Blog comments will not be published

Similar Questions

• Install vmware tools in Debian 7.1 comments will not work

  Hello

  can anyone help with this, I tried to installthe vmware tools in a 7.1 Debian guest and got the following error:

  "VMware Tools 8.8.2 build-590212 for FreeBSD will not install on the operating system you are using. Please make sure that you install the version of VMware Tools that is appropriate for your operating system. »

  The client has been installed with the operating system other type > FreeBSD 64-bit.

  Any suggestions?

  Concerning

  Jens

  Hi Darius,.

  It's the amd64, but Linux > Debian 7 x 64 isn't available, I chose the 5 x 64 Version, it works.

  I wonder if I should buy the 9 workstation to have the correct choice available..., I would do that.

  I forgot to mention that I use version 8 of workstation.

  Thank you!

  See you soon

  Jens

• Blog active are not getting published

  Hi all
  
  I publish my complete site of an instance of management to another (the real-time publishing). The status is successful but is error in the log of the sites.
  Please find the log below:
  
  [2013-05-23 11:16:26, 163 STI] [ERROR] [Thread-156] [com.fatwire.search.asset] Exception indexable data recovery for FW_BlogParent:1365416220623
  com.fatwire.assetapi.common.AssetAccessException: Exception met during the reading of the U:FW_BlogParent:1365416220623 assets
  at com.fatwire.assetapi.data.BasicAssetDataReadStrategy.read(BasicAssetDataReadStrategy.java:169)
  at com.fatwire.assetapi.data.FlexAssetDataReadStrategy.read(FlexAssetDataReadStrategy.java:105)
  at com.fatwire.assetapi.data.AssetDataManagerImpl.read(AssetDataManagerImpl.java:125)
  at com.fatwire.search.source.IndexSourceIteratorImpl.next(IndexSourceIteratorImpl.java:89)
  at com.fatwire.search.source.IndexSourceIteratorImpl.next(IndexSourceIteratorImpl.java:35)
  at com.fatwire.cs.core.util.UnifiedIterator.next(UnifiedIterator.java:64)
  at com.fatwire.search.lucene.LuceneSearchEngine._deleteData(LuceneSearchEngine.java:341)
  at com.fatwire.search.lucene.LuceneSearchEngine._deleteData(LuceneSearchEngine.java:322)
  at com.fatwire.search.lucene.LuceneSearchEngine.index(LuceneSearchEngine.java:151)
  at com.fatwire.search.engine.SearchEngineLockWrapper.index(SearchEngineLockWrapper.java:55)
  at com.fatwire.search.util.AssetQueueIndexSourceUtil._processAll(AssetQueueIndexSourceUtil.java:101)
  to com.fatwire.search.util.AssetQueueIndexSourceUtil.access$ 000 (AssetQueueIndexSourceUtil.java:35)
  to com.fatwire.search.util.AssetQueueIndexSourceUtil$ indexingRunnable.run(AssetQueueIndexSourceUtil.java:51)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: com.fatwire.assetapi.common.AssetAccessException: com.fatwire.assetapi.common.AssetAccessException: com.openmarket.basic.interfaces.AssetException: filter 'BlogFieldCopier' does not exist
  at com.fatwire.assetapi.data.BasicAssetDataReadStrategy._getAssetDataFromAsset(BasicAssetDataReadStrategy.java:580)
  at com.fatwire.assetapi.data.BasicAssetDataReadStrategy.read(BasicAssetDataReadStrategy.java:139)
  at com.fatwire.assetapi.data.FlexAssetDataReadStrategy.read(FlexAssetDataReadStrategy.java:97)
  at com.fatwire.assetapi.data.BasicAssetDataReadStrategy.read(BasicAssetDataReadStrategy.java:156)
  ... 13 more
  Caused by: com.fatwire.assetapi.common.AssetAccessException: com.openmarket.basic.interfaces.AssetException: filter 'BlogFieldCopier' does not exist
  at com.fatwire.assetapi.def.AssetTypeDefManagerImpl.findByName(AssetTypeDefManagerImpl.java:102)
  at com.fatwire.assetapi.data.BasicAssetDataReadStrategy._getAssetTypeDef(BasicAssetDataReadStrategy.java:1022)
  at com.fatwire.assetapi.data.BasicAssetDataReadStrategy._getAssetDataFromAsset(BasicAssetDataReadStrategy.java:262)
  ... 16 more
  Caused by: com.openmarket.basic.interfaces.AssetException: filter 'BlogFieldCopier' does not exist
  at com.openmarket.gator.interfaces.FilterFactory.getFilterInstance(FilterFactory.java:37)
  at com.openmarket.gator.flexfilters.FlexFilterInstance.describeDerivedAttributes(FlexFilterInstance.java:292)
  at com.openmarket.gator.flexfilters.FlexFilterManager.getFilterInfo(FlexFilterManager.java:373)
  at com.openmarket.gator.common.TemplateFilters.getDerivedInfo(TemplateFilters.java:290)
  at com.openmarket.gator.flexgrouptemplates.FlexGroupTemplateManager.getDerivedInfo(FlexGroupTemplateManager.java:314)
  at com.openmarket.gator.flexgroups.FlexGroupManager.getDerivedInfo(FlexGroupManager.java:1762)
  at com.openmarket.gator.common.BaseFlexManager.getAttributesDefinitions(BaseFlexManager.java:2723)
  at com.openmarket.assetframework.complexasset.AssetManager.getAttributeDefs(AssetManager.java:1983)
  at com.fatwire.assetapi.def.AssetTypeDefManagerImpl.findByName(AssetTypeDefManagerImpl.java:94)
  
