Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

Similar Questions

• Windows 7 will not be printed with the photo viewer and Picture Manager.

  Everytime I open an image file with Windows or Office Picture Manager Photo Viewer and try to print, I get 4 message boxes that said "your photos cannot be printed because this error occurred.

  There is nothing else that a button OK - not even one error code.

  The strange this is I can print almost anything with any other program very well. Firefox, Photoshop, all those print without problem. It's only the viewer Photo and Picture Manager that do this.

  The printer is an Epson RX595 with 64-bit drivers.

  My Office Picture Manager calls a dialog box that has a dropbox to define the printer. If you create an image of a document (*.mdi) you know it's the printer driver that has a problem.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Printing with the Photosmart 5514 problem!

  I have a Photosmart 5514 and have just started using it and I probably did something wrong as a beginner and I need help to solve the problem.
  How can I remove printing pending to be executed? I don't know why there is a print job in the queue and when I put in the book, nothing happens.

  Thank you very much

  Jeff

  I'd take a glance on the document below it will show you how to remove jobs from the queue.

  Click here for the document.

  Let me know how it goes.

• Cannot close the menu copy so we can print with the Photosmart C4580

  HP Photosmart C4580 all-in-One

  By mistake, we hit the button settings label number 3.  We do not have memory installed maps.  The instructions say that this:

  Otherwise, this button opens the copy settings menu.  Our problem is that we cannot close this menu so that we can print.

  We followed a hot and cold reset reset procedures without result.  The User Guide does not mention how to close this setting.

  So, we can now use the printer.  Can someone help us please?

  Thank you very much in advance,

  Yours,

  Sky22

  As I mentioned in the first post, I tried the hot and cold nothing works reset procedures.  I finally came to my senses and remove the printer and let windows 7 install the drivers again.  Then it worked.  I should have done that right away.

• interruption of the wireless connection with the computer laptop and printer

  We have a printer HP6500 we lost the connection Wireless to our Dell laptop.  Whenever we need to print to bring the laptop to the floor and connect it with a cable to print.  I tried to close the printer downstairs next to the laptop and the router but it would not print wireless.  Any other suggestions?  Thank you. CK

  Hello

  Check with HP, their drivers support and online documentation and ask in their forums on any
  known issues. As OEM HP is responsible for the good operation of the printer and provided them with
  drivers.

  More than one 6500 printer
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Try resetting the printer with the latest drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The photosmart c8150 print with the new ipad

  The photosmart c8150 print with the new ipad?

  Hi toddgas1,

  Unfortunately, this printer does not support Airprint or ePrint.

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.

• Not compatible with my photosmart 5510 564 HP cartridges

  Hello

  I have a photosmart 5510 printer I bought at the Japan. It came with a set of 178 cartridges.

  I moved to the Korea and bought a set of new cartridges HP 564 here because 178 cartridges are not available in Korea. In the box of cartridges it is said that the cartridges are adequate for the photosmart 5510.

  After the installation, I get an error "incompatible cartridge".

  If I use sureSupply via the HP utility to find compatible cartridges and I select the Korea as my current position, I get the following message:

  You have selected the following location: Korea

  Is this your current location? We have detected that the cartridges purchased at the location you have selected will not work with your printer. Common causes of this include:

  • you bought your printer in another country
  • you bought your printer on the Internet from a supplier in another country.
  • your printer has been provided by your employer who has moved to another country.
  • you have selected the wrong location on this Web site.

  Your printer can be reset to work in the location you have selected: Korea

  Contact HP support for more information on having your reset printer to work in this place.

  Below that there is a link 'Contact HP for support product' but if I click that I find myself on the sureSupply page and I have to choose my model and location. If I do that, I see a list of 564 cartridges I buy.

  Top of the page, there is a link "Contact HP" but this link (a javascript link) does nothing (in safari on OSX).

  How can I have my printer reset to work in Korea (with 564 cartridges)?

  @ JeroenKorea - if you bought the printer in an area and moved to a new area, you must call customer service to ask a "regionalization Reset." Avoid any accusation to this effect; It is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

  See the document on regionalisation.  I'm sure you already used this link, but I want to offer again.

  http://support.HP.com/us-en/document/c02558798

   

• Programs crash whenever I try to print with HP Photosmart C4750.

