Cancel the non-existent print jobs

Similar Questions

• NOR-488: The non-existent GPIB interface. During the generation of the Application in LV8.5

  Joined a vi that I'm building in an exe file.  It contains a single CONDUIT, but whenever I try to build it I get the following error...

  -----------------------------
  Error 7 is is produced to invoke the node in AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_FRAMEWORK.vi-> AB_Item_OnDoProperties.vi-> AB_Item_OnDoProperties.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer.
  =========================
  NOR-488: The non-existent GPIB interface.

  Name of the method: Build: Application
  -------------------------------

  I saw other people with this problem, and I tried their solutions.  I have quit labview, created a new project, new vi... no luck.  I can build on another box, but not mine.  He points to a configuration problem, but I can't.  Any suggestions?

  I just thought of it... While trying to think of everything that was different from when he worked in now... I realized that I turned off my firewall during installation!  I checked off and now the application will build.

  Thanks for the help of the crows Fan and I gave a congratulations for your post on the builder application error codes.

• My computer does not connect to the Internet. Event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."

  Hello!
  I am working on a Dell Inspiron 1300 laptop for a friend. She has Windows HP Home Edition, SP3 installed.
  He said that Saturday night he started to act funny and wouldn't connect to the Internet. There were a few popups then begins, and he did not know if they were connected to not go on the Internet.
  He had the rootkit.zeroaccess infection. I used Combofix to remove it. It won't always get on the Internet, either via a wi - fi or ethernet connection.
  Looking at the event viewer, I see event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."
  Then, event 7001, "(NLA) network location awareness service depends on the service protocol driver TCP/IP which could not start due to the following error: the dependency service does not exist or has been marked for deletion.".

  I copied ipsec.sys from another XP Home machine which worked and stuck in the Windows\System32\drivers directory and it still does not work.

  Any ideas are greatly appreciated!

  Dave

  Hello

  See this link:

  http://TechNet.Microsoft.com/en-us/library/cc958861.aspx

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=7003&EvtSrc=Service+Control+Manager&lcid=1033

  Let us know the results.

• Force evaluation of the rules for the non-existent entities and unknown attributes...

  Hi all
  
  I have another issue potentially easy for the gurus of the OPA in this forum - there must be a simple explanation to this question but I'm just not see it.
  
  The problem that I am having with several of my rules, it's that the conclusion is not evaluated due to the non-existent entity instances or unknown entity attributes. As an example of the first scenario, I have a rule that checks for the existence of an instance of an entity with a type and status. The conclusion is evaluated as if there is at least an instance of this entity, otherwise, the conclusion remains unknown.
  
  Similarly, I wrote an equation to annualize all its (financial) obligations in a case, where the frequency of the obligation can be weekly, fortnightly, monthly, etc.. I created an attribute for each type of frequency, which are then added to the equation. The issue in this example, is that the equation does not conclude if there is not a value for each attribute in the equation. For example, if:
  
  assign 1 = A + B + C
  
  where A = 1, B = 2 and C is unknown, does not examine the attribute from 1 to 3, but will remain unknown. Logically, I expect that the lack of a digital defaults to 0, and rather unknown attribute value, but this is not the case.
  
  I looked at the 'Certain and known operator rule examples' help topic to try to understand how assign a value to an unknown attribute, but the example at the bottom of the topic page does not provide a sufficient explanation as to how the logic:
  
  point of the total team = team 1 round points + points of the round 2 team + team of turn 3 points
  
  the team of the round 1 points = 0 if
  Round 1 team points (such as recorded by the team) is unknown
  
  the team from round 2 points = 0 if
  etc.
  
  It seems from the example that there are 2 attributes used to the same variable: [team of the Tower, 1 points] and [team of the round 1 points (such as recorded by the team)]. It is not clear to me how the original equation can be concluded if the values are stored in the alternate attribute [points of the round 1 team (such as recorded by the team)] etc.
  
  I have also considered using fragments of rule by the help topic "Prove an attribute using multiple rules", while I could use two equations separated to set the value of an attribute according to the circumstances, that is to say:
  
  assign 1 = A + B + C
  
  1 = 0 if attribute
  attribute 1 is unknown
  
  This attempt results in a logic loop error, probably because I am trying to set the value of an attribute based on the same attribute value.
  
  Any help will be greatly appreciated!
  Philippe

  Hi Philippe,.

  I suggest the following way to solve this problem, although there are other ways too.
  You can use a table of rules for it.

