BlackBerry Z30 power button broken for a BlackBerry Z30 purchased on amazon.co.uk

Similar Questions

• my ipod 5 does not light, I am of the view the home and power button down for 10 to 30 seconds, but my home button is stuck or at least does not, what should I do?

  so I have my button home broken for some time, not only does not respond as broken in the iPod so I couldn't press it or anything. It is only today that my iPod will not turn back. I normally would just hold the home button and the power button for some and things would turn out right away but now I can't use my home button so I'm stuck without options. I left that he plugged for a while but still nothing. I tried to clean the home button. So what should I? get a new home button or just get an upgrade anyway.

  You could bring to the Apple store and let them to evaluate it. If an upgrade is financially feasible, I would recommend that you're not just fixing the home button will help. Also note that if you do any repairs on the iPod it will void your warranty (if you have one.)

• Satellite 1110-Z20 - Power button broken

  Hello

  the power button on my Satellite 1110-Z20 is lost. It seems that the button must only be fixed with spring and will work again.

  However, I don't know how to open the case without making any damage.

  Does anyone know how to open the laptop to fix accessnd one the power button?

  Thank you very much

  Hello Kevin

  The small top panel in proximity to know that you can carefully remove the lid of the unit.
  But if your warranty is still valid, I suggest you contact the ASP for the repair.

  Good bye

• Power button broken bike e

  Unfortunately my just power button stopped working today. good news is I found a temporary solution.
  
  According the room store download:
  
  1 screen off and lock
  
  2 auto screen on...

  Screen off and lock will create a power button on your home screen that will help you to turn off the screen.
  
  Screen-auto will help you activate your screen by tapping twice on the proximity sensor. (the g-sensor proximity sensor switch)
  
  If your screen is off right now, simply plug in charger and get these applications as soon as POSSIBLE.

  I hope that this will be a temporary relief

  Tap the screen On / off by the khanh ly seems to support both ignitions and extinctions and seems good. I just downloaded and I'll let you know how it is

• 2510: printer power button broken

  Start button / stop broken printer won't turn on I recently bought 4 new ink does not correspond to the new printer.

  You feel you printer is fixable or better to buy a new one?

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• Pavilion 23xi: my hp Pavilion keep showing the power button lock I tried all the solutions again, it won't work

  Hp power button held for a minute and the cord broke off electricity by holding down the power button and it's always the same problem in not falling is not on what can that I please

  The button lock feature works / stop is set by pressing the power button for 10 + seconds.  It is deactivated again by pressing the power button for 10 + seconds.   That's all there is to it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Press the Power button twice at startup?

  On my new E530 I just realized I have to press the power button twice for the laptop start. At first, I thought that I tap it enough hard or the calendar has been disabled or something, but after many tests I came to the conclusion that it is in fact mandatory that I press the power button TWICE in the order the laptop to start.

  My question is, is this normal / design?

  Google gave was contradictory and inconclusive answers:

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-edge-E420s-start-up-button-issue/t...

  http://forums.Lenovo.com/T5/ThinkPad-edge/power-button/TD-p/307704

  A credible person can sound here?

  Much appreciated and thanks in advance!

  Hey, Gleipnir,.

  When I pressed the button of power quickly as that, in my view, your description it would take two thrusts to get to power be as the first was not strong enough to register. I believe that this does not work as expected and you should not be concerned.

  Best regards

  Hiro

• Monitor power button stuck or broken

  1908FP 2407WFP and probably many other models

  I have 7 or more Dell monitors and just got my first broken power button today. After disassemble and see the very fragile plastic piece, I am happy that I regularly let sleep instead of using the button. The 10-cent plastic piece is made very thin and flexible, and the actual switch is not directly behind the button (they are all other buttons), but moved to the side to make room for a LED. For this, the plastic, the button bow severely whenever it's pressed. In my case, the button has lasted a few years before the tabs broke the key at both ends showing how fragile, it had become. Firm pressure could probably break it even when new. Because the tabs are so small, the only realistic "repair" is to remove the broken button, use something to push the switch and allow him to sleep. The button band could easily be replaced if only someone could sell them.