  I use Microsoft Office 2007 and Windows Vista (home). I just installed the driver for the printer HP Photosmart C4750, but I can't use it because everytime I try to print, the program that I try to print from crashes. I tried Microsoft Word and Notepad. In addition, I tried to go to Control Panel then 'printers' to try to remove the printer and then re-add, but as soon as I click the icon 'printers', Microsoft Explorer crashes too. I connect to the wireless printer. There is another user who is using this printer wireless and it works for them, and I do not believe that they are also using Windows Vista. I also tried turning off all protection antivirus and firewall, hoping that he would do something, but nothing is done. Please let me know if you have any advice. Thank you!

  Hello moonsparkle,

  The spooler crash when trying to open delete them the printer is a clue that you might have corrupted printer drivers.

  You can try the methods below to resolve this issue.

  Method 1:

  I suggest that you run the printer Troubleshooter that diagnoses and repairs printing problems automatically:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  Find the defective module that may be causing the application to crash when you try to print. You can start from the analysis of event viewer.

  You can consult the following article which will help you with this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can see the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also post the entry in your response if you have difficulties to find errors.

  Method 3:

  If nothing works, I suggest you reinstall the printer drivers. You can uninstall the printer from Device Manager drivers or uninstall the Photosmart software and try to reinstall the drivers.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Photos are not print with the photo cartridge

  Hello

  I have a Photosmart e 7510 and am trying to print photos.  I have installed HP Premium paper and HP Photo cartridge installed.  When I print the photos that are green - I printed both a progress report and a report of print quality and the cartridge photo is full but the magenta is empty.  It seems to me that the photos are print with regular color cartridges and not the photo cartridge.  Or photos using all the cartridges?  I correctly on all the printer settings and chose to 'better' than the quality of the photo.

  Any help is appreciated...

  The photo cartridge is just black photo, which is used to improve the nuances of black and colors in a photo. When photos are printed colours would be used to create the best possible performance. I could replace the magenta cartridge and printing resumes and see if that solves the Green tinting the problem you are currently experiencing. I hope this helps.

• Utility HP does not work with the new update of Mac software

  I downloaded the latest version of the software for my Mac and now utility HP will not work! Any advice? Thanks, Chris

  Hey Chris. Looks like you may have the old software out there which is not compatiable with the new version of Mac OS X. What I would do is a complete uninstall of the HP software you have. Let's try this:

  We will uninstall with the option 'raccoon' like this:

  1. go in Applications/Hewlett Packard / click on uninstall HP and click on continue

  2. Select your device in the left pane
  3. hold the keys Ctrl, Opt and Cmd and click on uninstall
  4. There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  5. click on continue and let it finish

  Now run a software update. Before doing the next step make sure you connect your printer to the computer through USB. Then click on the Apple in the upper left corner of the screen, then clicking on software updates.

  If my instructions don't do because here's a little video to help out you:

• Each page is printed with the word 'project '.

  CP1525nw

  All the pages I print, regardless of what program I have prints, prints with the word 'project '.   I am went through the maual, reset everything, check the tips here and may not know how to remove this watermark.

  I'm wasting toner, paper and time trying to get it to stop.

  I'm running on Mac Os X Snow Leopard.

  First of all, so much thanks to HP for a quick response.  Sorry you're solution did not work.

  I have check the updates of the system to Snow Leopard.  Behold, an update utility from HP printer (or something) worded as it was available.  Downloaded, installed and restart.  Whalla, problem disappeared.

  Go figure.

• I can't print with the printer canon pixma comment do?

  Adobe comment print with?

  Hi marie-josed29443125,.

  Do I understand correctly that you try to print from an application Adobe to a Canon Pixma? What application you use, and you are on Mac OS or Windows? Are you able to print to that you print from other applications (not Adobe)?

  In general, as long as you have the printer set up with the right connection and the printer driver, you should be able to print from applications, including those from Adobe.

  I suspect that you may be running in trouble with the printer, so please let us know if you have a specific problem with an Adobe application, and we will try to get it sorted.

  Best,

  Sara

• Problem with the bluetooth on my mac

  Hello everyone,

  I am a french and I have a problem with the bluetooth on my mac. My Magic Mouse has been suddenly disconnected from my mac. So I decided to reconnect my mouse. But this time, I couldn't do that because my mac (I think) did not detect the mouse. I said 'I think' because I am trying to connect this mouse on my son's mac and mac knew the mouse: it's only a problem of my mac.

  I went on the 'system preferences' to see if my mac know my mouse again, but no. While my mouse is light and bluetooth enabled. I tried with another mouse and it's the same result.

  So, what can I do?

  Thanks for your help,

  Merry Christmas!

  Roland Matt

  See "your device is not recognized by your Mac" here:

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.