of data (photos, for example) rather than by peer-to-peer NFC, NFC mode data transfer is just used to negotiate alternative transport. In the case of the BlackBerry smart phones, this alternative will be bluetooth.

  For users of touch devices, there is a brief 'conversation' between the devices on the NFC and this translates into a bluetooth connection set up and data transfer initiated through the bluetooth connection faster. This is all without the usual matching process. After reaching the stage of bluetooth devices need closer will be of course.

  The same principle applies to both 7 BlackBerry and BlackBerry 10. In fact talk us a bit about this in our latest article on BlackBerry 10 NFC API:

  http://supportforums.BlackBerry.com/T5/native-development/BlackBerry-10-sharing-using-NfcShareManage...

  I hope this helps.

  For more information on see NFC:

  http://supportforums.BlackBerry.com/T5/Java-development/NFC-article-and-code-index/Ta-p/1538775