BlackBerryContact returned from remote sensing

Hello

I hope someone can help me; is there a way to determine from the BlackBerryContact returned from remote research that the BlackBerryContact came from a distance search rather than a local search? A field in the contact?

Thank you

David

No, there is no field that indicates if the contact came from a remote research or is stored locally on the BlackBerry smartphone.

Tags: BlackBerry Developers

Similar Questions

  • How to use refcursor type returned from the remote database in the local database

    Can anyone say is how they use the refcursor use type returned from remote database in the local database using dblinks.

    See MOS ID 750126.1 doc ORA-24338 when trying to return a Refcursor over a database link.

  • Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need a Google Earth app (India)

    Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need an app (India) of Google Earth?

    https://www.Google.com/search?q=Google+Earth+app+India&ie=UTF-8&OE=UTF-8

  • wiring of remote sensing and shielding to the Earth, 9237 requirements

    Hi, I have a set of scales (full-bridge) connected to a 9237 (in a 9172 chassis), and I have two questions regarding the wiring:

    (1) requires remote sensing that you have two additional sons detach from the cell, to the place where the wires attach to the wheatstone bridge?

    (2) where I should connect the shield of the load cell 50/60 Hz noise? to the Ex-terminal (as well as the Ex-fil)?

    Thank you

    Claire.

    Hi Claire,

    (1) Yes.  Drivers of remote sense must be connected to the points where the voltage wires connect to the bridge circuit.

    (2) Yes.  The shielding must be connected to the reference of the unit, who is the EX - for the 9237.

    See NI 9237 Instructions and specifications manual and this DevZone for more information.

  • ORA-17628: error Oracle 19505 returned by remote Oracle - Dup Active Server

    Hi all

    I'm doing a duplicate RMAN of a 11.2.0.4 database to another host on a different IP address.

    Goal

    SQL> select * from v$version;

BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production

    Auxiliary (nomount)

    SQL> select * from v$version;

BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production

    I've added an entry static listener to the file on the server to THE listener and start the instance in nomount.

    (SID_LIST =
   (SID_DESC =
      (GLOBAL_DBNAME = IST_11G)
      (ORACLE_HOME = /devdb3/u01b/app/oracle/product/11.2.0.4)
      (SID_NAME = IST_11G)
    )

    TNSNAMES on the server to THE:

    points to the TARGET server:

    IST_11G_192 = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.48)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = IST_11G)(UR=A)))

    the server pointing to THE

    IST_11G = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.21.64.72)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = IST_11G)(UR=A)))

    TNSNAMES on the TARGET server:

    IST_11G_NEW = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.21.64.72)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = IST_11G)(UR=A)))

    instance pFile to THE:

    Using parameters in Server pfile /devdb3/u01b/app/oracle/product/11.2.0.4/dbs/initIST_11G.ora-side

    Parameters of the system with default values:

    db_name = "IST_11G".

    I have sftp file password above and named correctly.

    Check the connections

    --from target
$ sqlplus sys/xxx@IST_11G_NEW as sysdba

SQL*Plus: Release 11.2.0.4.0 Production on Tue Jun 30 08:32:10 2015

Copyright (c) 1982, 2013, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL>

    Since in THE

    $ sqlplus sys/xxx@IST_11G_192 as sysdba

    SQL * more: Release 11.2.0.4.0 Production on Mar 30 08:32:32 June 2015

    Copyright (c) 1982, 2013, Oracle.  All rights reserved.

    Connected to:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    SQL >

    So I checked that I have two means of connection, my at THE start and I can connect.

    Here's my RMAN command (Note: the TARGET servers and have the same host name, don't ask...) "This is why we use the IP address in the TNSNAMES):

    connection:

    rman target sys/xxx@IST_11G_192 auxiliary sys/xxx@IST_11G | tee /home/oracle/IST_11G_duplicate.log


    run
{
  duplicate target database to IST_11G from active database
  NOFILENAMECHECK
  spfile
  set DB_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G','/devdb3/u02/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G'
  set LOG_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G/','/devdb3/u03r/IST_11G_DEVDB3/'
  set control_files = '/devdb3/u03r/IST_11G_DEVDB3/controlfile/IST_11G_ctl1.ctl', '/devdb3/u04r/IST_11G_DEVDB3/controlfile/IST_11G_ctl2.ctl'
  set audit_file_dest = '/devdb3/u01b/app/oracle/product/11.2.0.4/rdbms/audit/'
  set diagnostic_dest = '/devdb3/u01b/app/oracle/'
  set log_archive_dest =  '/devdb3/u05f/fast_recovery/IST_11G/archivelogs/'
  set MEMORY_MAX_TARGET='1G'
  set MEMORY_TARGET='1G';
}


    $ rman target sys/xxx@IST_11G_192 auxiliary sys/xxx@IST_11G | tee /home/oracle/IST_11G_duplicate.log

