Satellite A30: System busy after returning from standby

Similar Questions

• X120e bad DIMM location. System does not return from standby mode

  Hello. I have a X120e running Windows 8.1 Pro x 64.

  I just put the unit to 4 GB of ram (2 x 2) of 2 GB (1 x 2). Whenever the upper DIMM Slot is used, the system will not leave standby mode and all power, including the battery must be removed from the system so that it works normally again.

  Of interest, all the ram tested with Memtest86 +.

  If it's important the system has the e350 CPU and a 320 GB HARD drive.

  Let me know if you have any input.

  Thank you!

  Update: I've updated the BIOS from 1.16 to 1.17. The system now between and leave pending normally as it should, with the two occupied ram slots.

  Of interest, none of the BIOS settings changed after the update.

• XP Home BSOD after return from standby (Standby).

  Here is the data from the Minidump:
  

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\WINDOWS\Minidump\Mini010510-12.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  Built by: 2600.xpsp_sp3_gdr. 090804 1435
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
  The debugging session: 21:51:44.500 Mar 5 Jan 2010 (GMT-5)
  System Uptime: 0 days 0:02:15.234
  Loading the kernel symbols
  ...............................................................
  ...................................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck F4, {3, 8a 105524, 8060567e, 8a1053b0}

  Unable to get nt! KiCurrentEtwBufferOffset
  Unable to get nt! KiCurrentEtwBufferBase
  Probably caused by: hardware_disk (+ fc)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CRITICAL_OBJECT_TERMINATION (f4)
  A process or thread crucial to system operation has unexpectedly left or been
  terminated.
  Several processes and threads are necessary to the functioning of the
  System; When they are finished (for some reason any), the system may not
  function longer.
  Arguments:
  Arg1: 00000003, process
  Arg2: 8a1053b0, object of ends
  Arg3: 8A 105524, name of the process image file
  Arg4: 8060567e, explanatory message (ascii)

  Debugging information:
  ------------------

  Unable to get nt! KiCurrentEtwBufferOffset
  Unable to get nt! KiCurrentEtwBufferBase

  PROCESS_OBJECT: 8a1053b0

  Nom_image: hardware_disk

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAULTING_MODULE: 00000000

  Nom_processus: csrss.exe

  EXCEPTION_RECORD: b730f9d8-(.exr 0xffffffffb730f9d8)
  ExceptionAddress: 75b7b3b9
  ExceptionCode: c0000006 (in page i/o error)
  ExceptionFlags: 00000000
  NumberParameters: 3
  Parameter [0]: 00000000
  Parameter [1]: 75b7b3b9
  Parameter [2]: c000000e
  A paging operation is not to 75b7b3b9, because I/O error c000000e

  EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The required data were not placed in memory due to a State of error / "0 x % 08 lx.

  CUSTOMER_CRASH_COUNT: 12

  DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

  Error_code: (NTSTATUS) 0xc0000006 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The required data were not placed in memory due to a State of error / "0 x % 08 lx.

  EXCEPTION_PARAMETER1: 00000000

  EXCEPTION_PARAMETER2: 75b7b3b9

  EXCEPTION_PARAMETER3: c000000e

  IO_ERROR: (NTSTATUS) 0xc000000e - a device which does not exist was specified.

  EXCEPTION_STR: 0xc0000006_c000000e

  FAULTING_IP:
  + fc
  75b7b3b9?              ???

  BUGCHECK_STR: 0xF4_IOERR_C000000E

  FOLLOWUP_IP:
  + fc
  75b7b3b9?              ???

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: hardware_disk

  SYMBOL_NAME: + fc

  STACK_COMMAND: kb

  FAILURE_BUCKET_ID: 0xF4_IOERR_C000000E_ + cf

  BUCKET_ID: 0xF4_IOERR_C000000E_ + cf

  Follow-up: MachineOwner
  ---------

  I tried; disconnect all usb drives, updating the drivers of Intel 82801FB/FMB, update drivers from Nvidia 9800GT chipset, disable the write cache on the SATA drive, update the network drivers.

  System works perfectly otherwise. Its own BSOD during the return of the mode standby.