  Open a Working Document, and then press 'Alt + Z' created a rules table.

  Use the following rule: -.
  Keep the text in bold in the left-hand column and the text in italics as a condition for the title in the right column. Use a correct indentation during the compilation of the rules.

  -------------------------------------------
  Attribute 1
  -------------------------------------------
  *0*     any
  A is unknown or

  Uncertain East
  and
  any
  B is unknown or
  B is uncertain
  and
  any
  C is unknown or
  C is uncertain
  ----------------------------------------------
  Has any     
  B is unknown or
  B is uncertain
  and
  any
  C is unknown or
  C is uncertain
  ----------------------------------------------
  A + B C is unknown or     
  C is uncertain
  -----------------------------------------------
  A+B+C in the opposite case     

  Thank you
  Sofiane

• can not cancel 8500 hp officejet print job in windows 8

  I can't cancel print job on a HP officejet 8500 in windows 8

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!

• HP Color LaserJet CP2025dn UPD: Hp color laserjet cp2025 goes into cleaning/calibration in the middle of print job.

  HP Color LaserJet CP2025dn will be printing and stop suddenly and get into the routine cleaning or a calibration for no reason apparent.  This will be the last 5-10 minutes and then resume the print job.  It was produced for each 2-3 pages it prints.  I provide support for a medium-sized company, we are a print HP shop all, we use

  HP Color LaserJet CP2025dn UPD PCL 6. can someone help me solve this problem please.

  Thank you

  You must make changes by using the SAP or box below to tools:

  * Do not change/modify all settings for printer drivers. Let the printer with the default drivers.

  In the System tab and the management of the paper:
  Default paper size: letter or A4 size
  By default paper Type: plain
  Manual feed: Off
  Tray 1 size: any size
  Tray 1 Type: All types
  Tray 2 size: A4 or letter
  Tray 2 type: heavy 111-130g
  Size tray 3: A4 or letter
  Type tray 3: heavy 111-130g

  In document manipulation:
  Select specify time and Action.
  Paper at a time: 0 seconds
  Paper action: substitute

  In the tab system and print quality:
  Calibration of market: 60 Minutes
  The calibration setting: 168 hours

• Blocking of the Photosmart 5510 print job

  I get no output from my wireless printer. So, I checked the print queue and saw print jobs lined up behind a print job that I don't recognize that blocks all my legitimate print requests. I highlighted this first line and tried to delete. In the status column I get "delete - print" but employment niether draws or losses.

  What other option I have to remove this line so that I can start printing again?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• Prevents printing on the bottom HTML print job

  I have a print job that is set up in a Flash animation which works perfectly - during testing. As soon as I display the swf file in a browser window, the print job is the same as in Flash, but he captured the background color of the HTML page. Is there a way to get around this? My doc flash background is white, but my HTML experience is green. If the printed page is showing green background when I print from the swf file in a browser window.
  
  Is there a way to get around this?
  
  Thank you
  
  Julia

  I thought about it - she had nothing to do with my background HTML - all with tags in my HTML code to embed document. In case someone else has a similar problem: in order to have a movie background color to print dynamic content on white, I placed a white box in my clip at once the print job is created and developed across the box to the height and the width of the print job.

  Hope that helps!

• Impossible to cancel the import of drivers job

  Hi all,

  Mirage by train to test and well very convinced by the product.

  I have started to import drivers this morning and for some reason, that the task has been suspended for the last 3 hours and nothing happens.

  To mornitoring of the task is impossible to cancel it. Option is grayed out.

  Anyone know how to cancel the task in a different way? Maybe a SQL query to kill the task?

  See you soon

  SEB

  I know that this had to be rejected, but this may be good for someone in the future.

  (1) open CMD on the server machine

  (2) run the following command--"c:\Program Files\Wanova\Mirage".

  DBCommand Server\Wanova.Server.Tools.exe' 'SRVMIRAGE\VMWAREMIRAGEPOC '.<--(location of="" sql="" database="" server="" name\sql="">

  MirageDB<---(SQL database="" name)="" "delete="" from="" workqueue="" where="" id="">

  I have seen this command works, it has been provided by the development of this problem with another customer

• HP Photosmart Premium 310 has: not be deleted from the queue at the end of print jobs.

  Printing problems with Photosmart Premium 310 has.  Last job have not removed from the queue of items to print, even if the work is completed.  I have to go to the screen that shows what is printing and delete the item that was printed before the next item in the queue will be printed.  Any suggestions to fix this?

