BlackBerry Z10 Z10 encryption to Activesync strategy?

Can someone tell me I know if policy 'require device encryption' (Exchange Server 2007 SP1) took effect? The encryption of the device in the parameters setting always showed as offshore, would have had to change or this policy does something different? However, the Playbook created a partition of work BlackBerry Balance and placed, exchange of data.

I noticed the same thing on my Z10, with Exchange 2010. I called support RIM and refers to this article: (http://www.blackberry.com/btsc/KB33619). Apparently there is a problem with device software 10.0.9.xxx and 10.0.10.xxx, where the phone will not apply encryption via an ActiveSync policy. You must manually enable encryption. The alternative is to install BES10 and strengthen the encryption on the scope of work.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Z10 problem creation account Exchange ActiveSync on Z10

    Hi all

    I'm trying to set up my e-mail account on a Z10 using Exchange ActiveSync. Setting up the same account on a Samsung Galaxy S3 works perfectly well.

    When I use the normal installation procedure, I enter my e-mail address and password and get back this:

    Expected, delimiter: line 1 122 (122 char) column

    If I pass by "Advanced", the error message is the same, except for the number 194 instead of 122.

    The account in question is an Office 365 E3, and I would avoid using BBCS (if it works even with OS 10 devices; there are conflicting reports on the net).

    I asked the carrier, I got the phone, and they said they couldn't help because it wasn't their e-mail account. I asked Microsoft and they told me they couldn't help because it was a problem of BlackBerry. I asked BlackBerry, and they have not yet responded.

    Can anyone help?

    (By the way, why is there an error message from a JSON reader in the standard library of Python concerned with creating a Exchange account? Because that's when the message comes. Microsoft is not known for their enthusiastic embrace of JSON, they love with XML).

    --

    Christian

    Problem solved. I consider the problem with security and limit myself to the waves of suggestions, but since that alone would suffice to guess the problem, why bother?

    The error occurred because my password contained double a quotation mark character. Somewhere in the account of the Z10 configuration procedure, something assembles a JSON structure, among other things, the password entered by the user. This password is placed in a quoted string, but the quotes inside it are not escaped. When the structure is passed to the next step, it is not parsed, and the error occurs.

    I wonder why I seem to be the first user to have this problem.

    TL; Dr: have no quote characters in your password.

  • Lost blackBerry Z10 phone

    Magalie

    Today, I have a bad day. I lost all the money this month (I'm a student), and the worst is that I lost my blackberry z10 . When I knew I lost it, I was very angry.although it is an old phone, I purchase form someone else, but with me, it's a treasure and a friend. I'm going to protect.blackberry.com, then replace 'Flag as stolen', because I want the thief have only a brick. but now I think that if the thief do not turn the data or does not connect with a wifi then sell it to another people. It is verry bad for them. They lose money from verry for a brick. (I live in vietnam, security is not high, I don't want to aggravate some for someone, but I don't want someone not know my data on my phone, I install 10.3.2, I don't know what happens to my data on my SD card, I want to, it can be earsed).
    You can check what is happening with my data, as it can be not to connect to the internet.
    Thank you verry much!

    Oh sorry for your loss!

    thanhzen2009 wrote:

    but I don't want someone not know my data on my phone, I install 10.3.2, I don't know what happens to my data on my SD card, I want to, it can be earsed).

    Your inserted SD card is not affected by Protect or whatever it is. To protect your card data SD Media you would have needed to have the encryption on the card.

    thanhzen2009 wrote:

    You can check what is happening with my data, as it can be not to connect to the internet.

    No, you can't.

  • BlackBerry Z10 too many emails

    Despite setting the e-mail on the Z10 acocunts only sync emails for the last 3 days, our accounts for all of the district are drawn on the Z10s.  Any ideas what you can delete is no longer on the handheld only.  Contacts are also dupolicated/quadrupled for no reason.

    Hey birdh1976,

    Welcome to the community of BlackBerry Support Forums.

    Thanks for the question.