  I solved this problem just: my setup had 2 cd discs using the primary IDE channel and a Sata drive on the 2nd Sata channel.

  I bought the computer used and it was how it has been implemented (and it worked fine in this config without using sleep).

  It turns out that the HD (with the top OS) must be connected on the first channel of Sata (Sata (0) on my Dell) so he can wake up correctly the mode standby.
   
  I just disconnected the Sata round cable and moved to first, then changed the BIOS to reflect this change, and everything's fine.

• Gel after returning from standby

  Windows 7 64 bit

  I use a lot of waiting. After that I wake the computer from sleep mode, it works as expected; but sometimes, when I run a program (usually VLC), the PC freezes, more input not possible, hard power off required. This isn't a problem of input device. The power button on my computer should cause the PC to stop but does not either when the system is frozen.

  If I do start VLC (or another program that causes the gel), the PC would either freeze during shutdown (power off), or follow these steps if I started the day before: the rotation of the drives down, monitors are not getting a signal more, cooling fans and the CPU fan still spinning. After about 5 minutes the PC turns off hard.

  When I turn on the PC after a hard stop, the message "Windows is not stopped correctly. You want to try safe mode? »

  I composed the PC myself, so I have to identify the material originally from the problem... If it was caused by the material. I know that it's not caused by my hard drives of 2 TB. I know there is a similar problem, caused by the slow rotation of the 2 TB drives implementation. I tested my system will detect the connected disks and it still frozen. Disable all startup items has not solved the problem.

  Here is a list of my equipment:

  Mobo:
  980DE3/U3S3
  CPU:
  AMD FX 8320
  RAM:
  2x8GB crucial DDR3 of Sport
  Video card:
  ASUS Radeon R7260X, PCIE
  HARD DRIVE:

  Crucial MX100, SATA (SSD)

  various bis Magnetfestplatten 2 TB

  OPERATING SYSTEM:
  Windows 7 64 bit

  POWER SUPPLY:

  800W

  Yet another update:

  I recently installed Windows 7 new and frost have yet taken place. Only a few programs have been used:

  Chrome, Skype and VLC (since these seem to 'help' freezes)

  I also tried Ubuntu, where the system does not freeze. This could be because Ubuntu uses a different expectation.

  Currently I am in my old Win 7 installation and try different programs, not only not their use.

  Firefox instead of Chrome-> gel

  No VLC-> gel

  No Skype-> gel

  Thus, any of these programs makes my PC freeze

  ASRock (my mobo manufacturer) suspected hardware fault. Alas, I can't trace it either PSU or mobo.

  Install Windows 7 from scratch, I realized sleep (aka standby) is usable only if the video card drivers are installed. It may be that this device / driver is the culprit?

  Edit: it seems I found what caused the problem: Reader adobe flash (plugin). Since it is used by Chrome and firefox in watching Youtube, my system froze with the two programs. Since I updated the driver (including firefox only suggested) no more freezes have been held since a few days now. This may be premature if. I will present after a while to confirm.
  Meanwhile, I post a link to a thread that seems to focus on the same problem:
  http://www.TomsHardware.co.UK/Forum/67304-63-Flash-content-freezing-computer

• Satellite L falls down after returning from the mode "sleep."

  My laptop has this bug, whenever he goes to "sleep" when it "wake up" the system said that Explorer windows stopped working and almost everytime I have to restart with the power switch. I changed the operating system from Vista to windows 7, but he continues to act like that. Someone at - it a solution?

  Hello

  For me, it looks like a Windows operating system problem.
  Maybe you should try a CCLeaner which cleans up the registry and other files on the HARD drive.
  You should also try to defragment the HARD drive.
  If no improvement is noticeable and Explorer windows would keep crashing, then a new installation of operating system is necessary.

  Good luck

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite A30 921 stops after 10 minutes

  I am the owner of a Satellite A30 921, but it stops after 10 minutes.
  I tried to change the settings for toshiba power management, but they will not work any ideas?

  The laptop turns off automatically without display of error messages?
  This can be caused by an overheating problem!

  How old is your laptop and you clean the cooling fans in the past?
  If this isn't the case, I recommend you this doing.

