Blank homescreen Q10 blackBerry on Q10 after OS 10.3.2.680 update the AT & T network

Similar Questions

• After CC 2.3.0.151 update, the synchronization process missing (no synchronization file, no Typekit) basic

  I'm a moderator since long time member and ACP forum on several forums. I have two Macs running Mac OS X 10.10.5. Two of them have been updated tonight to the latest version of cloud creative app, 2.3.0.151.

  On my MacBook Pro, the CC app works well. But on the iMac, there is no access to synchronization of file or Typekit. All I see is under fonts or files is the rotating blue icon.

  When I studied the CC app from this computer, I found the following:

  * In preferences, File Sync is clicked on, but the location of the folder is empty and gray out.

  * In preferences, Typekit is clicked, but grayed out and unselectable

  * When I use the activity monitor, I see that the process of "CoreSync" does not work (as it is on the other Mac, and when I saw before)

  When I came across this forum, I've seen opinions on the problems of CoreSync. I followed the instructions in this help file:

  Using creative cloud | Uninstall the creative cloud desktop application

  I uninstalled CC app and used the link to reinstall the version 2.3.0.151.

  But nothing has changed.

  What should I do next?

  Thank you, Ben. I have creative cloud support online help. It was a permissions problem with the process CoreSync (affecting File Sync and Typekit). Now fixed!

• Loss of Q10 of blackBerry battery life after updating OS level and unrecoverable system error now

  I have updated the OS on my Q10 about 2 weeks after a prompt on the phone. Since then, the battery drains within 3 hours, even on airplane mode. I was not really able to use the phone at all if it is connected, the battery will be part of fear in an emergency. The battery gets hot while the phone is turned on, and the browser is very very slow.

  I tried switching batteries - no change.

  I searched several forum posts here and on crackberry and saw the recommendations of reset to factory and reloading. Link to BB says I must have a software update (on my desktop) to reset my phone, but 12 tries to download the update result just in an error message.

  When told to turn off the phone, she returned with error message: bberror.com/bb10-0015 - unrecoverable system error?

  BB.com says download software - try a message via this page instead of the link BB - same error on the office.

  My Q10 are already dead for good, or is there still something I can do?

  Afraid to replace it with a new BB, because each new model has a shorter and shorter life span, and I fear the next round will not last a month.

  with this error message:

  First of all, have you read the instructions on http://us.blackberry.com/support/error-codes/os10/error-bb10-0015.html?CPID=VAN-ERRBB10-0015

  If this is not successful, you will need to use a charger automatic file to connect and reload the operating system.

  Updated peripheral OS10 using the ADF

• Applications for blackBerry Smartphones does not open on Blackberry Bold 9780 after download of Blackberry App World

  My applications are not open on Blackberry Bold 9780 after their download of Blackberry App World.  They complete the download, they are free applications.  When I press the button to open the application, it does absolutely NOTHING.  I don't know what else to do, so I have remove off the 9780.  Please help me! -Jennifer

  I guess what I'm confused about this... is if we are going to solve all the apps that does not open, and now you have removed people... How shall we proceed?

  Who is?

  Let me to this Counsellor... Once you have downloaded an app from AppWorld, even if you are not invited to do, once the app is installed, make a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.

• Smartphones to blackBerry after the Application update the only language chosen is English

  Hello

  I just bought a Bold 9700 today.

  After installing the Desktop Manager (Mac) and hang the Blackberry to my Mac, I went to the Applications tab and installed a few additional applications. After the restarted blackberry the menu language is set to English (instead of German, like it was before), so I went into options to return to the German, but the only option is English.

  Did someone knows how can I get German as a language?

  Matt

  The problem ist that I don't have a PC, one a Mac, so updating the firmware etc does not work for me.

  I actually had a Trial Version of Parallels + Windows lying around, installed that, installed Windows Desktop Manager and then just reinstall Applications, now I can use the German language again. I still have no idea why, if I use the Mac Desktop Manager, it removes the German language files and even though I have check boxes to install them, it is not actually install them. I guess I'll just try not to use the Application Setup and everything will be fine... It all sounds pretty weird, but I can't find another solution.

  Thanks for your help guys if!

• After importation, all 'frames' are present, but the picture is blank (gray).

  After importation, all 'frames' are present, but the picture is blank (gray). When I tried to edit in Photoshop CC, it opens correctly. Tried to delete CC with cleaning tool. Re-installed with the same question. Repeated twice with the same consistent result.

  Photos opening are exported during the migration process and opens in Preview/Photoshop. Tried with a variety of photos with the same result as well.

  

  MacOS X 10.11 (iMac end of 2014)

  CC 2015 Lightroom and Photoshop CC 2015.