    My apologies, this feature is not available in 10 of BlackBerry. With ActiveSync BlackBerry Z10 is connected directly to the server, and if you delete an email it will remove the Exchange Inbox.

    Let me know if you have any other questions.

    See you soon.

  • BlackBerry Z10 (Z10) how to disable the synchronization of emails?

    Hello

    I currently have a Blackberry Z10, and I wonder if it is possible to disable the synchronization of e-mails, without breaking the connection of data.

    I already tried to manually synchronize emails, but this solution is not to me... emails continue to download automatically.

    Can anyone suggest a fix for this problem? Any help will be appreciated.

    Thank you

    The method will depend on the type of e-mail account you use.  If you use Outlook.com (or Hotmail, Live.com) email ActiveSync, you can go to settings > accounts > select the e-mail account.  Scroll down and toggle "Sync Email" to off.

    Email IMAP (such as Gmail, it is a little different.  It is not a power switch.  If you don't want to switch to manual, you can change the password of account - which would be "unsync" your e-mail of the device.

    For two of them, you would essentially be re-sync all e-mail when you re-connected and incurring data charges.  If you want to do, I'd be on WiFi when the re-login.

  • BlackBerry Z10 Help! OS 10.3.3.746

    best regards, I have a problem and you install a beta on my blackberry z10 stl100-2 and now I can not degrade the official version
    

    Do you mean that you have installed the beta on our device?  Let's be clear, the BlackBerry does not have beta versions of developer to the user.  You have installed.

    You will have to wait until the official release.  Everything I read, you cannot downgrade to an official release.

  • BlackBerry Z10 antivirus

    a good free antivirus is available for blackberry z10

    You'll have to sideload if from here.

    Here is an Antivirus on the BlackBerry App World, but it's not free.

  • BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

    During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

    During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

    Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

    Is there a way to set the default device for different outputs.

    for example

    Use the mini as the audio device output by default when the music plays.

    When I get a call, use the headset as default device bluetooth for phone calls.

    When I hang up, swinging back to the mini taken (because it is the default device for audio)

    In addition,

    I ordered the bridge thinking music that he could solve my problem.

    Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

    Should be able to assign the bluetooth services specific to the results of the default value.

    for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

    Calls > bluetooth headset.

    Hope that makes sense.

    Dave

    The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

    The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

    I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

    Read this new thread to see the solution to this new problem, if it still exists.

    http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

  • BlackBerry Z10 is stuck inside the camera!

    On the z10 blackberry, sometimes you can't get out the camera... for some reason any the shot does not do anything and you're stuck out there. The only way out is by clicking on the photo album and then get out of there!

    BlackBerry z10 is full of bugs!

    Hey everybody. We will all stay on the topic and helps answer that the question has been addressed initially. Thank you! ~

  • Reloading the blackBerry Z10 Z10 software stuck on logo Blackberry, continuous restart loop, did not help...

    Hello

    Here to find the solution for my beloved BlackBerry Z10 STL100-3

    One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.

    Problem: BlackBerry Z30 stuck in a reboot loop

    Comments/Details:

    1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.

    a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load

    b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.

    2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.

    3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.

    4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.

    After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.

    Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.

    Kindly help.

    Hi J Sanders,

    Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.

    Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.

    However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.

    I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).

    I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.

    I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.

    I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.

    Current operating system version is 10.3.2.2836.

    No SIM or media inserted in it.

    Charge the unit and check if all functions work fine.

  • BlackBerry, BLACKBERRY Z10 Z10 Os Downgrade

    Hello

    my name is Ghislain

    I m from Pakistan. I m using Blackberry z10 stl100-2 last night I reset my mobile but my mobile is not on and just the red light flashes, then I try to link blackberry but no installed os not on software update so I'm looking App Autoloader Blackberry os 10.3 and install on my mobile now my phone works, but some applications like photos video, video clip and some applications do not work properly I want to just install my previous OS 10.2 on my mobile please help me for this

    Thanks in advance

    Unfortunately, ignoring all warnings with that you should have to be made, you have now activated your device in a developer test device. There is no intended for general purpose OS 10.3.3. 10.3.3 OS out there only are strictly for the application development process, and they are severely constrained in their functionality. It is an intentional situation, hamper the OS for the developer of the app to specifically test some things. That's why these OS developer packages are never intended to be installed at someones "daily driver".