  To clean the fans, you can use the jet of compressed air that can be bought in most computer stores.
  The problem is that dust and debris inside of the laptop prevents cooling modules works properly, and so the temperature increases to a higher level. This leads to the farm automatically from the bottom.

  In my opinion, fans of cleaning might help with this problem.
  Good bye

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite A30-213 - stops after loading Internet pages

  My satellite A30 213 stops almost everytime, when I enter a website with a lot of uploadings. The machine rotates in about a minute or two and closed its doors. I know that my RAM is only 256 KB. Is that why and in this case, what can I do about it?

  Best regards
  Janne

  Hello

  It is not easy to give a correct answer, but the fact is that 256 MB of RAM for using Windows XP Home edition is really not much. I do not know what A30 you have exactly, but some of them can be upgraded up to 2 GB of RAM.

  RAM modules are not more expensive and I recommend you to upgrade to 1 GB minimum. After this the laptop will have a lot more resources and will go much faster.

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Satellite A30 - system shutdown

  Hello

  My system is Satellite A30 - 614 P4 3.06 GHz/XP HE/512 MB / 60 GB/15TFT/DVD-R/RW/LAN. Sometimes it automatically. Base of the notebook becomes too warm. Please suggest me a solution.

  Please send me a message [email protected]

  Hello

  For me, it looks like overheating and not as a software problem!
  Usually, all Toshiba laptops support an overheating protection. This feature stops the laptop automatically to avoid material damage!

  I think that don t cooling modules work correctly and therefore the temperature rises to a higher level. Especially the dust blocks the cooling fans!

  So, in my opinion, you should try to clean the fans.
  Vacuuming can help! But be careful! The strong suction can damage the fan!

• Satellite A30 recovery stops after 15%

  Hello
  I have laptop satellite A30. When I tried to do a restore with the Toshiba Recovery CD, it started to format my hard drive I think. But when the progress bar reaches 15%, my computer shuts down. No mater how many times I ve tried I did the same thing. Now I'm stuck and can even get into Windows.
  Can someone help?

  Thank you!

  Hi Takis,

  The most likely cause of this behaviour is a bad hard drive. When the recovery process reached the defective area of the platters in the car he try again several times but then close the laptop.

  If you have access to all utility disk (such as Norton Disk Doctor) you could try a scan of your hard disk surface to check bad sectors.

  Kind regards

• BlackBerry smartphones impossible to update the applications after returning from deployment

  I really send an SOS to you all, but right now I need help.  I've just returned from a seven-month deployment and was not able to use my new 2 "BOLD" for the duration of my output.  I forgot my answer to the question on my security question and impossible to reset my password.  Who should I contact to get a discount to re-set for my account?

  Hi and welcome to the forums!

  If you are referring to the security password to unlock your device, you will not be able to recover it or changed it. You will have 10 attempts to open it and then our device will perform a security wipe.

  If you are referring to your selection of the site password BIS forgotten password. You will receive a PIN message with your password.

  If your device does not work, use the attached link to get all the necessary information and then call your operator.

  Thank you

  Bifocals

  KB10385 Several attempts to enter a password prompt a warning that data will be erased from the BlackBerry smartphone

  KB04665 NSE, MEID, ICCID, IMEI, IMSI, PIN and SIM

• Satellite A30 - no sound after installing the audio driver

  I've updated the audio driver on my laptop A30 today on the Toshiba site with download of Realtek Semiconductor Corporation, and now the sound does not work. It's my single stereo so I feel really bad. The original driver discs are stored and I'm not very techie so help please...

  Thanks a lot for your time, Phill

  Hi Phill,

  First of all, I would like to check the sound settings in the control panel to make sure that none of them are extinguished, and that "dumb" is not checked. Also check that the volume on the side of your A30 control is enough at full volume.

  In the case where everything is set correctly, I would then reload the driver Realtek of the utility CD and tools of Toshiba. If you do not have access to the CD then you can restore the driver to its original state by selecting the audio device in Device Manager"and roll back driver it.

  If all else fails you should be able to 'restore' your system from the last point before your installation of the new driver restore.

  HTH