  Hi clementl55784534,

  Suggest you follow the steps below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

• BlackBerry 10 functions and features can not turn off my Blackberry Protect z10 after changing the password ID.

  My wife's phone was last updated the operating system more recent 10.3.2. I then tried to access a service and found when he asked for the Blackberry ID, we had forgotten the issue of password and user. Then I deleted the ID and set up a new. I can connect to the new identification, but he cannot confirm on the z10. Then I thought to wipe the z10 back to factory setting. However; the z10 shows that BB Protect is enabled and we cannot turn it off using the passwords that we try.

  I have logged on to the site of BB Protect and found there is no device associated with this Userid. Also, I find the screen for the current user ID name using our existing email address differs from the one showing on the screen z10 Blackberry ID. name I tried to change the screen name and password on the ID to be similar to the z10 site but it will not accept it.

  So now I'm unable to wipe the z10, or change the ID info to make it usable when required. I also noticed, online, there are instructions for the new OS 10.3.2 informing us that no wiping ability to Protect is disabled. There is no instructions on how to so that when a problem arises like mine.

  Help, please.

  I searched for a solution and I finally found one that works. It was posted by asokhay about a week ago and is as follows:

  "I found the solution!

  I connected my passport for Blackberry link and clicked on "back up and restore" in the left navigation tab. Then I clicked on Factory Reset. He asked me to unplug the unit and when I did the wipe of security has started to happen. "

  This works, however when I wipe the phone it took about 30 minutes. By reading this forum I found that some wipes can take several hours to complete depending on the amount of material is on the cell phone.  As I could not ' t register anything before this wipe I have to start over from the beginning. " Fortunately my wife added very little to the phone, such as applications or photos.

• BlackBerry Z10 can't open my Z10 BB after updating the software via wireless internet

  Please I need your support on my BB Z10 it stops working after that I updated the software of the world of BB and it stuck at 100% (finalize the configuration of the device), I did everything what I removed the battery and put it on again, I pushed the button reboot, I pushed on the volume buttons and the same result as I tried to get the new link BB software but the laptop can not read my BB and also my BB link, please see the photo below for more support and please give me support on this issue as soon as POSSIBLE.

  Hello and welcome to the community!

  Given what you describe, I recommend the very vigorous autoloader method to install an OS on your BB device. Something has gone wrong with the automatic method you used, and something more energetic (though not official) is required.

  Good luck and let us know!

• Keeper password blackBerry Smartphones missing after upgrade to version 6.0 bundle 3049

  Hello

  .

  I had a problem with my BB Torch, in which the camera starts up.  On the advice of the support of the people, I was able to start it in safe mode.  However, he lacked the App World - and so I couldn't update any application, or install a new one.

  .

  I took a backup and updated the software for the device and restored all the data.  Now, the App World is here, but the password keeper is missing.

  .

  According to the other instructions in the forum, I tried to restore it in the Desktop Manager, but it does not show such an option for password keeper.  Please help - I need to use the password keeper.

  .

  THX!

  Install both, this order please:

  1. First install the desktop software, but do not run it yet (it could offer at the end of installation)
  2. Then install the downloaded BB OS package of Bell (which kind of changes the Desktop software to make it specific to your BB)
  3. Now run the Desktop software and connect your BB to the USB cable when prompted. If she does not invite (he cannot, depending on certain factors), then just connect at any time after the Software Desktop is running.
  4. Now, open the Applications section of the Desktop software and, if all goes well, the first elements will be as I mentioned and password keeper will now be in the list, you can install

  Good luck!

• 'Delete' in the music blackBerry smartphones went after the 7.1 update os

  I have curve blackberry 9360 a few weeks ago, I've just updated OTA... I didn't notice new features but a few days ago, I was about to delete a music file (which was I copied from my computer and downloaded from free file-sharing sites) of my music player and tada , there is no way to remove them from my music library... I tried to use the file manager, but delete also went there, tried to press the "Del" key, but no luck... I am able to delete the pictures and videos, but only music is not, why is this?

  Oh, I had...

  I can't remove it through my camera because the folder "music" (which is automatically created by my phone) has read-only attributes... I tried to change it in my pc by unchecking the read-only properties option, but my phone continues to set this folder read only... and so what I did is I create another folder named "music files" and put all my MP3s, so I can now remove from the file manager and music player...

• Zone blackBerry Smartphones changed after connects to pc with the bb Desktop Manager

  Hello. Everyone. My bb torch is still change zone eniwitok-12 in area of Beijing while that connects with the pc using the bb Desktop Manager. How it can be fixed? Anyone know this questions.

