blocked server and then weird spike in chart

Similar Questions

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• Open a local copy or move on the server, and then disconnect while the task is running until the end

  RNOS6 running on RNDU600 +.

  Looking to start a local copy or move of the large collection of files on the server, and then disconnect the PC while the task is running until the end. For example, to move a branch of several hundreds of GB of small files from one share to another, or copy them to a share.

  Seems to make my PC (in wireless) is inefficient as each file seems to have sent to the PC first, then return to the NAS.

  Is there a way of ordering on the NAS, so that it can continue the operation even if the PC is disconnected?

  Have you tried to make using the web administration page?

• Are there problems in the creation of a virtual machine in VMware Workstation or Server and then move it to ESXi?

  Hello

  I intend to pass our mailserver's current installation of Windows Server 2003 running on native hardware in a Windows Server 2008 running in a virtual machine on ESXi.

  This is the same machine as we will reuse so I would prefer to be able to create the virtual machine on a different computer and test it before wiping Windows and install ESXi. Are there problems with the creation of the virtual machine in VMware Server and then migrate to ESXi using VMware Converter? I won't if the result is not a 'perfect' virtual machine that performs as well as if it had been created on ESXi from the beginning.

  All our other VMs were created on ESXi from the beginning.

  Kind regards

  René Frej Nielsen

  If you are not sure, you can load VMware Server 2 and then install ESXi in it and test your configuration.  Do all this from your desktop (as it is decent).  You can also do in my computer.  A quick google search should give you all the information you need to get something like this configuration.

• Dreamweaver really slow when it is connected to the server and then hangs?

  I traced my server site as a network drive and when I add as a site in Dreamweaver, it is REALLY slow and it was only in code view, split and design views are basically usable UN - it will also crash when I try to save a file.

  Any help is massively appreciated - thank you,

  James

  Hello

  I know that some people do not have this, but it is not recommended.

  Everything depends on the latency of the network and "dead time", if the latency is too high, (perhaps by your page referencing external scripts (e.g. jQuery) then this can make the latency problem a very visible thing and slow Dw.) This is because your server has 'get' the file referenced externally before offering the file for you (by dry weight), even if your page shows the link, the server sends the entire file, if you can't "see" it.

  Save the file, can (and is) occasionally hang a program like Dw, especially when the server attempts to send the file to you and saving the file on the server at the same time.

  Using this type of editing is your decision.

  PZ

• Transfer blocked server and cannot migrate

  I want cold migrate my server transfer, but when the virtual machine is powered from the migration option is disabled (grayed out) in the right click menu. Annotations on the summary of the vm tab say Server locked transfer. I checked through the list of tasks and events and the lock has been applied 'Set machine virtual custom value.

  Is there a safe way for me to migrate the virtual machine and the locked annotation is just a coincidence

  The virtual machine is locked by the view while it is in active use. Put the transfer server in maintenance of the view interface user admin mode and it will become then unlocked and you can move it.

• Remove the snapshot from the server and then send a mail to me when the work is finished.

  Hi all

  Could someone help me with a script that would do this?

  Concerning

  Tyler

  This goes in the direction of what you are looking for?

  $snaps = Get-VM | Get-Snapshot
  Remove-Snapshot -Snapshot $snaps -Confirm:$false
  
  $emailFrom = "[email protected]" $emailTo = "[email protected]" $subject = "All snapshots are removed" $body = $snaps | select VM,Name,Created,SizeMB | ft -AutoSize | Out-String $smtpServer = "smtpserver"
  $smtp = new-object Net.Mail.SmtpClient($smtpServer)
  $smtp.Send($emailFrom, $emailTo, $subject, $body)
  

• change a string of html on the server and then download it.

  Hello!

  HM, is this the right plase to ask?

  Well, I have this

  var loader: URLLoader = new URLLoader();

  var request: URLRequest = new URLRequest ("http://www.this.de/board/" + aktuelle_adresse);

  loader.dataFormat = URLLoaderDataFormat.TEXT;

  loader.load (request);

  loader.addEventListener (Event.COMPLETE, Daten_Laden_Weiterverarbeitung);

  loader.addEventListener (IOErrorEvent.IO_ERROR, Streamfehler);

  }

  private function Daten_Laden_Weiterverarbeitung(e:Event)

  {

  [...]

  / / UMWANDELN DER SEITEN UND ALS STRING EINLESEN

  var str:String = e.currentTarget.data;

  str = str.slice (str.indexOf ("< tbody >'), str.indexOf ("< /tbody >"));

  so, use I have to download the code of hole.
  is it possible to download only the chain between < tbody > < / tbody > whitout using php thing other ore - so just in my code like?
  Thank you!
  HM, I hope this is the right place to ask. new looks.
  I'm German, sorry for my bad English.

  lol you can download the entire file or none of it.  but you can't download part of it.

• I have a game called minecraft and whenever I double click on it, it makes the windows of his mistake, I wonder microsoft security essentilials blocks? and how to unlock it?

  whenever I double click on minecraft he asks me if I want to run it (this can have no help, but I have windows xp home edition) and when I click on run he made the mistake of windows.