Recovery Manager: Release 11.2.0.4.0 - Production on Tue Jun 30 08:37:02 2015

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: IST_11G (DBID=525645852)
connected to auxiliary database: IST_11G (not mounted)

RMAN> run
2> {
3>   duplicate target database to IST_11G from active database
  NOFILENAMECHECK
  spfile
4> 5> 6>   set DB_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G','/devdb3/u02/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G'
  set LOG_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G/','/devdb3/u03r/IST_11G_DEVDB3/'
  set control_files = '/devdb3/u03r/IST_11G_DEVDB3/controlfile/IST_11G_ctl1.ctl', '/devdb3/u04r/IST_11G_DEVDB3/controlfile/IST_11G_ctl2.ctl'
7>   set audit_file_dest = '/devdb3/u01b/app/oracle/product/11.2.0.4/rdbms/audit/'
8>   set diagnostic_dest = '/devdb3/u01b/app/oracle/'
  set log_archive_dest =  '/devdb3/u05f/fast_recovery/IST_11G/archivelogs/'
9>   set MEMORY_MAX_TARGET='1G'
  set MEMORY_TARGET='1G';
10> }
11>
12>

Starting Duplicate Db at Jun 30 2015 08:37:10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=216 device type=DISK

contents of Memory Script:
{
   backup as copy reuse
   targetfile  '/devdb3/oracle/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' auxiliary format
'/devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora'   ;
   sql clone "alter system set spfile= ''/devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora''";
}
executing Memory Script

Starting backup at Jun 30 2015 08:37:11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=365 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/30/2015 08:37:12
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/30/2015 08:37:12
ORA-17628: Oracle error 19505 returned by remote Oracle server

RMAN>

    I can't understand why I'm getting ORA-17628: error Oracle 19505 returned by remote Oracle server.

    So, I try one of the commands connecting memory se scripts to check if was not a problem with my execution block.

    backup copy reuse targetfile ' / devdb3/oracle/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' auxiliary format ' / devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora';

    $ rman target sys/sys_IST_11G@IST_11G_192 auxiliary sys/sys_IST_11G@IST_11G | tee /home/oracle/IST_11G_duplicate.log

Recovery Manager: Release 11.2.0.4.0 - Production on Tue Jun 30 08:41:00 2015

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: IST_11G (DBID=525645852)
connected to auxiliary database: IST_11G (not mounted)

RMAN> backup as copy reuse targetfile  '/devdb3/oracle/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' auxiliary format '/devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora';

Starting backup at Jun 30 2015 08:41:15
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=365 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/30/2015 08:41:17
ORA-17628: Oracle error 19505 returned by remote Oracle server

RMAN>

    Same mistake.  Nothing is written for the journal of alerts.  IM starting to pull the hair is left on my head out and people start screaming for this database.  I could go back to datapump but I want to understand this.  Any help would be very much appreciated.

    Thank you.

    Yes, although this:

    connected to target database: IST_11G (DBID = 525645852)

    connected to the auxiliary database: IST_11G (unassembled)

    can say you that RMAN you connected the two separate databases, the process, instances should do research each other using tnsnames file entries.  Thus, incorrect tnsnames entries can have one instance pointing to itself.

    Hemant K Collette

  • When I return from the page of google search for a link then button does not return return

    When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

    the problem was resolved after remooving extenshion «user agent overrider»

  • Satellite A30: System busy after returning from standby

    My abrupt A30 Satellite developed a problem when returning from standby mode. The system busy "Hourglass" is constantly and will not die. I have reploaded the power management utility since all options in 'Properties of power Option' are grayed out except for the "Power Meter" tab. It did make a difference.

    This problem appears at the beginning?
    Maybe the operating system has been installed there several times and now the registry entries are corrupted.
    This is why the system busy hourglass may appear.

    I m not 100% sure that this will help, but maybe you need to reinstall the whole OS
    On the new OS installed should all work a lot faster

  • SMU-4330 remote sense

    I'm trying to get the feeling of distance on the SMU-4330 to work. I have a sensor based bridge connected as shown in the manual. I can't find a property node for the remote sense. The remote sense works automatically when hooked or should it be set up?

    I thought about it.

    The 4330 do not correct the voltage at the bridge. They only correct the output of the sensor by the voltage sense lines back.

  • When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

    When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

    Hello
     
     
     
    1. how you try to install Service Pack 2?
    2. are you able to boot to the desktop?
     
     
    Method:
    Step 1: If you are able to start the computer in normal mode, then try a clean boot.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135
    Please note: after troubleshooting, start the computer in normal mode.

     
    Step 2: Try to install Service Pack 2 manually.
     
    How to obtain the latest Windows Vista service pack

     
     
    If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
     
     
     
     
    If you are unable to install Service pack 2, you can consult this article.
    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358
    Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.
     
