Blob file extraction and storage in the file system

Similar Questions

• Extract and save all the channels of the PXI-5105 with 4 M of edge detection... Help!

  Dear collegaues!

  Please help me to improve my request, exhibit attached and sorry for my English.

  So my task is to extract and save all the channels (eight) of the PXI-5105 with 4 M of detection of peaks and sample rate 4 M with loop 1 sec...

  Entered all my channels are wiring detectors NaI with 0, 5... 1 microsec pulse (really) width and 0 kHz at not more than 40 kHz freq.

  Why I chose the registration of 4 M and the sampling frequency of 4 M namely? Answer is that I tested previously PXI-5105 40 kHz generator and pulse width 0.5 microsec. It works great and detection of peaks indicate 40000 pulses/s for me. If I set lower than 4M record and sample rate of 4 M, it is without work. In my honest opinion record 4 M and the frequency of sampling of 4 M are parameters very min.

  In the detection of peaks time present only 6 working channels... When I connected to diagram more 6 "detector.vi peak" - I see the error "...". out of memory... ».

  Advise me please, what needs to be done to it, it's all working well.

  
  

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• How transport costs, when making a purchase online? And what is the best system to use? ECWID, ShopLocket, Sellfy, or Paypal only

  Je want to do my first online shopping with posters. But I don't have not know how to do with cargo? Is it something PayPal do for you, or what I need to find myself? But I do not know how?
  And what is the best system use? Ecwid, ShopLocket, Sellfy or only Paypal?

  Thanks a lot for helping me :-)
  

  I suggest you check with delivery providers to do so, many providers of shipping like Fedex, usps, universal includes their own defined transport options.

  Parameters of the product can be configured with any ecommerce tool you use and then integrated with shipping providers.

  Thank you

  Sanjit

• HP ProBook 470 G3: upgrade memory and storage in the HP ProBook 470 G3 17.3 "

  Hello

  I would like to buy HP ProBook 470 G3 17.3 "after reading the review of this laptop in Notebookcheck.net site,

  The laptop has a large 17.3 display, I think in ZBook but is too expensive so I need Quadro GPU or CPU high range this ProBook G3 17.3 "is the best choice as I thought... by the way

  My question on the model with the product number: T6D90UT

  CPU: Intel® Core™ i7-6500U with Intel HD Graphics 520 (2.5 GHz, up to 3.1 GHz with Intel Turbo Boost Technology, 4 MB cache, 2 hearts)

  RAM: 8 GB of SDRAM DDR3-1600 (1 x 8 GB)

  Internal drive: 1 TB 5400 RPM SATA

  Display: 17.3 '' diagonal backlit flat antireflection FHD LED (1920 x 1080)

  GPU: AMD Radeon R7 M340 - 2048 MB, Core: 1021 MHz, memory: 1000 MHz, DDR3, 64 bit interface

  Website of notebookcheck and HP site says the laptop has DDR3-1600

  http://www.notebookcheck.NET/HP-ProBook-470-G3-core-I7-6500U-Radeon-R7-M340-notebook-review.155142.0...

  http://store.HP.com/us/en/PDP/laptops/HP-ProBook-470-G3-notebook-PC-%28energy-star%29-t6d90ut-ABA#SP...

  While the HP parts store said that the portable DDR3L?

  Memory module 8 GB 1600 MHz, DIMM DDR3L PC3L-12800 (SHARED)

  Reference number: 693374-001

  Visit this link please

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=709EC0F980AD4FC3A887C0C5C3DB5C46&SearchIn=P...

  It's great so far but what make me confuse is the price of RAM, there are two parties with the same name, the two net price is $209.00 (it's too expensive there technical error or what)

  I can buy 16G. B (8 x 2) Kit from Newegg in the 57 to 100 such as price range below

  CORSAIR Vengeance Performance 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) laptop computer memo...

  Priced at $ 69.99

  Case latency: 9

  Time: 9-9-9-24

  Voltage: 1.35v

  Multi-channel Kit: Dual Channel Kit

  Model #: CMSX16GX3M2B1600C9

  Item #: N82E16820233587

  But I say that if I could, but the same part in HP it will be better for the stability and the use of long date because the series HP's ProBook made with too many test and the part use inside, he is selected to make the laptop to run higher stability.

  If the price is right and it's expensive so can I but the corsair with latency case kit Timing: 9-9-9-24 and tension: 1.35v, is also the RAM inside the laptop DDR3L with voltage: 1.35v

  Another question if I want to use the SSD for the system slot m2 inside the laptop only used there not I think to buy

  SSD Samsung 950 PRO - Series 256 GB PCIe NVMe - M.2 SSD internal 2 inches MZ-V5P256BW

  and as a primary partition for the windows system and the 1 TB drive will be secondary disk for my files is that fine or the laptop works with some LAGS and slow.