  I wonder if microsoft security databases blocks and how to unlock it?

  also to let you know it worked perfectly before, during 1 month but then this happened.

  IT IS THE WAY TO REINSTALL THE GAME
  Maybe you can solve the problem by opening it to the root folder
  example:(C:\Documents And Settings\Minecraft\Minecraft.exe) is just an example, not true
  buy the game at www.minecraft.net/store
  and install the standalone Executive for the game: https://s3.amazonaws.com/MinecraftDownload/launcher/Minecraft.exe
  then install the multiplayer "optional".
  Server: https://s3.amazonaws.com/MinecraftDownload/launcher/Minecraft_Server.exe
  or play free online with java:
  Solo: www.minecraft.net/classic/play
  Multiplayer: www.minecraft.net/classic/list.
  For the multiplayer mode, you will need to choose a server, and then you will be redirected to the game
  or download the game on all download sites free minecraft, that you can find. (although I don't know whether they are legal or not)

• Linux server and/or version?

  Is there the intention to make available for linux guests?

  Also, can I use it to connect to my network management server and then jump for my IOS devices?

  Best regards

  Tim

  Hi Tim,.

  We evaluate the implementation of a Linux client. You can use a jump server to connect to a Cisco device in the current building. However, you will need to hit the "Refresh button" bottom right of your Terminal Services session once you have successfully connected in the Cisco device supported. To initiate a refresh, you should see the process 'show version' detection and display of IOS. All supported IOS tools should be available then. See screenshot below.

  FOR INFO. Make sure you have rights to publish a 'show' version or the update will not work correctly.

  Let's automate this in a future release to make it as transparent as possible.

  Kind regards

  John

  Refresh.jpg

  

• The Lion Mountain Lion Server upgrade, then Mountain Lion Server

  Anyone successfully upgraded Lion Mountain Lion Server and then installed OS X Server in addition to this fusion 4.1.3?  I tried a few times (snap God for snapshots) to do over the weekend, but in vain. Mountain Lion seemed to install successfully more Lion Server, but when he tried to restart, restart failed with an error (just a generic error message was posted with no details on what the error was).  I even went so far as to turn off all server services and not allocate resources to Server services before installing Mountainn Lion, but that did not help all.

  I was able to upgrade properly Lion (not the version of the server) to Lion mountain with no problems, however.  Not sure why I can't installed on Server Lion Mountain Lion.

  Thank you.

  Hmmm... You can try to install the ML server first, and then run the migration wizard after it's done.

• CF 11 Enterprise install App Server and IIS 8.5 on Web server (different material)

  Hi all.

  Facing a problem of configuration to set up here.  We have the application inside the firewall server and we will have on the DMZ Web server and this web server has to forward the requests to the server see

  I installed cfusion instance HTTP Port 8500 remote Port 8010 host is a local host, with no cluster.  We will have other forums as a result of a port in addition to HTTP and distance on the line.

  So now the question is how to run the connector.  If I run the embedded {cfroot}/cfusion/runtime/bin/wsconfig.exe, it shows localhost as server applications, well, the web server must be IIS, but on another IP address NOT this server, so that the OK button remains grey.

  You would think that you would need to run the connector on the Web server, right?  Well, I do not have CF installed on it, nor do I intend install on my web server, so how do I get on the Web server connector.

  I read a post on taking a wsconfig.jar and pulling the DLL and others, but it is with JRun 8 CF, CF 11 and not IIS 8.5.  Maybe it's the method that I need to follow, but seems to be the new land that has never been displayed in the CF community.  I like to think I'm 'special' but really?  I'm the first to have this set up the configuration, and no one has posted a BLOG about it.  Looks strange OR I'm totally missing something.

  Please let me know any suggestions on how to move forward.

  Running on window server 2012 R2 for CF Application Server and the Web server.  CF 11 E update 3.

  ColdFusion 11 environment distributed for connector with all sites:

  1. install ColdFusion11 on the other server.

  2. Once you install CF11, then copy the jar file "wsconfig.jar" from this location C:\ColdFusion11\cfusion\runtime\lib on the IIS server.

  3. configure IIS in the other server. You need to enable the following features at the IIS level only.

  ISAPI extensions

  ISAPI filters

  CGI

  ASP .NET

  5 ColdFusion11 server to connect to the Web server via the Port connector, which is located in the server.xml file. You can find this file in the C:\ColdFusion11\cfusion\runtime\conf, once you open the file server.xml, this is the port that you want.

  Example: -.

  6. Once you check everything in ColdFusion server, then return to the IIS Web server computer.

  7. the wsconfig.jar file which you copied in this server, rename the .jar to .zip file extension an excerpt it.

  [8. create a file with the same structure here magic C:\ColdFusion11\config\wsconfig\{Magic_Number}--[nombre would be 1, 2, 3... n]

  {9. now go to the extracted folder wsconfig and check this isapi_redirect.dll, copy the DLL to the folder C:\ColdFusion11\config\wsconfig\{Magic_Number}. If you have 32-bit 32-bit copy if you have 64-bit DLL and then copy 64 bit DLL.