  I must exclude active blog when I post a new destination and run the separate installer for the blog? If yes then I'm able to publish only the assets of blog that I created in the source?
  
  Any help is appreciated.
  Pratush.

  Hello Pratush,

  The error you get is when the parent of Blog is being indexed. I'm guessing that you get these errors on the target server, finished publish it.

  The news module comes with two filters of Flex: BlogThumbnailCreator and BlogFieldCopier. The code for these is in fwblogs - 11.1.1.6.1.jar (for 11.1.1.6.1 Sites). You must deploy this jar on the target. You will need to also mirror or copy the BlogThumbnailCreator and BlogFieldCopier files to the filters on the target table. The publication does not only.

  If you are installing the module of items on the target server, which will deploy the jar and also create filters records (and also create the assets of the sample blog there).

  After the pot has been deployed and missing filters created, you can re - index the active associated Blog, so that they are in the contributor user interface.

  I hope this helps.

  Kind regards
  Stephan.

• my application will not be published in app World

  I recently built an application through generator app 2-3 days ago. The generator of the app shows that my app was reviewed and published the world of blackberry but I still don't see it in my office or in my smartphone. Please help me I really want to the app.

  They are being revised, so as soon as they are reviewed (and approved) applications will be available for release.

  I don't know if you've selected something to 'publish automatically? Or this will automatically with App generator? Sorry to answer your questions with more questions, but I'm not familiar with the App generator.

  Wait until your application has been reviewed and you see either "Approved" in the status column, this means that you manually publish your app. Or you see "for sale" in the status column, this means that your application is published in the world of BlackBerry and can be downloaded.

• My added texts and comments will not print on the .pdf more.  Did turn something off accidentally?

  The text that I added a file .pdf (& sometimes comment boxes) appear not when I print the .pdf.  He is used to.  Same thing with stamps, they are not printed on the document and they used to.  Do you have a something accidentally disabled?  I have Adobe Acrobat XI Standard.

  In the print dialog box, choose "Document and brands."

• question slides will not be published in project...?

  Hello

  I have a situation where the slides in question in my project are not published... and aas a result, there is no questions to answer...:-/

  Anyone know why this could be...? using CP7

  See you soon
  Sabine

  problem solved... has help and slides glossay upward before the questions, now the question slides very well publish...

  See you soon

  Sabine

• Chinese characters on IE comments will not appear.

  On my comments, when I go to a website that contains Chinese characters, they not displayed in IE.  I see are a bunch of small squares.  It works fine on my host computer running the same operating system.  What is a short entry for VMware Server?  Can I correct the problem?  Thanks for your suggestions.  Enjoy, John.

  Host and guest systems:

  Windows XP Pro x 64 edition;

  VMware Server 2.0.0 build 116503

  Chinese characters are not installed by default.  You must install them on the guest operating system.

  http://KB.IU.edu/data/AELP.html

  Try this site.

• Blog post not to publish

  We have a Web of BC site where the blog is essentially the conduct for our public content.

  However, when adding a new blog under one of the existing blogs, save and publish pushes a notification "Article saved successfully Details". Copy-paste the URL of the Publisher and I get redirected to the page but nothing of the blog appears. Note that I don't get a 404, but only that the post itself is not displayed.

  The button "Save and publish", instead replaced by the "Update" button, is still recorded and released.

  View the source code, < div id = "catblogoutput" > < / div > is empty. Nothing in there.