     
     
     
     
     
     

  • Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

    Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

    Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

    Hello

     
    You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
    Put your boot system helps determine if third-party applications or startup items are causing the problem.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
    If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
    Reference:
     
     
     
     

  • Get updates windows default error configuration. returning from changes in Vista

    Hello

    I get this message "failed to Setup updates windows. returning from changes. do not turn off computer ' on my computer laptop compaq presario with windows vista.
    I have a problem it works and stop. Sometimes it is just on this slide. they gave me some recovery disks too. Help, please

    Thank you

    SK

    Hi henry ate,

    1. did you last changes made on your computer before the show?

    Follow the following troubleshooting methods:

    Method: 1

    Configure the computer to clean boot and check how it works.

    To configure the computer clean boot, follow the steps in the below link:

    How to perform a clean boot

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Method: 2

    Perform the troubleshooting steps form the following links.

    The problems with the installation of Vista updates

    You cannot install some programs or updates

    Method: 3

    Follow the form of measures, the following link to install windows updates in Windows Vista.

    Install the Windows Vista updates

  • Windows Vista: updates are not configured correctly, returning from changes

    my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

    So far there are problems or there are many who have this problem?

    Have you tried to disable temporarily running anti-virus software?

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058/#appliesTo

    Troubleshooting in Win 7 vs KB971058 for Vista
    http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

    The system update tool

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

  • How to return from Vista to XP Pro?

    How to return from Vista to XP Pro?

    If this is the case, contact the manufacturer of your computer:

    Can I downgrade my OEM version of Windows Vista business to Windows XP Professional?

    Yes. Right of demotion OEM desktop operating systems PC apply to Windows Vista business and Windows Vista Edition full, as stated in the terms of the license. Please note, downgrade versions OEM Windows Vista business and Windows Vista Ultimate are limited to Windows XP Professional (including Windows XP Edition Tablet PC and Windows XP x 64 edition). End users can use the following media for their downgrade: Volume Licensing media (provided that the end-user has a Volume License Agreement), trade retail (FPP) or System Builder hologram CD (provided that the software is acquired in accordance with the Microsoft OEM System Builder License). Use of degraded operating system is governed by the Windows Vista Business license terms, and the end user cannot use the downgrade and professional Windows Vista operating system. There is no right of demotion for Windows Vista Home Basic or Windows Vista Edition Home Premium.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Otherwise:

    Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

    If the XP drivers are not available for your model, forget the idea.

    If Yes, download and save to a CD or Flash drive.

    Then buy a disc XP and license.

    Save all your data because it will be lost during the installation of XP.

    Then follow the steps below to do a clean install.

    http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

    Once installed, reload ALL your other programs of original media, or download again.

    Reload all drivers and utilities for your motherboard.

    See you soon.

    Mick Murphy - Microsoft partner

  • c:\windows\system32\osk.exe, a referral was returned from the server

    My scren keyboard on does not: error when I try to use:c:\windows\system32\osk.exe, a referral was returned from the server

    Hi Kevin Urubek,

    1. what operating system do you use?
    2 is connected to the domain of the computer?

    Method 1
    If the steps above fail, I suggest to create a new user account and see if you get the same error message, the following link will allow to create new user account.

    Create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If everything works well in the new user account, then I suggest you to follow the article to transfer files and settings to the new user account.
    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Method 2
    If you're windows7, try the steps from the following link:
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • Default configuration of the windows features, returning from changes

    Failure configuring windows features, returning from changes

    What is the cause?

    Sorry, can't say. You must post a lot more detail.

Maybe you are looking for

  • How to remove SearchAnonymizeme from Google in Firefox

    The searchanonymize application installed and immediately judged unsatisfactory when searching with Google.Deleted everything which seemed to matter (registry entries, entries of startup files - prefetch, OCS file) - but the thing still in Google sea

  • ThinkPad 90W AC adapter ISSUE!

    I just got my laptop new T500, everything's fine except that the annoying noise of electric current comes from the adapter is unacceptable. I was wondering if I should call Lenovo and ask to replace another. I really could not tolerate the sound...

  • Screen stuck during the update

    Believe the computer was turned off during the installation of the updates. It is now stuck at ' Configuring updates 1 3-0% complete. Regardless of what I do, I can't get out of this screen. The circular icon that shows the activity/progress moves in

  • Unconditional network share Win7

    Hello My pc Windows 7 ultimate x 64 5 will share their D/e completely with the other player. Without any restrictions (full access, read/write/change) I don ' t want any PC ask username and password when accessing the shared drive. I know basically,

  • Photoshop CS3 not enabled because "activation maximum reached" new PC old buyed PC, not sold availabe to disable the activation of 2009

    I buyed a new complete PC now and have installed Photoshop CS3 which I used since 2009. Activation failed: "maximum number of activations reached '.I tried a lot of time to solve this problem through lines guidelines, but without results, so the old