  Location of the DLL in the extracted folder

  The 64-bit IIS DLL is located in connector\isapi\intel-win64\prebuilt\amd64\isapi_redirect.dll

  The 32-bit IIS DLL is in connector\isapi\intel-win\prebuilt\isapi_redirect.dll

  10. in the same folder of magic_number create a 'isapi_redirect.properties' file and copy this content. Now, the location and the magic_number might be different.

  extension_uri = /jakarta/isapi_redirect.dll

  Log_file = C:\ColdFusion11\config\wsconfig\1\isapi_redirect.log

  LOG_LEVEL = info

  worker_file = C:\ColdFusion11\config\wsconfig\1\workers.properties

  worker_mount_file = C:\ColdFusion11\config\wsconfig\1\uriworkermap.properties

  iis_buffer_enable = true

  ip_restriction_file = C:\ColdFusion11\config\wsconfig\1\iprestriction.properties

  AUTH_COMPLETE = 1

  11. create another file 'uriworkermap.properties' and copy the content slot

  / cfformgateway / * = cfusion

  / CFFormGateway / * = cfusion

  / flex2gateway / * = cfusion

  /flex2gateway = cfusion

  / cffileservlet / * = cfusion

  / CFFileServlet / * = cfusion

  / cfform-internal / * = cfusion

  / flashservices/gateway / * = cfusion

  / flex-internal / * = cfusion

  rest / / * = cfusion

  /*. CFML / * = cfusion

  /*. MXML = cfusion

  /*. As = cfusion

  *.cfm = cfusion

  /*. Ft3/min = cfusion

  /*. Ft3/min = cfusion

  / * .cfm / * = cfusion

  *.swc = cfusion

  /*. CFML = cfusion

  /*. CFML = cfusion

  /*. CFML = cfusion

  /*. CFC = cfusion

  /*. CFC = cfusion

  /*. CFC = cfusion

  / * .cfc / * = cfusion

  /*. CFR = cfusion

  *.cfswf = cfusion

  /*. SWS = cfusion

  *.jsp = cfusion

  *.hbmxml = cfusion

  12. create another file "workers.properties" and copy this content

  Worker.List = cfusion

  Worker.cfusion.type = ajp13

  Worker.cfusion.Host = localhost

  Worker.cfusion.port = 8014

  Worker.cfusion.max_reuse_connections = 250

  13. now go to a folder that is C:\ColdFusion11\config\wsconfig and copy the "cfwin32.dll". Location

  wsconfig\connectors\installers\intel-win\prebuilt\cfwin32.dll

  wsconfig\connectors\installers\intel-win64\prebuilt\cfwin32.dll

  14 create a file 'wsconfig.properties' and copy the sub content. Number of bits could be changes to 32 bit if you use the 32-bit environment, this file contains site information and the IIS connector. I created this article that you configure the connector with ALL IIS sites, so set below will work.

  1 = IIS, 0, true, "", bitness64 "

  1.SRV = localhost, cfusion

  15. now that we have created all the files and folders. We will add the IP address of the machine ColdFusion11 if IIS can communicate with CF11. There are 2 places to add the IP address.

  a. "workers.properties" file, where is written "localhost" replaced by the IP address and

  b. "wsconfig.properties" where is also said to replace localhost with the IP address of the machine ColdFusion11.

  16. now we must work on IIS services manager, then start the IIS Manager. We will make any changes to the IIS server and when we restart IIS, it inherits all the mappings Manager and filter ISAPI in all sites.

  17. click on the server and then click handler mapping. Add a script mapping and Add .cfm, .cfc, .cfml, .cfr, and .cfswf managers and then point it to this DLL. C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll.

  Click request restrictions, select Invoke and select the files and folders, and Ok. In the right pane, click Edit feature authorization select run.

  Example: Ask the path:-*.cfm

  Executable:-C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll

  Name:-cfmHandler

  NOTE: Add these Manager you will use not all add them.

  18. click on IIS server and select default Document and add index.cfm as default document.

  19. click on IIS server and select ISAPI and CGI Restriction, select Add and 'ISAPI and CGI path' 'C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll', Description "tomcat_All". Check Allow extension path to run and press Ok.

  Click on change the function parameter in the right panel and check both boxes.

  20. click on IIS server and select the ISAPI filters and add a filter name 'tomcat' and the executable file "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll".

  21 now, add you a virtual directory to each site else it won't work. To add a directory virtual right click on your Web site and add a virtual directory. Alias name "jakarta" and the physical path "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll" press Ok.

  Follow this step with the same Alias and path even to all Web sites.

  22 restart the IIS service, and run any ColdFusion page. It will work.

• I've implemented all the information for an email from the Charter and then when I click on get mail, it says there is a connection to the server error... Why?

  I've implemented all the information for an email from the Charter and then when I click on get mail, it says there is a connection to the server error... Why?

  Hello ChevyDriver10,

  Thanks for your post.  What email app do you use to receive your mail?

  In the meantime, take a look at the Charter of General electronic installation instructions.

  If you do not currently have an e-mail client, feel free to go on Windows Live Mail.

  See you soon

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?