  Here is the Service Manual:

  Manual

  It has doors on the bottom so is very easy to upgrade. It takes DDR3L-1600 low voltage (1.35) up to 2 x 8 modules for total 16 concerts. It is the specified memory:

  8 GB (PC3L-12800 1600 MHz, DDR3L) 670034-001

  It has a slot of the WSSD m2 using modules with this form factor:

  

  If you need assistance more let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Help, please! A master hard disk partition information lost and cannot start the Vista system

  I have Vista with my dell desktop computer.  I guess I got a virus that has deleted/messed my main hard drive.  All of sudden my computer was dead and when I try to restart, I found I can't boot the system.  I loaded the DVD for the resettlement of Dell to come with the computer and try to install it.  But it shows "Disk 0 unallocated space" with 222 GB and 'Disk 0 Partition 2 Recovery' with 10 GB.  I could not install Vista on the first, as it says "Windows must be installed on a partition formatted in NTFS.

  How could I solve this problem?  I could not allow me to format the drive because there a lot of data, that I just can't lose.

  Any help is very welcome!

  Marco

  http://support.Dell.com/

  Problem with the recovery process, contact Dell at the link above.

  It's recovery process from Dell, NOT Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon...

  Mick Murphy - Microsoft partner

• Need bios and firmware for the HP system

  I have an older HP Pavilion Elite e9280t - product # AW020AV-ABA.

  It runs an Intel Core i7 CPU 920 @ 2.67 GHz, with a map of TRUCKLEE 1.04E01 system.

  System BIOS is 5.24

  Given that HP is no longer support these older systems, does anyone know where I might be able to locate the last good firmware and updated the BIOS.

  Thanks in advance.

  @fridaythemovie

  Card BIOS update mother IPMTB-TK improves support for Intel Core i7-980 X Extreme Edition processors system and solves the problem with the suspension system when you enter in the mode 'sleep'. "Version 5.29.

  http://ftp.HP.com/pub/softlib/software12/COL35997/PV-88834-1/sp49903.exe

  Your other drivers here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-elite-E9000-desktop-PC-series/3999455/model/4066664

  REO

• How can I put in a new hard drive to replace the main HD that crashed and that contains the operating system

  My HD C: broke down and needs to be replaced.  It contained the operating system (XP).  My other drive is OK.  I have all the original cdroms, including the operating system.
  I need to know if I should be careful what it is.

  Hello Nigel

  Each hard drive is different with their adjustment as far as riders go unless you have purchased the same exact model. Make sure that you set the jumpers on the correct setting for the new hard drive with the manual that came with the hard drive. You can also reconnect the cables of data and power supply for the reader who does not appear because they can be loosened.

• Wiping clear and reinstallation of the operating system/software

  Hello

  Background

  I have a laptop and desktop PC - both running Windows XP Home (version 2002).  I haven't used the old office for about 2 years (that I bought a new desktop computer with Windows Vista) - but I still use the laptop.

  The laptop works ok but often is very slow and freezes, lose its connection wireless internet in the process.

  Re my old desktop PC (Intel, Pentium IV processor)

  As mentioned above, I haven't used it for a few years but I plan to give my father to use.  Before that, I would like to clean your PC of all content, and then install the latest software for him either Vista or even Windows 7.  I understand that it is possible, but would appreciate some advice/guidance on this operation.   I also want to know if the PC is able to run the latest software?  If not, how can I clean cleaned inside and reinstalled the XP software?

  The laptop re
  
  I intend to continue to use my laptop, but because of its slow/freezing problems, I would like to do the same thing as above... clean and reinstall the latest software.

  The goal is to have the old PC and current laptop, redesigned as if they were new!

  If it is not possible to install systems operation/latest software on these machines, so I just want to clear their contents, so that I can sell to buy the latest products.

  Tips, advice and suggestions would be welcome.   My apologies if I have posted this question in the wrong forum... If I should repost the question elsewhere so any guidance most welcome!

  Thank you very much

  As to whether the laptop or desktop can run everything except XP, you have to go the computer mftr. Web sites and see if there are drivers for Vista or Win7. If it does not exist or the computer mftr. States that XP is supported on the machine, just use XP. You also need to know if your computers meet the requirements of system for Vista/Win7.

  http://www.microsoft.com/windows/windows-vista/get/system-requirements.aspx - Vista system requirements
  http://windows.microsoft.com/systemrequirements - Windows 7 system requirements

  How to install Windows Vista - covers the upgrade and clean install - http://support.microsoft.com/kb/918884

  Choice of installation for consumer versions of Windows Vista (32-bit only) - http://support.microsoft.com/kb/932616
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  Complete guide to Lifehacker for Windows 7 - http://lifehacker.com/5386953/lifehackers-complete-guide-to-windows-7
  Windows 7: which concerns you? - http://windows.microsoft.com/en-US/windows7/products/compare-editions

  For the laptop, it will be easier to restore the factory (XP) using any method/media has been provided by the computer laptop mftr. See the manual of the mobile or site tech support of the computer laptop mftr. to find out how to do this on your laptop make/model specific. MS - MVP - Elephant Boy computers - don't panic!

• Short property Type and Date of the reading system

  
  Hi friends,

  We have a requriement for loading data in short which is of type 'Date' and we should be able to sort by date as well.