  Yes, in the BlackBerry Desktop Software, there is an option to ' day of the date and time of the device ' on connection.

  Disable that.

• Applications for blackBerry Smartphones reappear after wipe

  Hello world

  A little while ago, I wiped my "BOLD" and more to get rid of clutter that can be hung in the background.
  I noticed that the charger tilts an English Dictionary / Chinese from a company called Microhill as being installed.
  I had tried a few products like this before, but how would he got back on the phone? I certainly have not reinstalled one of them since I wiped it.
  Is this part of the standard phone software, perhaps something to do with the different input languages

  Thank you

  Paul

  I found that making your way is not always delete all applications 3rd party for any reason any! The operating system clean install works fine using Desktop Manager.

  You can try deleting the app Options > Advanced Options > Applications, select the application, press the menu/blackberry and 'delete '. Databases have nothing to do with the apps, so it shouldn't affect the installation or remove the application. You can also add/remove a program with Desktop Manager: http://www.blackberry.com/btsc/KB15172

• You have problems with internet tethering using your Blackberry Desktop Software after upgrade to Windows 8?

  Here's the email I sent today to Microsoft. Do you have the same problem? How is - it you haven't solved the problem? Do we not have a work around? Thank you very much!

  Hello

  
  

  Recently, I met this problem since I upgraded my PC from Windows 7 to Windows 8 by shopping online. I can't do internet tethering with my Blackberry 9360 more. I am using Blackberry Desktop Software 7.1.0.32. Here is the error message I get when I click on "Mobile Internet" in the office of the said application

  
  

  
  

  COULD NOT START INTERNET MOBILE

  Failed to initialize of the Mobile Internet.

  
  

  Please check your profile settings and make sure that your radio is turned on. This service could also have been turned off by your mobile service provider or administrator.

  
  

  
  

  Already, I have ensured setting/phone/internet is correct and that the radio is on. In addition, internet endearing is supported by my Smart unlimited BIS Plan.

  
  

  So my friend visited our place and I noticed that he uses his Blackberry 9320 with Globe unlimited BIS Plan for internet tethering in his laptop. It works perfectly fine. And so I used their BB device on our PC and I got the same error as posted above. I then connected his 9320 BB to his laptop (with same Blackberry Desktop Software installed) and it started to work again very well. So, I also tried my BB 9360 on his laptop computer and internet endearing worked!

  
  

  What I've been through, I guess that the problem is not related to the BB Desktop Software I use plan or service that I currently have with my carrier. Obviously, the problem is due to a problem of incompatibility somehow.

  
  

  How to solve this problem? It is important for me to use internet service my phone sometimes because often our connection with Smart Bro is much too slow.

  
  

  I hope I get a response as soon as possible time. Thanks and good luck.

  Hello

  BlackBerry (BB) 9320 and 9360 are compatible with the Windows 8 operating system.

  You can consult the following Microsoft article.

  Compatibility Windows 8 Center:

  BlackBerry 9320: http://www.microsoft.com/en-in/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-in&TextSearch=blackberry%2B9320&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  BlackBerry 9360: http://www.microsoft.com/en-in/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-in&TextSearch=blackberry%2B9360%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I recommend you to install the software of BB from BB site and check if it helps.

  Download driver blackBerry: http://in.blackberry.com/software/desktop.html?LID=in:bb:software:desktopsoftware & CAL = to: bb:software

  Note: If the problem persists, I recommend you post the same question on BlackBerry forums and check if it helps.

  Communities of blackBerry: http://in.blackberry.com/communities.html

  Keep us informed on the status of the issue.

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• Windows 7 installation recognize SSD or HDD after (rate?) Update the BIOS

  Brief statement of the problem

  After a failed BIOS update (computer is turned off during the update), the computer would not start, indicating that it could not find an operating system.  I tried to reinstall Windows 7, but the installer does not recognize one of my hard drives or SSD internal here which was installed Win7 and my boot drive is - that it recognizes my external my book Duo (backup) but that doesn't help me.  The SSD and two internal hard drives still appear in CMOS and Partition Wizard, however.  How can I get the installation of Windows to recognize my hard drive, so I can repair or reinstall Windows?

  Note: I borrowed pieces of this post that I found on line since December 2015 since the circumstances mirror mine near each other.  In this case, the answer that seemed to work for the poster should go to Dell support, download the latest SATA RAID drivers and put them on a USB stick, then load them in when requested by the Windows Installer.  I tried to do this, but, assuming I have the right drivers, nothing appears in the same installation of Windows area after loading in the drivers the most recent that I found and put on USB from Dell.