  Hello @shumaung and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems printing speed.  I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• DeskJet 2540: Deskjet 2540 stops in the middle of print job

  The printer is new. Its wireless printing, but to halfway through the work, it stops and an error message is displayed on the laptop.

  I ran the printer diagnosys and happened. I can't download the print doctor he asks me for a program to open with him.

  Help!

  Once, select a target folder and click Unzip (unpack), go to the unzipped folder and run the EXE file in this folder, you will see an update of current Windows.

  Don't forget to restart the PC once quick to do.

  Shlomi

• New hardware found of notification for a non-existent printer...

  I have XP on my machine.  I never had a printer HP color laserjet 8500 PS on my system, but Windows keeps telling me that he found this printer.  I can't disable this notification, and it appears at all times during my computer sessions.  Even allowing it to run and 'install' the printer does not solve the problem; It will go through the complete installation process every time if I let him.  This leads me into the wall! I need help to do that, go away!

  I have XP on my machine.  I never had a printer HP color laserjet 8500 PS on my system, but Windows keeps telling me that he found this printer.  I can't disable this notification, and it appears at all times during my computer sessions.  Even allowing it to run and 'install' the printer does not solve the problem; It will go through the complete installation process every time if I let him.  This leads me into the wall! I need help to do that, go away!

  Option 1: Buy one of these obsolete but still expensive printers: http://tinyurl.com/7san2xa

  Option 2: Remove HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\LPTENUM

  For more information on option 2, see http://support.microsoft.com/kb/298370
  Before you do anything like delete a registry key, make a backup first (free) C:\WINDOWS\ERUNT using and before to actually delete the key to export it to a *.reg file that you can use to restore it if things go wrong.

• Windows XP (SP3): Assistant of new equipment can detect non-existent "printer" at startup * AND * chronic blockages mouse

  In recent weeks, my copy of Windows XP (Service Pack 3) maintains 'detect' a 'printer' at startup, but can never find drivers for it, even through the Internet.  The new device Wizard never identifies the element as anything else as "Printer", or I don't see an unconfigured device listed in material anywhere, Manager even if the wizard repeat myself that the installation of the driver is not.

  I have a printer connected to the computer: an HP DeskJet 932 C printer.  However, the old driver worked very well, and I get this message regardless of whether if the printer is physically connected to the PC.  The printer was initially connected via a parallel cable, and I've been using a USB cable, with no improvement.  I also downloaded and installed the latest driver from the HP support site; still, there is no improvement.  I also followed the instructions on the linked page, and the problem persists:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;298370

  Finally, around the same time the "printer" problem has started, the PC started suffering from sporadic blockages mouse: at irregular intervals after the start (anywhere from a few seconds to hours), the mouse stops responding completely.  I tried using two different computer mouse (the two USB), and the problem has occurred at the same time.  I can't prove it, but given that these two problems seem to start at the same time, I tend to think that they are related.

  The PC itself is a Dell Optiplex GX260, with a 3.06 GHz P4 and 1.5 GB of RAM and plenty of space (20 + GB) of free space on the C: drive

  Please, please, * help to please!

  Hi Ellakite,

  Glad to hear the problem is solved.

  Check if there are any drivers listed in the printer server properties and delete the same.

  You can use the command to remove drivers below. Follow these steps:

  a. click on start

  b. click command prompt

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. click on the port tab and remove port

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Z10 impossible access contacts or messages and the non-existent hub

  I got a Z10 now and during the installation I noticed that if I clicked on the "contacts" or "text messages'icons are not." I thought when I transferred all the data from my old divide that would correct itself, but it does not.

  None of my contacts or forwarded messages, and I Redid the transfer twice. My call log was transferred, but all entries are number only, no names. And I can't seem to be able to add these numbers to my contacts. I can't even enter the contacts and enter all my previous Info manually.

  I have no hub blackberry either and I asked the people who are in the same room to send me messages but I don't get them. I tried to reboot the device several times but nothing moves. I seem to be able to BBM surveys send, but not receive them.

  Seems that the only thing I can do is to make and receive calls and use the internet browser.

  Can any ideas on how I fix? I will go back to the store I had the phone of the future, but really looking for some information at this time if possible.

  Thank you.

  G

  Hi G and welcome to the community of BlackBerry Support Forums!

  Have you made software updates on your BlackBerry Z10? If this is not the case, there may be one available. You can do the update through the BlackBerry Link with your device, or by going to settings > software updates on the device itself.

  Thank you.