  Also, we have an obligation to create a property by reading the date system.

  Please indicate what changes are needed?

  We have the data in the format 12/11/2013, I tried to create a property by its name "Date" and "Datetime" type and it mapped to the source data, but it does not appear in app REF.

  If we change the data format(11/12/2013) above source to a different format? If so, what changes are needed?

  Also, for the 2nd condition, I guess we can add a manipulaotr, but please inform on why the property is not displayed in Ref app?

  Please note that we donot use latitude.

  Kind regards

  Shreyas

  Take a look in the fundamental development Guide, there is a specific format for the Date and time properties they need to conform to the.

  A simpler approach is to reformat YYYYMMDD (so 20131211) either a manipulator XML or in your code retrieves data, set the property as Type = digital and then sort by there.

  Michael

• installation of 10g and 11g on the same system?

  I have Windows XP and you have installed the database 10g. Can I install 11g on the same system and I need to use one of the database?
  
  Thanks in advance.

  As long as you succeed ORACLE_HOME correctly to work on your different databases, having more than one version of Oracle on a server is not a problem.

  Nicolas.

• import and storage of the LR4 develop presets

  I use iMac 27 ", 16 GB of ram and lion mountain, as well as LR4.2

  I recently started using develop presets, being lazy has creeped out just up on me. I have 15 or 20 presets showing in my preset Panel. Most are old.

  I find that the app; ication/support/adobe/lightroom, I have two folders. Called "develop presets" and the other called "user presets".  both contain folders of presets. some seem to be duplicates. total 2 records contain about twice as much as in built-in panels. many do not appear in my preset to develop Panel.

  It should be? can I create subfolders under the USER PRESETS in the develop presets panels and move them to there?

  It's already sounding more complicated than expected. I read help online again.

  Thanks for your suggestions in this area.

  Vince
  

  N °

  Subfolders created under Presets user appear as folders on the same level as the user settings in the Panel of Lightroom Preset. You can create several predefined folders not inside user Presets user level.

• Why the books are grouped and preinstalled with the operating system?

  It's complaints

  My Portege has Windwosw Vista. I didn't want to buy Vista, but they were only selling with him and no other choice was possible to purchase.

  First of all, my laptop had problems to install Windows updates. I could not connect my institution's Internet System. I had to reinstall the system again.
  It's a waste of time!

  After re-installation of the button for the sound on the outside Panel does not work correctly.

  Also, when I try to stop the laptop sometimes it restarts itself - he doesn't stop!

  Secondly, I had a problem with the laptop, when an opportunity to visit a well-known site, it serves to block itself.
  Once, when he is blocked, I had to restart and its screen remained black. They took for repair. It was delivered later - repaired, but with a defect on the screen!
  What a... workers!

  When I bought this laptop he had an offer with the update of Vista with Windows 7 after their release.
  Wonderful. But just note, Toshiba has the highest price of the offer, compared to its competitors - 30 (or £) against 15 for others, which of course I'm not going to pay.

  I already paid for Vista, which is incredible, and I knew, but I had not choice not to buy!

  All right, so there is still competition in the market, several possibilities are present - install Windows cracked, switch to Linux or just buy an Apple!

  Please, take this comment seriously! And please, stop with group buying, no matter what the benefit is. It won't work for long.

  Hi mate

  Fact is that most of the laptop manufacturers sell the computer and laptop computer with a preinstalled operating system. So I wouldn't blame Toshiba or other brands for which

  You get a new computer/laptop with a new OS.
  During the past 20 years, Microsoft released 3.0 Win, Win 95, Win 98, Win NT, W2k, Win XP, Win ME, Vista and Win 7, I remember that all my computers or laptops were grouped with these operating systems

  Toshiba offers the notebook with a clean image and you can also create a recovery disk (so don t need to buy anything if you need t n)
  Of course, each of us can install a clean OS, but there are a lot of people who are happy with such image pre-installed because everything is pre-installed and configured.

  Many people have no knowledge of computer wide and are really recognizing that everything is pre-installed and the configuration does not have a lot of time

  With regard to the question of the laptop;
  What to say; you had a bad luck that something was wrong with the laptop. This can still happen that my new LCD TV other manufacturer, was dead after two weeks, I called ASP, then replaced the screen now is ok

• Hard disk failure and recovery of the operating system

  I have a model p6310f desktop that had a hard drive failure.  I bought an SSD and install.  I looked for a recovery disk; However, I have not found one.  I was told that the recovery disc is on the hard drive in a separate partition.  Is this really the case?  If so, how can I access the recovery if the hard drive is still not recognized?

  Thank you

  John

  Cobb County, GA

  Recovery media is available on your Support page. Scroll the list of the drivers/software to see the possibility of ordering.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4107914

  Be aware that recovery discs do not always work on an SSD - if the capacity is much smaller than the original hard drive and SSD size wasn't an option initially offered on your model. You could make your own Windows 7 installation dvd in this case, as long as you have the intact lable on cases with license key. Let me know if you want to try this option.