  Found similar posts on this forum & youtube

  tclarke,

  We have a monitor of components such as the power button. Simply, we replace all under warranty. You might find someone on ebay selling components to monitor.

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• Tungsten e2 how hard reset with broken power button

  I am getting rid of an old Tungsten e2 and need to reset to factory settings. However, the power button is broken and I can't find another way to do a hard reset without using the power button. Is there another way? Thank you

  Welcome to the HP support community!

  Someone wrote a program years ago this very dilemma!

  Go to the following page and download and run the program named "Hard Reset".

  http://palmpowerups.com/downloads.php?cat_id=2

  WyreNut

• Always need to disconnect, press the power button for 10 seconds wait...

  I bought an HP computer for a few years (Pavilion a6695it), it still works well. But these days, I can't pitch up. I tried the power button on the front of the computer, nothing happened. Then, I searched hp's site. finnally, I find this article http://support.hp.com/us-en/document/c00241069

  In the version English, the article is here:

  http://support.HP.com/us-en/document/bph06788

  Power light is on or blinking

  Hello youlichika,.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are not able to on your desktop, and I'd be happy to help you in this business!

  According to the document troubleshooting problems of energy supply, were you able to follow the steps 3 to 9? If so, what were the results?

  If you came at the end of the document, and always empty the power of the computer to turn on, you can find a spare (5188-2627) through one of the sites available by following this link.

  I hope this helps!

  Best regards

• Options for the power button Windows XP to ask what I want to do when the Start button / stop is pressed

  Original title: Start button / stop - "ask me what to do" - where is it?

  Under XP, when I pressed the power button I could put it "Ask Me what to do." This is very useful for two reasons:

  -My PC is under my desk, and if I'm not careful, I can press the power button with my knee...

  -To turn off, I can hit the power button / stop rather than start etc, then choosing.

  The feature exists on Windows 7 (press alt + F4), then how do you link that to the press the power button? Why this was removed?

  See you soon,.

  Chris

  Hello

  Yes, there are only work-a-rounds and that is why I suggested that
  thread. There are also a few details about why he was abducted that
  are especially that in general as it caused more problems than it solved. Then
  for those who have used the function correctly, it is a concern when trying
  to restore its functionality. To my knowledge, is not 100%
  this case, just ability cannot be added in by a registry setting
  as support has been totally removed. If this is the case, then the work - a-
  towers or possible 3rd party solutions are the remaining options.

  Please let us know if you find a better solution.

  I hope this helps.

• Meeting place for Dell 11 Pro 7130 power button / stop does not work

  I just bought this camera and can not get the power button to turn on the screen and off as suggested by the manual should be possible.  If I press and hold the power button then it made a stop hard and if I held down when turned off it will vibrate for a second and then turn on, but a short press does nothing when Windows is running.

  Tried short diagnostics and no problems found. Updated the BIOS to the A13, the drivers updated to the latest versions of all available installers, updated firmware screen scanner and camera. I saw a post from early 2014 with the same question where someone suggested to put it off to quick start, but that has not changed anything either. All Windows updates have been applied.

  How can I get the power button to work?

  If after trying a few things more that I decided to give at the moment and made a sweet sleep on the desktop shortcut, so I had a quick way to get at least the screen turns off. The command to execute is: rundll32.exe powrprof.dll, SetSuspendState 0,1,0

  This seems to be more than Hibernate because it should boot from the bios whenever it turns on (although the arguments given him say no to the hibernation), but it was better than nothing.

  I tested it worked a few times then rebooted the system. When I did this he decided to install updates which he said yet that all were waiting. When he started upward the power button now works.  I don't know what has changed or if the execution of the order makes a difference, but at least it works now.

• My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  * Original title: charging the battery

  My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  How can I get the computer to start the battery again?

  The battery is probably faulty. You can say as follows:

  1. Shut down Windows.
  2. Remove the battery.
  3. Wait an hour.
  4. The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
  5. Insert the battery.
  6. Wait an hour.
  7. The power supply is hot? If so, the battery is recharged.
  8. Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.