  Then I'll go back to the list of blog on the side posts admin, and the new post is here.

  Is this a bug? Something is happening in which maintenance? A new setting took place that I may have missed?

  It has something to do with the date. I just tested it and I was able to replicate. If I put the date by a day in the past, it shows. So, you will need to do this if you do not want to see this delay or reach out for support and present an air ticket and the team will explore more front for you.

  See you soon,.

  -mario

• Why my published HTML file will not play?

  Hello

  When I double click to play the published HTML, the browser page remains blank and I get the following errors:

  Webpage error details

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; HC; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; MDDS; Tablet PC 2.0; NET4.0C;. NET4.0E)
  Timestamp: Tuesday, June 29, 2010 22:45:19 UTC

  
  Message: Invalid character
  Line: 1
  Char: 1
  Code: 0
  URI: rameters.zip/standard.js file:///C:/Users/rstein/AppData/Local/Temp/Temp1_Advanced-Trade-Management-ATM-Strategy-Pa

  
  Message: 'SWFObject' is undefined
  Line: 20
  Char: 5
  Code: 0
  URI: rameters.zip/Advanced-Trade-Management-ATM-Strategy-Parameters.htm file:///C:/Users/rstein/AppData/Local/Temp/Temp1_Advanced-Trade-Management-ATM-Strategy-Pa

  
  Message: "document.getElementById (...)' is null or not an object
  Line: 34
  Char: 3
  Code: 0
  URI: rameters.zip/Advanced-Trade-Management-ATM-Strategy-Parameters.htm file:///C:/Users/rstein/AppData/Local/Temp/Temp1_Advanced-Trade-Management-ATM-Strategy-Pa

  Is that what I can do about it?

  Thanks in advance.

  Ray

  Hello

  I don't think that you can do. When you try to play a file from a zip, I believe that only this file is checked out and open. Dependent files are still locked inside of the zip and the file you played cannot find them. I bet if you unzip the file into a folder, then try to read the HTML file, you will not see the questions.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed.

  Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed. The system works fine with Sata 600 pro SSD for windows and WD 4 TB Black seagate for storage. When the Intell 900 PCIe SSD drive is installed the system hangs at the LSI Mini OROM screen remains white. is there a way to put the LSI controller to jump the PCIe slots for boot devices?

  2 X Xeon 2695, 64 GB Ram, graphics Nvidia Quadro K5000, 2 X Intel 10 GB Ethernet card.

  Thanks for the reply. In fact I've disabled the LSI controller and connected to the integrated SATA controller and the Z820 starts and works perfectly with the PCIe SSD installed.

  Thank you.

• Movie Maker 6.0 serious on DVD, then published original, and now it will not play?

  My daughter has made a movie about Movie Maker 6.0 and it burned on a dvd.  She then had to change the original.  Once it was published, it does not work on Movie Maker 6.0.  She cannot do anything with it.  Help.  It's a slideshow from Graduation.  Garduation is today!

  It is unclear what has happened and why the project will not play.
  It may be interesting to try to open Movie Maker 6 and go to... Tools /.
  Options / Compatibility tab and disable all filters / OK.

  If this does not help... I think would be best to start
  Over and re - create the project.

• Adobe Captivate 9 will not publish my project

  Anyone has an idea why Captivate will not post my project? I get an error message when I click on "publish".

  Please show a screenshot of your error message.

  Try experimenting with a copy of your current project, hide slide groups to see if you can then publish.  If it works usually it indicates there is something on one of the hidden slides that prevented the successful publication.  Then you can narrow things down until you find the culprit.

• Hi, my creative cloud libraries will not work. I get a comment to "something went wrong during the initialization" and I can't save anything in a library. what I am doing wrong?

  Hello

  my creative cloud libraries will not work.

  I get a comment to "something went wrong during the initialization" and I can't save anything in a library.

  what I am doing wrong?

  

  Hi Rachel,

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to make a bet to

  Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. make a comment?

  Error code 2: Creative Cloud Desktop app update failed:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.htmload

• All of a sudden, after some editing, my published on catalyst for business slide shows thumbnail will not play.  Which should solve?

  This who should I troubleshoot when all of a sudden after a few changes, my published at the business catalyst miniature slideshows will not play?  They appear on the page, but the characteristics of the States do not work.

  Hello

  Please make sure that "Auto run" is enabled in the slide show options and republish the site.

  In the case it don't fix the part of problem please the site url so that we can take a look.

  

  Concerning

  Vivek