    In addition, the 10.3.3 Developer OS includes a similar restriction 10.3.2. a... Once you move to the 10.3.3 level, you cannot fall back to previous levels or 10.3.2. It is blocked, just like 10.3.2 is blocked to prevent falling back to 10.3.1 or an earlier version.

    You're now stuck on 10.3.3 while BB released a production version of the OS 10.3.3. There is no way around that. The only thing you can do is try to make the OS as functional as you can through these tips:

    It will not be perfect, and it won't be complete. Some things may work for you, and others could not. But it is not what it will be until BB releases a bunch of OS 10.3.3 production.

  • BlackBerry Z10 who developed the Facebook app?

    Dear all,

    Who developed the facebook app for blackberry z10. What is RIM? or Facebook?

    RIM developed Facebook for Blackberry z10

  • BlackBerry App Timeplay - blackberry Z10

    When I go to timeplay in the worlds of blackberry it says "not available on this device", and I have a blackberry Z10 :'(

    TimePlay has not yet been published to the z10... You should contact [email protected] and ask them when they will release it.  I sent several emails and messages to providers and almost all of them are updating their applications to the z10...

  • 100 - 1. is BlackBerry Z10 BBZ 10 STL it supports 4 G in INDIA?

    lunch supernet Vodafone in India with 1800 mhz (FDD - LTE). There is such no information on LTE in my phone.

    Gaelle says:
    Sorry for this kind of mistakes! Sir, I have just a question supporting FDD (LTE) 1800 mhz band 3 in my BlackBerry Z10 model no: - STL100 - 1?

    OK... so you were wondering on the capabilities of your device. As the States previous post, as well as what I gave to you in post 3 above, the answer is no.

  • BlackBerry Z10 Ayuda! Videos sin pasar al audio PC

    Hola a todos! The problem that I have that're estoy pasando videos some of mi Blackberry Z10 al PC y estos some videos tienen sonido y in otros not to escucha, habiendose el mismo dia recorded. ¿A than can be due? Hay than into account than in mi BB so to escuchan, cuando falla al pasarlo estre PC. MUCHAS gracias.

    Buenas noches @angel_cg

    Bienvenido a los https://supportforums.blackberry.com/

    Estas conectándo en modo masivo o storage you BlackBerry smartphone?

    Config / Acceso y storage-> activar Acceso mediante USB-> luego masivo USB storage mode.

    Los videos are stored as memoria en? O Micro SD device?

    Saludos, comentanos...

Maybe you are looking for

  • Cannot install app «Print Edition»

    Firefox is installed on my new gateway. After you download the application, it would not install because Firefox has not been installed? My system is Windows 7, 64-bit, 8 GB of ram and 1 terabyte hard drive. Is there a 64-bit version of Firefox? Coul

  • Error since update with Kik and images.

    So, I recently updated to the latest iOS and reopened Kik. But when I opened my overview of the Gallery to send a photo, I am greeted by gray screens with icons of cloud on them. I tried several solutions with iCloud because I assumed that it comes t

  • Satellite L650 Wireless disconnects and connection cannot be retrieved

    Hello everyone, I have a connectivity problem with my 3 year old Satellite L650, Windows 7... I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.After some time (it can be minutes or hours)

  • don't recoognized Macintosh HD

    I wanted to downgrade my iMac legend form El mountain lion (because I need os x 10.8 to my interface) To restore hang upwards and after that, when I turn on it was too slow start and when loading to start over after that turned off! I reboot IMac and

  • Satellite L550D does not recognize DVD

    Hi people, New on here have just got my laptop last week.It is a standard configuration with Windows 7 64 bit and the DVD - RW is a Pioneer model. I used CD no problem to install programs, etc, but yesterday put a DVD movie into the machine for the f