  Specifications of the computer

  Desktop computer Alienware Aurora R4, at Alienware March 2013 purchased
  CPU: Intel Core i7 - 3820K @ 3.6 GHz
  RAM: 16GB Quad Channel DDR3
  Hard drive: 2562 GB SSD (SAMSUNG ATA SSD PM83 SCSI Disk Device)
  Secondary (storage) hard: 2 TB internal installed at the factory (Western Digital)

  Tertiary HD: 1 TB (I installed myself, since I had an extra, Setup has worked well for years)
  GPU: NVIDIA GeForce GTX 660
  OS: Windows 7 64-bit (not sure if Premium version?) family

  Readers are not in a RAID configuration.

  History of troubleshooting

  After nearly three years of use without problem, my fans were really loudly all the time - even at rest and I rarely do anything intensive CPU/GPU.  According to the information found online, I downloaded and installed the latest version of controls thermal/Alienware Command Center.  Who has not solved the problem of fan and makes thermal controls were not give readings that the more - basically said that the pump of the CPU had failed and that all shows as 0 degrees Celsius.  The information provided by the support forums, I decided to upgrade the BIOS (from v.7 to v.11) using updater downloaded from the Dell support site [perhaps a bad idea, in hindsight, I must admit, but same manual fan controls were not helping the issue].

  As the PC has been reset during the update of the BIOS, the computer fans started running at a very high speed - much more quickly that I had never heard before.  I was afraid that my computer was damaged, but I let go still for a long time.  After about 5 minutes, I foolishly forced a shutdown of the computer.  [Yes, I know, it was really, really stupid - well based on the fact that my computer does not boot up to BIOS and from what I've seen elsewhere online it seems the BIOS update went through, although with messed up settings.]

  After that, the computer would not start.  The error message indicates missing BOOTMGR.  I downloaded partitionwizard on the idea that it was a problem of partition/MBR and, of course, both my SSD (marked as "boot + active") and a secondary drive have been marked active. I did the second disc "inactive".  Assistant Creation of partition also shows not all of my readers, including their scores, correctly.

  In troubleshooting, I had also used my Alienware installation disc and tried to repair or reinstall Windows.  In all cases, the Win7 installation/repair program found no any operating system or hard drives. When I went to the prompt from the installation disk and tried DISKPART "list disk" or BOOTFIX. EXE, they only listed my MyBook external Duet (which I disconnected since then and now no discs see)-I've never seen the internal boot SSD or either of the other internal readers everything in Windows 7 install the program. Using various BOOTFIX. EXE options such as /fixmbr and /scanos help not - they complete "correctly" really quickly without effect or tell me that there is no OS.

  Now when I try to load up, I don't you the message BOOTMGR but rather get a topic that there is no current boot device and how I should insert the bootable media.

  I then tried to reuse the Alienware Windows 7 disc to reinstall Windows 7, but the installation program could not even find a hard drive.

  I also tried to install Windows on a USB bootable, but had the same result.

  Can I enter the CMOS configuration very well.  I can make and save changes to it very well.  It seems normal, and it correctly lists all three internal hard drives.  POST also correctly lists all of my hard drives.

  I saw the reference to change its RAID settings in the CMOS Setup, but my only two options are RAID or ACHE and none who changes the situation.

  I'd be fine with Windows 7 reinstallation on the SSD drive (would rather not do that, ideally, but it's just a disc of starting with some Steam games on it so easy enough to recreate). I don't have my documents among other internal readers backed up but I have not seen anything that makes me think that these readers have been affected, just that I have to get the recognized internal disks somehow.  As simple as somehow becomes the right drivers loaded in, and if so, how do I do that (previously, I downloaded all three files that lists by Dell under "storage device" and "drivers" option of the Setup disk to load on the support page and unzipped on a USB and used in, but that does not in the operating system appears so installation/repair access)?  Or am I missing some other step?

  Please let me know if screenshots or more information would be helpful - happy to give them once I am home and back in front of this computer.

  Thanks in advance!

  The value of the BIOS:
   
  SATA Mode = AHCI Mode
  = UEFI boot mode

  Win7-DVD, Win-8-DVD, or a Win-10 USB flash drive should start now. Use the one-time-starting F12 menu.
   
  For Win - 8 or install Win - 10, if the SecureBoot option is available, it probably should be activated.

  Connect only the Boot C: drive for now.

  Install only on a blank disc (no existing partitions, OEM, or other).

  And if the UEFI Mode does not work, you can always try to MBR (Legacy BIOS).

  If the SSD is detected in the BIOS, it is a good sign. However, if it continues to not work anywhere, you need to plug into a USB tester or external USB enclosure and connect the computer to work... to test for signs of life.